-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello,
I recently bought an Upek Eikon from Amazon (http://www.amazon.de/Upek-Fingerabdruck-Leseger%C3%A4t-Windows-Betriebssystem/dp/B001C3H4MQ/ref=sr_1_1?ie=UTF8&s=ce-de&qid=1226349133&sr=8-1) which I supposed would be running by the upekts driver, as noted in the "Supported Devices" listing. Unfortunately it is recognized as a 147e:2016 Device in lsusb, without any naming: Bus 003 Device 005: ID 147e:2016 When i try to enroll my finger via fprint_demo it doesn't do a thing. The bar is moving from left to right but my finger moving over the device is not beeing recognized/scanned/whatsoever. Any thoughts on this? Did I miss something? I'm hereby attaching the lsusb -vv log using libusb from reactivated.net Sincerely Martin Weinelt - --- Bus 003 Device 005: ID 147e:2016 libusb-compat debug: usb_open: libusb:debug [libusb_open] open 3.5 libusb:debug [usbi_add_pollfd] add fd 3 events 4 libusb:debug [libusb_get_next_timeout] next timeout in 0.999984s libusb:debug [handle_events] poll() 1 fds with timeout in 1000ms libusb:debug [handle_events] poll() returned 1 libusb:debug [reap_for_handle] urb type=2 status=0 transferred=4 libusb:debug [handle_control_completion] handling completion status 0 libusb:debug [ctrl_transfer_cb] actual_length=4 libusb:debug [libusb_get_next_timeout] next timeout in 0.999992s libusb:debug [handle_events] poll() 1 fds with timeout in 1000ms libusb:debug [handle_events] poll() returned 1 libusb:debug [reap_for_handle] urb type=2 status=0 transferred=10 libusb:debug [handle_control_completion] handling completion status 0 libusb:debug [ctrl_transfer_cb] actual_length=10 libusb:debug [libusb_get_next_timeout] next timeout in 0.999991s libusb:debug [handle_events] poll() 1 fds with timeout in 1000ms libusb:debug [handle_events] poll() returned 1 libusb:debug [reap_for_handle] urb type=2 status=0 transferred=4 libusb:debug [handle_control_completion] handling completion status 0 libusb:debug [ctrl_transfer_cb] actual_length=4 libusb:debug [libusb_get_next_timeout] next timeout in 0.999991s libusb:debug [handle_events] poll() 1 fds with timeout in 1000ms libusb:debug [handle_events] poll() returned 1 libusb:debug [reap_for_handle] urb type=2 status=0 transferred=44 libusb:debug [handle_control_completion] handling completion status 0 libusb:debug [ctrl_transfer_cb] actual_length=44 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.01 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x147e idProduct 0x2016 bcdDevice 0.02 iManufacturer 1 UPEK iProduct 2 Biometric Coprocessor iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 39 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 20 libusb-compat debug: usb_control_msg: RQT=80 RQ=0 V=0 I=0 len=2 timeout=5000 libusb:debug [libusb_get_next_timeout] next timeout in 4.999995s libusb:debug [handle_events] poll() 1 fds with timeout in 2000ms libusb:debug [handle_events] poll() returned 1 libusb:debug [reap_for_handle] urb type=2 status=0 transferred=2 libusb:debug [handle_control_completion] handling completion status 0 libusb:debug [ctrl_transfer_cb] actual_length=2 Device Status: 0x0000 (Bus Powered) libusb-compat debug: usb_close: libusb:debug [libusb_close] libusb:debug [usbi_remove_pollfd] remove fd 3 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkkgivcACgkQ81JD4BBlwVsCvQCdFYSP2BsIMCDOG90ifInFAC0U TioAnjHoP73MOa89j7jasqx7OIiDmisd =+WWR -----END PGP SIGNATURE----- _______________________________________________ fprint mailing list [email protected] http://lists.reactivated.net/mailman/listinfo/fprint
