Jonas Maebe schreef:
On 09 May 2007, at 19:59, Vincent Snijders wrote:
I tried to create powerpc units for the lcl on an intelmac, but the
compiler crashes. Is this a known issue?
The compiler is trying to use RTL/packages units compiled by a native
ppc compiler (most likely the ones globally installed on the system).
Those cannot be used by a little->big endian cross compiler. Try instead
something like this:
make OPT="-n -Fu~/fpcinst/usr/local/lib/fpc/2.1.4/units/powerpc-darwin/*
-O2 -vei -ap" FPC=~/fpcinst/usr/local/lib/fpc/2.1.4/ppcppc clean all
Thanks for guiding me in the right direction. What actually happened is
that I created a native powerpc compiler (because I had set
crossinstall=1 on the make all command) and used that native compiler to
create my units. Now I am using the ppcrossppc (renamed to ppcppc) and
things are working.
PS: note that if you're doing this on mischi's iMac, it won't work when
linking:
/usr/bin/powerpc-darwin-ld: warning /sw/lib//libglib-1.2.0.dylib cputype
(7, architecture i386) does not match cputype (18) for specified -arch
flag: ppc (file not loaded)
That is not a problem, because I only provide lcl and related compiled
units. This should be enough for people who have the right libraries to
cross compile their applications. It does mean of course, I cannot test it.
Vincent
_______________________________________________
fpc-pascal maillist - fpc-pascal@lists.freepascal.org
http://lists.freepascal.org/mailman/listinfo/fpc-pascal