Hi, I tried to build a crosscompiler for palmos-arm and palmos-m68k but both failed to compile.
Here's the results for m68k make[5]: Entering directory `/home/andrew/programming/fpc/rtl/palmos' /usr/bin/mkdir -p /home/andrew/programming/fpc/rtl/units/m68k-palmos make[5]: *** No rule to make target `m68k/prt0.as', needed by `prt0.o'. Stop. make[5]: Leaving directory `/home/andrew/programming/fpc/rtl/palmos' make[4]: *** [palmos_all] Error 2 make[4]: Leaving directory `/home/andrew/programming/fpc/rtl' make[3]: *** [rtl] Error 2 make[3]: Leaving directory `/home/andrew/programming/fpc/compiler' make[2]: *** [cycle] Error 2 make[2]: Leaving directory `/home/andrew/programming/fpc/compiler' make[1]: *** [compiler_cycle] Error 2 make[1]: Leaving directory `/home/andrew/programming/fpc' make: *** [build-stamp.m68k-palmos] Error 2 and for arm: make[5]: Entering directory `/home/andrew/programming/fpc/rtl/palmos' arm-palmos-as -o /home/andrew/programming/fpc/rtl/units/arm-palmos/prt0.o arm/prt0.as arm/prt0.as: Assembler messages: arm/prt0.as:47: Error: cannot represent BFD_RELOC_RVA relocation in this object file format arm/prt0.as:49: Error: cannot represent BFD_RELOC_RVA relocation in this object file format arm/prt0.as:50: Error: cannot represent BFD_RELOC_RVA relocation in this object file format arm/prt0.as:54: Error: cannot represent BFD_RELOC_RVA relocation in this object file format arm/prt0.as:62: Error: cannot represent BFD_RELOC_RVA relocation in this object file format make[5]: *** [prt0.o] Error 1 make[5]: Leaving directory `/home/andrew/programming/fpc/rtl/palmos' make[4]: *** [palmos_all] Error 2 make[4]: Leaving directory `/home/andrew/programming/fpc/rtl' make[3]: *** [rtl] Error 2 make[3]: Leaving directory `/home/andrew/programming/fpc/compiler' make[2]: *** [cycle] Error 2 make[2]: Leaving directory `/home/andrew/programming/fpc/compiler' make[1]: *** [compiler_cycle] Error 2 make[1]: Leaving directory `/home/andrew/programming/fpc' make: *** [build-stamp.arm-palmos] Error 2 I cant read or write asm but the prt0.as file seems to be copied from the wince dir and it not for palm. Is anyone working with fpc and palm? Regards, Andrew _______________________________________________ fpc-pascal maillist - fpc-pascal@lists.freepascal.org http://lists.freepascal.org/mailman/listinfo/fpc-pascal