At 08:42 AM 5/2/00 -0500, Daren Bishop wrote:
> I know this is no help to you, but I run Go-Global here and our '95
> machines do fine. However, I have '98 SE on my home PC and have
> similar problems. In ICC sometimes I have to repick all the fields
> (which are blank) to get data to appear and then it will allow me
> to enter values, the same happens in Select.
Thanks, Daren, and everyone else who offered a hint/tip about this
problem. It turned out to be Win98-related rather than an XVision or
dmcfg set up problem.
Here's the problem description in case you are curious:
Picking any of the data entry areas in the Select screen or in the
Control Configurator to enter data will not show any outward difference
in the Select screen, and only the foreground color changes in the CIO
Configurator. There's no indication of the cursor position in these
fields, which can be disconcerting if you wish to insert text into a
certain position.
I guess we'll live with this for now.
Regards,
Duc M. Do
Dow Corning Corp.
Carrollton Plant
Carrollton, KY, US
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All
postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the
list sponsor(s) blameless for any and all mishaps which might occur due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
