On Tue Apr 4 12:47:27 2000 Bakke, Richard A wrote...
>
>Hello all,
>
> We are trying to communicate from an AB Gateway 30 to an AB CL5550 PLC through
>the serial
>port on the front of the PLC, without success so far. Has anyone done this?
>
I have not done this, but let me sugest a few things. The post (Chanel
0) can look just like a KF2. But you need to make certain that it's in
DF1 mode, and not user mode. If you can hook up your AB programing
software to this port, and make it work, then you will know it's in the
corect mode. If you are usin AI serries programing software, it can
auto detect teh baud rate, parity et all for you.
Hope this helps.
--
Stan Brown [EMAIL PROTECTED] 843-745-3154
Westvaco
Charleston SC.
--
Windows 98: n.
useless extension to a minor patch release for 32-bit extensions and
a graphical shell for a 16-bit patch to an 8-bit operating system
originally coded for a 4-bit microprocessor, written by a 2-bit
company that can't stand for 1 bit of competition.
-
(c) 2000 Stan Brown. Redistribution via the Microsoft Network is prohibited.
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All
postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the
list sponsor(s) blameless for any and all mishaps which might occur due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
