Hi For me that was not depend on case of Win, I write my configurations: command line: c:\pp\bin\win32\make win32zip >rri You can use --debug : c:\pp\bin\win32\make win32zip --debug >rri
snapshot is in c:\pp\source compiler c:\pp\bin\win32 all directory like from install FPC 1.0.10 I notice that best directory for make is c:\pp I don't use PATH command in autoexec, make can use start directory &> don't work I change BASEDIR and INSTALL_BASEDIR in all makefile, but must try witch is obsolete, If You want , send me full detail log from MAKE (on private mail), I can look at it. Darek ----- Original Message ----- From: "Lee, John" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, January 16, 2004 1:12 PM Subject: RE: [fpc-devel]improve makefile > Darek, these are the make scripts that I have trouble with under win95 and > ME- I don't have win98 at present. They are supposed to work under win98 - > but I suspect they don't. What should happen is a complete make, from > scratch, of the compiler, rtl, ide and other units of the distribution and > then they should all be zipped into the 5-8 distribution files. As you saw, > what happens for me (and you) for win32 is something else. The go32v2 also > doesn't work! > > Peter says that the problem with ME is redirection - strangely it often > fails because echo xxx > jim doesn't create a file - but I think that there > are other problems too. Also he doesn't test makefile modifications on win9x > because he doesn't have it... but that doesn't explain why it doesn't work > on win95. Also the very strange thing is that these used to work for me on > win95 and ME until the makefiles became more complex recently and do more > detection of what already exists than before. > > I'd be grateful if you can try them under win98, and if they don't work send > the logs to [devel] and if you can suggest what's wrong with the makefile. > > I each case I unzip the v11 fpc.zip (from ftp.freepascal.org) into d:\fpk. > The unzipped utilities from the v10 distribution are in c:\pp\bin\win32 or > go32v2, and the starting v10 compiler is in c:/v10nw/bin/win32 or go32v2 > > TIA for any help. > > Regards John > > rem for win32 snapshots > set PP=C:/V10NW/BIN/PPC386 > set path=C:\PP\BIN\WIN32; > d: > d:\fpk > MAKE win32zip OPT="-Xs" SNAPSHOT=1 D:\FPK &> C:\MAKEW.TMP > > > rem for go32 snapshot > set PP=C:/V10N/BIN/PPC386 > set path=C:\PP\BIN\GO32V2; > D: > CD\FPK > MAKE go32v2zip OPT="-Xs" SNAPSHOT=1 D:\FPK &> C:\MAKE.TMP > > > -----Original Message----- > From: Darek Mazur [mailto:[EMAIL PROTECTED] > Sent: 15 January 2004 20:56 > To: [EMAIL PROTECTED] > Subject: Re: [fpc-devel]improve makefile > > > I have: > > C:/PP/BIN/WIN32/MAKE.EXE -C compiler distinstall > MAKE.EXE[5]: Entering directory `C:/pp/source/compiler' > C:/PP/BIN/WIN32/MAKE.EXE -C utils install > MAKE.EXE[6]: Entering directory `C:/pp/source/compiler/utils' > C:/PP/BIN/WIN32/ginstall.exe -m 755 -d C:/pp/source/../fpc-pack/bin/win32 > C:/PP/BIN/WIN32/upx.exe fpc.exe ppufiles.exe ppudump.exe ppumove.exe > Ultimate Packer for eXecutables > Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 > UPX 1.20w Markus F.X.J. Oberhumer & Laszlo Molnar May 23rd > 2001 > > File size Ratio Format Name > -------------------- ------ ----------- ----------- > 176640 -> 55808 31.59% win32/pe fpc.exe > 105984 -> 36864 34.78% win32/pe ppufiles.exe > 155648 -> 48128 30.92% win32/pe ppudump.exe > 117760 -> 40448 34.34% win32/pe ppumove.exe > -------------------- ------ ----------- ----------- > 556032 -> 181248 32.59% [ 4 files ] > > Packed 4 files. > C:/PP/BIN/WIN32/cp.exe -fp fpc.exe ppufiles.exe ppudump.exe ppumove.exe > C:/pp/source/../fpc-pack/bin/win32 > MAKE.EXE[6]: Leaving directory `C:/pp/source/compiler/utils' > > > maybe You must change then > BASEDIR > INSTALL_BASEDIR > > I move all to C:\pp > > and all name of file in bin\win32\*.exe change to small > > Darek > > ----- Original Message ----- > From: "Lee, John" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Thursday, January 15, 2004 8:38 PM > Subject: RE: [fpc-devel]improve makefile > > > > I agree with you. make cycle works ok for me for go32v2 and win32 on win95 > > and winme and I'd guess for win98 too, but the full make go32v2zip and > > win32zip don't! I've sent the logs to core but... Apparently the problem > is > > with redirection? I was told that they'd work on win98- but it sounds as > if > > they don't! The strange thing is that they used to work ok for me on win95 > > and me, I think until the modifications were made for cross compilation a > > few months ago. They are now IMHO just much too complicated - maybe > removing > > the checking would be a solution and just getting them to do what you tell > > them to do. What happens for me is that the win32 version under win95 does > > what's shown below, the go32v2 version come up with a lot of make error > > messages . Any ideas re the problem welcome... > > > > Sigh... > > > > Regards John > > > > command line... > > MAKE win32zip OPT="-Xs" SNAPSHOT=1 D:\FPK &> C:\MAKEW.TMP > > > > o/p to screen > > snip of process creates... > > > > process_begin: CreateProcess((null), D:/fpk/compiler/ppcross386.exe -iTO, > > ...) f > > ailed. > > process_begin: CreateProcess((null), D:/fpk/compiler/ppcross386.exe > > -iVSPTPSOTO, > > ...) failed. > > process_begin: CreateProcess((null), D:/fpk/compiler/ppcross386.exe -iSP, > > ...) f > > ailed. > > process_begin: CreateProcess((null), D:/fpk/compiler/ppcross386.exe -iTP, > > ...) f > > ailed. > > process_begin: CreateProcess((null), D:/fpk/compiler/ppcross386.exe -iSO, > > ...) f > > ailed. > > process_begin: CreateProcess((null), D:/fpk/compiler/ppcross386.exe -iTO, > > ...) f > > ailed. > > process_begin: CreateProcess((null), D:/fpk/compiler/ppcross386.exe -Ur > > -Twin32 > > -Xs -OG2p3 -n -Fi../inc -Fi../i386 -FE. -Xs -di386 -dRELEASE -Us -Sg > > syswin32.pp > > , ...) failed. > > make (e=2): The system cannot find the file specified. > > MAKE.EXE[6]: *** [syswin32.ppu] Error 2 > > MAKE.EXE[5]: *** [win32_all] Error 2 > > MAKE.EXE[4]: *** [rtl_install] Error 2 > > MAKE.EXE[3]: *** [installbase] Error 2 > > MAKE.EXE[2]: *** [fpc_zipinstall] Error 2 > > MAKE.EXE[1]: *** [zipinstall] Error 2 > > C:\PP\BIN\WIN32\MAKE.EXE: *** [win32zip] Error 2 > > > > makew.tmp > > C:/PP/BIN/WIN32/MAKE.EXE zipinstall OS_TARGET=win32 > > MAKE.EXE[1]: Entering directory `D:/fpk' > > C:/PP/BIN/WIN32/MAKE.EXE fpc_zipinstall ZIPTARGET=installbase > > ZIPNAME=basew32 FPC=D:/fpk/compiler/ppc386.exe ZIPDESTDIR=D:/fpk > > FPCMAKE=D:/fpk/utils/fpcm/fpcmake.exe > > MAKE.EXE[2]: Entering directory `D:/fpk' > > C:/PP/BIN/WIN32/MAKE.EXE installbase INSTALL_PREFIX=D:/fpk/../fpc-pack > > ZIPINSTALL=1 > > MAKE.EXE[3]: Entering directory `D:/fpk' > > C:/PP/BIN/WIN32/ginstall.exe -m 755 -d D:/fpk/../fpc-pack > > C:/PP/BIN/WIN32/ginstall.exe -m 755 -d D:/fpk/../fpc-pack/doc/fpc > > C:/PP/BIN/WIN32/ginstall.exe -m 755 -d > > D:/fpk/../fpc-pack/cross/i386-win32/bin/win32 > > C:/PP/BIN/WIN32/MAKE.EXE compiler_install > FPC=D:/fpk/compiler/ppcross386.exe > > ZIPDESTDIR=D:/fpk FPCMAKE=fpcmake > > MAKE.EXE[4]: Entering directory `D:/fpk' > > C:/PP/BIN/WIN32/MAKE.EXE -C compiler install > > MAKE.EXE[5]: Entering directory `D:/fpk/compiler' > > C:/PP/BIN/WIN32/MAKE.EXE -C utils install > > MAKE.EXE[6]: Entering directory `D:/fpk/compiler/utils' > > C:/PP/BIN/WIN32/ginstall.exe -m 755 -d > > D:/fpk/../fpc-pack/cross/i386-win32/bin/win32 > > C:/PP/BIN/WIN32/upx.exe fpc.exe ppufiles.exe ppudump.exe ppumove.exe > > Ultimate Packer for eXecutables > > Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 > > UPX 1.20w Markus F.X.J. Oberhumer & Laszlo Molnar May 23rd > > 2001 > > > > File size Ratio Format Name > > -------------------- ------ ----------- ----------- > > > > Packed 0 files. > > C:/PP/BIN/WIN32/cp.exe -fp fpc.exe ppufiles.exe ppudump.exe ppumove.exe > > D:/fpk/../fpc-pack/cross/i386-win32/bin/win32 > > MAKE.EXE[6]: Leaving directory `D:/fpk/compiler/utils' > > C:/PP/BIN/WIN32/upx.exe ppc386.exe > > Ultimate Packer for eXecutables > > Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 > > UPX 1.20w Markus F.X.J. Oberhumer & Laszlo Molnar May 23rd > > 2001 > > > > File size Ratio Format Name > > -------------------- ------ ----------- ----------- > > > > Packed 0 files. > > C:/PP/BIN/WIN32/ginstall.exe -m 755 -d > > D:/fpk/../fpc-pack/cross/i386-win32/bin/win32 > > C:/PP/BIN/WIN32/cp.exe -fp ppc386.exe > > D:/fpk/../fpc-pack/cross/i386-win32/bin/win32 > > C:/PP/BIN/WIN32/ginstall.exe -m 755 -d D:/fpk/../fpc-pack/msg > > C:/PP/BIN/WIN32/cp.exe -fp msg/errord.msg msg/errore.msg msg/errores.msg > > msg/errorf.msg msg/errorn.msg msg/errorpl.msg msg/errorpli.msg > > msg/errorr.msg msg/errorrw.msg D:/fpk/../fpc-pack/msg > > MAKE.EXE[5]: Leaving directory `D:/fpk/compiler' > > MAKE.EXE[4]: Leaving directory `D:/fpk' > > C:/PP/BIN/WIN32/MAKE.EXE rtl_install FPC=D:/fpk/compiler/ppcross386.exe > > ZIPDESTDIR=D:/fpk FPCMAKE=fpcmake > > MAKE.EXE[4]: Entering directory `D:/fpk' > > C:/PP/BIN/WIN32/MAKE.EXE -C rtl install > > MAKE.EXE[5]: Entering directory `D:/fpk/rtl' > > C:/PP/BIN/WIN32/MAKE.EXE -C win32 all > > MAKE.EXE[6]: Entering directory `D:/fpk/rtl/win32' > > as -o wprt0.o wprt0.as > > as -o wdllprt0.o wdllprt0.as > > as -o gprt0.o gprt0.as > > D:/fpk/compiler/ppcross386.exe -Ur -Twin32 -Xs -OG2p3 -n -Fi../inc > > -Fi../i386 -FE. -Xs -di386 -dRELEASE -Us -Sg syswin32.pp > > MAKE.EXE[6]: Leaving directory `D:/fpk/rtl/win32' > > MAKE.EXE[5]: Leaving directory `D:/fpk/rtl' > > MAKE.EXE[4]: Leaving directory `D:/fpk' > > MAKE.EXE[3]: Leaving directory `D:/fpk' > > MAKE.EXE[2]: Leaving directory `D:/fpk' > > MAKE.EXE[1]: Leaving directory `D:/fpk' > > settings pp=C:/V10NW/BIN/PPC386 path=C:\PP\BIN\WIN32; > > comspec=C:\WINDOWS\COMMAND.COM > > > > This e-mail and any attachment is for authorised use by the intended > recipient(s) only. It may contain proprietary material, confidential > information and/or be subject to legal privilege. It should not be copied, > disclosed to, retained or used by, any other party. If you are not an > intended recipient then please promptly delete this e-mail and any > attachment and all copies and inform the sender. Thank you. > > > > _______________________________________________ > > fpc-devel maillist - [EMAIL PROTECTED] > > http://lists.freepascal.org/mailman/listinfo/fpc-devel > > > > > _______________________________________________ > fpc-devel maillist - [EMAIL PROTECTED] > http://lists.freepascal.org/mailman/listinfo/fpc-devel > > This e-mail and any attachment is for authorised use by the intended recipient(s) only. It may contain proprietary material, confidential information and/or be subject to legal privilege. It should not be copied, disclosed to, retained or used by, any other party. If you are not an intended recipient then please promptly delete this e-mail and any attachment and all copies and inform the sender. Thank you. > > _______________________________________________ > fpc-devel maillist - [EMAIL PROTECTED] > http://lists.freepascal.org/mailman/listinfo/fpc-devel > _______________________________________________ fpc-devel maillist - [EMAIL PROTECTED] http://lists.freepascal.org/mailman/listinfo/fpc-devel
