Hi Julian, libfprint from git master supports 147e:1001. See http://cgit.freedesktop.org/libfprint/libfprint/commit/?id=6fc5293e8330e65ed21c0e43a18b3be061933e74
Regards, Vasily On Fri, Jan 1, 2016 at 10:25 AM, Julian Sikorski <[email protected]> wrote: > Hi list, > > was there ever any new development for 147e:1001? libfprint-0.6.0 does > not seem to contain these drivers. > > Best regards, > Julian > > W dniu 22.03.2014 o 06:46, Julian Sikorski pisze: >> Hi Vasily, >> >> I don't know if it times out every time, but the results look the same >> from the user perspective. >> How do I know fprint_demo is ready for enrollment, and that I should >> continue with re-scanning the finger? >> >> Best regards, >> Julian >> >> W dniu 20.03.2014 09:04, Vasily Khoruzhick pisze: >>> Hi Julian, >>> >>> According to log, it looks like one control transfer (write reg) of >>> deinit sequence timed out. Does it happen all the time? >>> >>> Please note, that with latest changes all imaging devices do 5 scans >>> for enrollment. >>> >>> Regards >>> Vasily >>> >>> On Thu, Mar 20, 2014 at 9:13 AM, Julian Sikorski <[email protected]> wrote: >>>> W dniu 16.03.2014 11:45, Vasily Khoruzhick pisze: >>>>> Hi to all fingerprint scanner users, >>>>> >>>>> It's another call for libfprint testing. >>>>> >>>>> Good news to all UPEK 147e:1001 users - I've added support for that >>>>> device into upeksonly driver - so it worth testing. It also may work >>>>> for 147e:1002 device - just try to add its USB IDs into upeksonly.c >>>>> and use UPEKSONLY_1001 variant for it. >>>>> >>>>> Also I've improved image assembling utilities for all AuthenTec >>>>> scanners, so now match rate is a bit better for AES1660 scanner - so >>>>> all AES1660 are encouraged to test my changes as well. >>>>> >>>>> All changes are pushed into master branch of >>>>> git://github.com/anarsoul/libfprint.git repo. >>>>> >>>>> To obtain the code do: >>>>> >>>>> git clone git://github.com/anarsoul/libfprint.git >>>>> >>>>> Use instructions from [1] to compile and test it. Thanks! >>>>> >>>>> Regards, >>>>> Vasily >>>>> >>>>> P.S. PLEASE KEEP FPRINT MAILLIST IN CC! >>>>> >>>>> [1] http://lists.freedesktop.org/archives/fprint/2012-November/000330.html >>>>> >>>> Hello, >>>> >>>> 147e:1001 does not seem to be working here. When I open fprint_demo and >>>> pick a finger to enroll, the child window shows nothing for a while. >>>> When I scan my finger regardless, a scan will appear at some point, but >>>> with a message "enrollment failed due to bad scan data, press cancel to >>>> continue". Logs attached. >>>> >>>> Best regards, >>>> Julian > > _______________________________________________ > fprint mailing list > [email protected] > http://lists.freedesktop.org/mailman/listinfo/fprint _______________________________________________ fprint mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/fprint
