Am 11.02.2022 um 22:20 schrieb BogDan via fpc-devel:
Hi,
Thanks a lot for your quick reply.
Adding ihxutil to path fixed the problem.
But the size problem is stil there, a simple 2 lines of code "begin; end."
generates over 32k of code. That code should not generate more than 8 bytes of code.
- no smartlinking?
- any high level language comes with some overhead
- begin end. is simply a bad tests. Getting rid of code any useful program
needs makes little sense.
- Z80 rtl is probably not optimized for size yet.
E.g. on avrtiny, the smallest program is 94 bytes, most space taken by the interrupt vector table and flash to ram
copying routines any program needs anyways, but in this case a lot of optimization has been spent in the compiler which
Z80 didn't receive yet.
Are there any flags that I need to use to make the code smaller?
Cheers,
BogDan.
On Friday, February 11, 2022, 03:14:46 PM GMT+2, Sven Barth via fpc-devel
<fpc-devel@lists.freepascal.org> wrote:
BogDan via fpc-devel <fpc-devel@lists.freepascal.org> schrieb am Fr., 11. Feb.
2022, 11:09:
Hello,
According to https://wiki.freepascal.org/Z80 fpc is able to compile pascal code
for z80.
Sadly I'm a newbie on fpc, therefore I have a few questions:
1. I changed a bit the build script from
https://wiki.freepascal.org/Z80#Building and I managed to build fpc, and when I
built a simple hello world file, the resulted tzx file seems wrong:
./ppcrossz80 -n -Tzxspectrum -PZ80
-Fu/path/to/fpc/lib/fpc/3.3.1/units/z80-zxspectrum/rtl -viwn -CX -XX test.pas
$ cat test.tzx
:105CF800314CEA0188E0214DE6373FED423E000293
:105D0800032BBD20FABC20F7FD2288E0F31100FE2A
:105D180021FDFD7AED477D121C20FC141236C321AB
....
It seems is an IHX format not tzx
Also the result for a simple hello world is way too big (over 20k) !
I assume that I'm passing wrong params to ppcrossz80. What params should I use?
Where I can find more info on this matter?
You need to make sure that the ihxutil built in
utils/ihxutil/<hostcpu>-<hostos>/ is available in PATH, so that the compiler
will do the conversion.
2. Is it possible to add z80 cross compilation target to FP IDE? The FP IDe shows me a few targets, but z80 is not there.
The text mode IDE can only ever compile for one CPU platform, so you need to
build it for Z80. Though I don't know right now whether this is enabled.
Regards,
Sven
_______________________________________________
fpc-devel maillist - fpc-devel@lists.freepascal.org
https://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-devel
_______________________________________________
fpc-devel maillist - fpc-devel@lists.freepascal.org
https://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-devel
_______________________________________________
fpc-devel maillist - fpc-devel@lists.freepascal.org
https://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-devel
