I agree with John's comments: You need a min. cpu speed of 170Mhz on a 51b
box to run FV/FD.
You can check the speed of your cpu by running the following from vt100:
"psrinfo -v"
Peter
----------
From: John Metsker
Sent: Thursday, April 26, 2001 10:59 AM
To: 'Foxboro DCS Mail List'
Subject: RE: Minimum RAM for FoxView
CPU speed is also very important. Don't try to run FoxView on
anything less than a Sparc 5/170 MHz (B box that is either a recent ship
from Foxboro or has received a motherboard upgrade). You will not be happy
with the performance. D and E machines are no problem.
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All
postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the
list sponsor(s) blameless for any and all mishaps which might occur due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
