Dear everyone.
I bought uru4000 fingerprint scanner with USB port. Now I want to use it in
Debian.
My OS environment is Linux Debian lenny, kernel 2.6.26, gcc4.3.2
I install the fprint following these step:
#sudo aptitude install libfrpint0 libpam-fprint libfprint-dev fprint-demo
then connect the URU4000
#lsusb
Bus 001 Device 007: ID 05ba:0007 DigitalPersona, Inc.
#dmesg
[ 4698.185486] usb 1-1: USB disconnect, address 6
[ 4701.001460] usb 1-1: new full speed USB device using uhci_hcd and address
7
[ 4701.942953] usb 1-1: configuration #1 chosen from 2 choices
[ 4701.983740] usb 1-1: New USB device found, idVendor=05ba, idProduct=0007
[ 4701.983747] usb 1-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 4701.983750] usb 1-1: Product: Biokey 200 A&T Sensor
[ 4701.983752] usb 1-1: Manufacturer: ZKSoftware Inc.
[ 4701.983754] usb 1-1: SerialNumber: {A125424F-41F4-1142-9106-971A67137B82}
# pam_fprint_enroll -f 7
This program will enroll your finger, unconditionally overwriting any
selected print that was enrolled previously. If you want to continue, press
enter, otherwise hit Ctrl+ C
Found device claimed by Digital Persona U.are.U 4000/4000B driver
Opened device. It's now time to enroll your finger.
You will need to successfully scan your Right Index Finger 1 times to
complete the process.
Scan your finger now.
-----------------------
Yes, It seem the scanner is working now, but it is dead there and the
console has no reponse and I have to hit Ctrl+C to stop it.
Also I try fprint_demo, but the same problem, when I Kick entroll to get
fingerprint, it is dead and the LED of the URU4000 light and no flicker.
Anyone can help me?
Look forward for your reply.
thanks.
Yao
--
Qi Yao
School of Information Science & Engineering Lanzhou University
_______________________________________________
fprint mailing list
[email protected]
http://lists.reactivated.net/mailman/listinfo/fprint
