That is fine.But it shows wrongly in detail display and it is according to
CP.hOW TO cORRECR that?
Allen Hansie
>From: [EMAIL PROTECTED] (JOHN E ZIEGLER)
>Reply-To: "Foxboro DCS Mail List" <[EMAIL PROTECTED]>
>To: 'Foxboro DCS Mail List' <[EMAIL PROTECTED]>
>Subject: Re[2]: Period-Phase
>Date: Wed, 5 Sep 2001 08:57:17 -0400
>
> Following up. Gateway periods are listed in the B0193RL document.
> You can also display them in the ICC.
>
> In the ICC, under the "SHOW" menu pick, there is an option for "GW
> PROCESSING PERIODS." This lists all of the correct gateway period
> codes and their seconds between scans.
>
> Jack Ziegler
> Sunoco Chemicals
> Frankford Phenol Plant
>
>
>
>______________________________ Reply Separator
>_________________________________
>Subject: RE: Period-Phase
>Author: Roger Smith <[EMAIL PROTECTED]> at ~INTERNET
>Date: 9/5/01 6:31 AM
>
>
>The problem is with the detail display. The period parameter is configured
>to show CP periods, not gateway periods in the display configuration. With
>the blocks that can be in CP's and gateways (i.e. AIN's, CIN's, etc.) I can
>see how this might be problem difficult to overcome, but why are the MDSCAN
>and ABSCAN block displays not right either?
>
>Roger B. Smith
>Process Control Engineering Div.
>City of Atlanta
>
> -----Original Message-----
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED]] On Behalf Of Allen Hansie
>Sent: Tuesday, September 04, 2001 9:37 PM
>To: [EMAIL PROTECTED]
>Subject: Period-Phase
>
>Hi All,
>
>BPC of Our Modicon Gateway--MG is 1 sec.
>
> Now that in any block of that MG while I am setting Period as 4
>,Detail display if particular block is showing period as 10 sec and while I
>am setting Period as 5 detail display is showing Period as 30 sec.
>
> But Perid-Phase Parameter report using dbvu -s for that MG shows as
>below
>
> Period
> 0 1 2 3 4 5 6 7
>CP-sec 10 30
>Gateway 4 8
>
>As shown it is different for CP & MG. But in detail display it shows
>according to CP.So what is the actual scan time?
>
> In CP It takes Period as 4 ad Phase from 0 to 9 but in MG it takes
>Period
>
>as 4 and Phase from 0 to 3 only.Same for Period 5 also For CP It takes
>phase
>
>upto 29 and for MG upto 7 only.
>
>So I think what ever is seen in detail display og Block Of MG is wrong and
>is according to CP Only.
>
>Anybody is having the same condition?This create importance because we had
>one trip and timimg of alarm s were not matching and we thought according
>period of detail display.
>
>What is to done to correct the same?
>
>_________________________________________________________________
>Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
>
>
>-----------------------------------------------------------------------
>This list is neither sponsored nor endorsed by the Foxboro Company. All
>postings from this list are the work of list subscribers and no warranty
>is made or implied as to the accuracy of any information disseminated
>through this medium. By subscribing to this list you agree to hold the
>list sponsor(s) blameless for any and all mishaps which might occur due to
>your application of information received from this mailing list.
>
>To be removed from this list, send mail to
>[EMAIL PROTECTED]
>with "unsubscribe foxboro" in the Subject. Or, send any mail to
>[EMAIL PROTECTED]
>
>-----------------------------------------------------------------------
>This list is neither sponsored nor endorsed by the Foxboro Company. All
>postings from this list are the work of list subscribers and no warranty
>is made or implied as to the accuracy of any information disseminated
>through this medium. By subscribing to this list you agree to hold the
>list sponsor(s) blameless for any and all mishaps which might occur due to
>your application of information received from this mailing list.
>
>To be removed from this list, send mail to
>[EMAIL PROTECTED]
>with "unsubscribe foxboro" in the Subject. Or, send any mail to
>[EMAIL PROTECTED]
>
>
>
>**********************************************************************
>This email and any files transmitted with it are intended
>solely for the use of the individual or entity to whom they
>are addressed. If you have received this e-mail in error,
>please notify the originator.
>**********************************************************************
>
>-----------------------------------------------------------------------
>This list is neither sponsored nor endorsed by the Foxboro Company. All
>postings from this list are the work of list subscribers and no warranty
>is made or implied as to the accuracy of any information disseminated
>through this medium. By subscribing to this list you agree to hold the
>list sponsor(s) blameless for any and all mishaps which might occur due to
>your application of information received from this mailing list.
>
>To be removed from this list, send mail to
>[EMAIL PROTECTED]
>with "unsubscribe foxboro" in the Subject. Or, send any mail to
>[EMAIL PROTECTED]
>
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All
postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the
list sponsor(s) blameless for any and all mishaps which might occur due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
