Hi Duc,
Thanks! I will go ahead & add the OAJ variables to init.user & proceed
with the "rebootations".
Does it matter that the variables are also in the wp51_glbls file? Or
does that file get re-created during each boot?
Stephen Murray
Asarco
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Friday, November 17, 2000 1:18 PM
To: [EMAIL PROTECTED]
Subject: RE: OAJ startup at boot
Here's what I have in my /usr/fox/wp/data/init.user file:
#
# set up the OAJ to collect op.actions from this station
OJL=$DMNAME
OJLOG=DLP13,Ehst04a
gctsize=14
dmtlist=OJLOG
the main setting is in the second line: make LP13 the default printer, and
enable the OAJ historian, which in our case is centrally collected into
hst04a.
I used to modified the wp51_glbls, but now I consolidate all of the
customzed changes into init.user. Much easier to manage since all the
setting are in one place.
And yes, by putting these setting into the init.user, all of your DM glbls
files are created with these setting and all of their operator actions are
collected automagically. No other action by you is needed.
Hope this helps, Steve.
Duc
This transmission is for the intended addressee only and is confidential
information. If you have received this transmission in error, please delete
it and notify the sender. The contents of this E-mail are the opinion of the
writer only and are not endorsed by ASARCO Inc. unless expressly stated
otherwise.
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All
postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the
list sponsor(s) blameless for any and all mishaps which might occur due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
