Alan J Schaff wrote: > > We are planning on replacing an AW51B with a new one. I know that the MAC > address will need to changed so the CP's and FBM's can boot. However, I have > been unable to find the procedure to make the change. Does anyone out there > have one handy they could post? Its actually possible to chenge the MAC address of the interface with ifconfig. You could set the new box to have the same MAC address as the old one. > > Thanks, > Alan Schaff > BASF Corp. > > ----------------------------------------------------------------------- > This list is neither sponsored nor endorsed by the Foxboro Company. All > postings from this list are the work of list subscribers and no warranty > is made or implied as to the accuracy of any information disseminated > through this medium. By subscribing to this list you agree to hold the > list sponsor(s) blameless for any and all mishaps which might occur due to > your application of information received from this mailing list. > > To be removed from this list, send mail to > [EMAIL PROTECTED] > with "unsubscribe foxboro" in the Subject. Or, send any mail to > [EMAIL PROTECTED] -- Darryl Bond ----------------------------------------------------------------------- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with "unsubscribe foxboro" in the Subject. Or, send any mail to [EMAIL PROTECTED]
