On 9/11/2026 4:15 PM, Christo Crause via fpc-pascal wrote:
I guess by Arduino you are referring to any ready made board where one
just hooks up wires?
Close enough, but not exactly, there's lots of the kinds of boards you
describe that aren't arduino, but for the sake of this discussion, that
definition fits well enough.
Here are some thoughts on two types of boards (there are many
different boards of course):
- Arduino Uno R4 (esp32-s3 module): Wifi + USB + 1x serial + CAN,
higher power consumption, limited FPC support in trunk (workable but
not straight forward).
I wasn't aware any of the arduino boards were supported by FPC, I was
actually tempted to mention to the op that FPC might not be a good
development platform, due to lack of support for arduino boards, but
since I hadn't checked to be 100 percent sure, I left that part out of
my reply.
Good to know such support is present, that might make some of my
projects more accessible to more platforms.
Where does one find the (limited) arduino support that is present in
FPC? I'd be curious if any of the boards I have are directly supported.
I realize the difference between arduino boards isn't all that
significant, so support for one is at least partially accessible to
other arduino boards. How would one (possibly) contribute to increasing
the number of boards supported?
I have probably half a dozen arduino boards here, along with the same
number of raspberry pies, as well as micro:bit and propeller/basic stamp
boards from parallax. I'm now beginning to wonder if FPC could be
adapted to work with the parallax propeller boards, since they aren't
(functionally) all that different from arduinos, just been around a
whole lot longer, and have more processors (in most cases)
This is probably a discussion better directed to the fpc-devel list, but
I'm just curious how difficult (or easy) it would be to support other
boards.
- Arduino Mega (atmega 2560): 3x serial, USB connected to one of the
serial ports
_______________________________________________
fpc-pascal maillist - [email protected]
https://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-pascal
