I tried to modify the ACTION Parameter this morning via omset
(AW70 with Profibus I/O (ECB102, ECB103)) and it worked perfectly.
Regards,
Holger Dahl
----- Original Message -----
From: "Stear, Bo" <[EMAIL PROTECTED]>
To: "'Foxboro DCS Mail List'" <[EMAIL PROTECTED]>
Sent: Tuesday, July 31, 2001 3:48 PM
Subject: RE: Putting ECBs on/off line without using System Monitor
> The reason you can not set the ACTION bit with omset is because it is NOT
SETTABLE. However, one can still set it with the ever hazardous tool
'setpars'.
>
> -----Original Message-----
> From: Michael J Wing [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, July 31, 2001 8:43 AM
> To: [EMAIL PROTECTED]
> Subject: RE: Putting ECBs on/off line without using System Monitor
>
>
>
> When I try to set the ACTION parameter with omset (only testing!) I get an
errror code of 15. This corresponds to "omopenlist already open". Is this
perhaps because I'm talking about an ECB that is used to communicate with an
AB PLC on an AW51 integrator rather than a more common FBM ECB? omget for
this parameter returns a 0.
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Holger Dahl
> Sent: Tuesday, July 31, 2001 2:37 AM
> To: [EMAIL PROTECTED]
> Subject: Putting ECBs on/off line without using System Monitor
>
>
>
> David,
>
> You can set the ACTION Parameter of the ECBs.
> Setting this Parameter to "1" turns the ECB on, setting
> it to "2" turns the ECB off.
>
> Regards,
> Holger Dahl
> ________________________________
>
> erpicon software development GmbH
> Neusser Str. 724-726
> 50737 Koeln
>
> Tel: 0221-97460-70
> Fax: 0221-97460-99
> Email: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
>
>
> -----------------------------------------------------------------------
> This list is neither sponsored nor endorsed by the Foxboro Company. All
> postings from this list are the work of list subscribers and no warranty
> is made or implied as to the accuracy of any information disseminated
> through this medium. By subscribing to this list you agree to hold the
> list sponsor(s) blameless for any and all mishaps which might occur due to
> your application of information received from this mailing list.
>
> To be removed from this list, send mail to
> [EMAIL PROTECTED]
> with "unsubscribe foxboro" in the Subject. Or, send any mail to
> [EMAIL PROTECTED]
>
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All
postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the
list sponsor(s) blameless for any and all mishaps which might occur due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
