I have had the same problem with an AW51C.
It was the TAC answer (Jon Davis):
File system check (fsck) will not clear the needs maint
flag. This can only be reset by reloading the meta database.
The flag "needs maintenance" gets set when there is an
error when accessing a particular partition. I suggest you check the
messagesfile ( /var/adm/messagesfile.0 ) or if you have many, check them all to
see what error were encountered If they are frequent, your hard drive is
probably going bad and will need to be replaced.
FOX_TAC
The procedure to reload the meta database is in HH745 (section B. 51 Series
Only).
Regards
Alexander
[EMAIL PROTECTED] con fecha 02/05/2001 04:57:00 AM
Destinatarios: [EMAIL PROTECTED]@Internet
CC: (cci: ALEXANDER MILLAN/MILLANAR/SV/PDVSA)
Asunto: Problems with concatenated and mirrored disks on AW51B
Hello
At our site we have an AW51B with 4x 2.1GB disks (2 concatenated main, 2
concatenated mirror). In addition we have one set of 2x 2.1GB disks spare;
these are exchanged for safekeeping as a backup.
Some time ago one of the disks (on ESP1) gave us problems while doing the
mirroring process. (Error messages listed below)
d5: d15: 6478240 ESP0 / SCSI3 Okay
d25: 6478240 ESP1 / SCSI3 Nds_Maint
I have tried to replace the disk several times(the disk has been given SCSI
address 2 and 3 on ESP1). I have tried HH835, but I'm still having the same
problem.
The exchange disk is a 18.2GB 10000rpm Disk UniPack purchased from a local
vendor. The disk has been labeled and made to look like 2.1GB as prescribed
by Foxboro.
Foxboro recommends us at this time to exchange the 3 sets of concatenated
disks with one single disk with a larger size.
Has anyone solved a similar problem? Thanks for any response.
Per-Erik
--
Per-Erik Warsted
Norsk Hydro ASA
Hydro Agri Porsgrunn, Norway
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All
postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the
list sponsor(s) blameless for any and all mishaps which might occur due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
*************** PDVSA�S INTERNET E-MAIL USE ***************
This message may contain information solely of the interest of PDVSA or
its businesses. Copying, distribution, disclosure or any use of the
information contained in this transmission is permitted only to
authorized parties. If you have received this e-mail by error, please
destroy it and notify [EMAIL PROTECTED] or the sender by reply email.
****** USO DEL CORREO ELECTRONICO DE PDVSA HACIA INTERNET ******
Esta nota puede contener informacion de interes solo para PDVSA o sus
negocios. Solo esta permitida su copia, distribucion o uso a personas
autorizadas. Si recibio esta nota por error, por favor destruyala y
notifique al remitente o a [EMAIL PROTECTED]
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All
postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the
list sponsor(s) blameless for any and all mishaps which might occur due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
