Hi Gang,
we have an on and off problem with the PrintScreen facilities on the Foxboro
and I'm a bit lost why. I think the problem started when we upgraded to 6.1.
The Colour printer HP1200 (LP14) is connected to the AP51B parallel port.
>From the AP, I can print to the HP1200 with "lp -d LP14 filename" without
any problems. If I do the same from a WP51B, the command is accepted and if I
do a "lpstat LP14" the job is queued as LP14-xxx. Yet, the file never goes to
the printer. If I do "lp -d LP00 filename" from a WP, it's going Ok to LP00
(alarm printer).
After a reboot of a WP, "lpstat -a" always shows "LP14 not accepting request.
Reason unknown" and I always have to do "lpc up LP14". After that "lpstat -a"
shows that LP14 is accepting requests since xxxx but I'm still unable to print
from the WP, well, most of the time. Restarting "lpsched" on both the AP and
the WP makes no difference.
This problem is getting a bit up my nose....
Am I alone with this problem or is this a common one?
Any help would be much appreciated.
Regards,
Frits Schouten.
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All
postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the
list sponsor(s) blameless for any and all mishaps which might occur due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
