I am having a problem whit the uru 4000 sensor. I am getting a wrong interrupt
type back. Instead of the interrupt 56aa I am getting b194. I only have this
when I work on my cris processor. On my pc it works normal so I don’t think
something is wrong whit the sensor. The debug info is listed below
Can somebody help me or know what this interrupt type stands for?
fp:debug [fp_init]
fp:debug [register_driver] registered driver uru4000
fp:debug [find_supporting_driver] driver uru4000 supports USB device 045e:00ca
Found device claimed by Digital Persona U.are.U 4000/4000B driver
uru4000:debug [get_hwstat] val=01
uru4000:debug [set_hwstat] val=81
uru4000:debug [fix_firmware] encryption byte at 62e reads 07
uru4000:debug [set_hwstat] val=01
uru4000:debug [get_hwstat] val=81
uru4000:debug [auth_cr]
uru4000:debug [set_hwstat] val=01
uru4000:debug [get_hwstat] val=01
uru4000:debug [get_irq_with_type] type=56aa
uru4000:debug [get_irq] irq type b194
uru4000:debug [do_init] scan power up timeout, retrying...
uru4000:debug [get_hwstat] val=01
uru4000:debug [set_hwstat] val=81
uru4000:debug [fix_firmware] encryption byte at 62e reads 07
uru4000:debug [set_hwstat] val=01
uru4000:debug [get_hwstat] val=81
uru4000:debug [auth_cr]
uru4000:debug [set_hwstat] val=01
uru4000:debug [get_hwstat] val=01
uru4000:debug [get_irq_with_type] type=56aa
uru4000:debug [get_irq] irq type b194
uru4000:debug [do_init] scan power up timeout, retrying...
uru4000:debug [get_hwstat] val=01
uru4000:debug [set_hwstat] val=81
uru4000:debug [fix_firmware] encryption byte at 62e reads 07
uru4000:debug [set_hwstat] val=01
uru4000:debug [get_hwstat] val=81
uru4000:debug [auth_cr]
uru4000:debug [set_hwstat] val=01
uru4000:debug [get_hwstat] val=01
uru4000:debug [get_irq_with_type] type=56aa
uru4000:debug [get_irq] irq type b194
uru4000:debug [do_init] scan power up timeout, retrying...
uru4000:debug [get_hwstat] val=01
uru4000:debug [set_hwstat] val=81
uru4000:debug [fix_firmware] encryption byte at 62e reads 07
uru4000:debug [set_hwstat] val=01
uru4000:debug [get_hwstat] val=81
uru4000:debug [auth_cr]
uru4000:debug [set_hwstat] val=01
uru4000:debug [get_hwstat] val=01
uru4000:debug [get_irq_with_type] type=56aa
uru4000:debug [get_irq] irq type b194
uru4000:error [do_init] could not power up scanner after 3 attempts
fp:error [fp_dev_open] device initialisation failed, driver=uru4000
Could not open device.
_________________________________________________________________
Even niet achter je PC? Neem je Messenger mee op je gsm!
http://www.windowslivemobile.msn.com/nl-be
_______________________________________________
fprint mailing list
[email protected]
http://lists.reactivated.net/mailman/listinfo/fprint
