Minimun RAM for FoxViewPedro,
We upgraded from 4.3 with DM to 6.2.1 with FoxView. We had one dual
headed AW51B with 64 Mb of ram and one dual headed WP51B with 32 Mb. We had
problems with the AW until we reached 128 Mb and with the WP until we
reached 96 Mb. At 96 the AW would still reboot by itself if we tried to
open several programs at the same time. I did not want to be marginal on
memory so I added another 32 to each workstation. Foxboro did not object in
selling more memory, so I ended up with 160 in the AW and 128 in the WP.
We have a 2.1G drive and have not had problems. We are still using the
legacy historian.
Loyd Greer
----- Original Message -----
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, April 26, 2001 9:07 AM
Subject: Minimun RAM for FoxView
We are to change our IA system (AW51B with 4.3 software) from DM to FoxView
(and 6.2.1 software).
We have only 32 Mb in some of our WP and 64 Mb in our AW.
What's the experience of the Users about the "real" minimun RAM required
(and disk space) to work with two FoxViews per station? Foxboro, in the
installation Notes of this version, ask for only 32 Mb but we think that is
not a "real" number...
Thank you in advance and best regards.
Pedro Hernandez
Process Control Manager
REPSOL-YPF Quimica
Puertollano (C.Real)
SPAIN
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All
postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the
list sponsor(s) blameless for any and all mishaps which might occur due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
