Am 25.11.2017 um 22:19 schrieb Christo: > On Sat, 2017-11-25 at 18:27 +0100, Florian Klämpfl wrote: >> What happens if you compile them with -CX? > Same problem. > >>> Is there a way to instruct the compiler to use a larger data type >>> when >>> emitting this information to the assembler file? >> This makes no sense as the program code using this data would not >> know about this. > > That was a clue to show I'm in unfamiliar territory. > > I experienced the problem when using the supplied make file to build an > AVR RTL. When I compiled the unit by hand, it worked. I then noticed > that the problem seems to be related to the -g option. If I compile > the large unit with -gw3 it was fine but when I compile the large unit > with -g it gave the "Error: value of 65611 too large for field of 2 > bytes at 65609" type errors. > > I tried passing OPT=-gw3 to make, but then the system unit cannot > compile. Unfortunately this means I cannot use the current makefile to > compile AVR RTL with large unit files.
What command line do you use? _______________________________________________ fpc-devel maillist - fpc-devel@lists.freepascal.org http://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-devel
