Thanks very much for your suggestions. I fixed it, a day and a half later,
after installing the fonts through Font Book, not directly into the System 9
Fonts folder (which I thought I'd read somewhere was the same thing, but
maybe not).
Thanks.
Louise Moritsugu
From: Paul Findon <[EMAIL PROTECTED]>
To: [email protected]
Subject: Re: switched printers -- now HelvObl prints with extra slant
Date: Thu, 19 Apr 2007 14:09:09 +0100
On 19 Apr 2007, at 07:00, f"L MORITSUGU" <[EMAIL PROTECTED]> wrote:
I'm using FM 6.5, Mac, in Classic. I was printing to a Laserwriter Select
360, through an AsanteTalk bridge, and everything looked as it should.
I've just switched to a Lexmark E120n laser printer. Now it prints
Helvetica
bold oblique and Helvetica oblique with an additional slant. (I have not
checked if this is also happening with other fonts.)
I've reinstalled the fonts, then installed a different version (from a
colleague) of the fonts into the System 9 Fonts folder, and restarted FM,
with no change.
This also happened, before I switched the printers (machines), when I
made
pdfs from the FM files, either using a.) Save as, then Distiller, or b.)
Print to file, then Distiller.
It's probably something obvious, but I don't get it. Any ideas?
What font format are you using?
Does the issue also occur with other Mac OS 9 apps?
Does the issue occur with other fonts?
I always delete the TrueType Times, Helvetica, Symbol, etc., included with
Mac OS 9 and replace with PostScript Type 1 versions.
BTW, there's a bunch of Mac FrameMaker users on the FrameMaker for Mac OS
X discussion group at:
<http://tech.groups.yahoo.com/group/fmforosx/>
Paul
_______________________________________________
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubscribe send a blank email to
[EMAIL PROTECTED]
or visit
http://lists.frameusers.com/mailman/options/framers/lmoritsugu%40sympatico.ca
Send administrative questions to [EMAIL PROTECTED] Visit
http://www.frameusers.com/ for more resources and info.
_______________________________________________
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubscribe send a blank email to
[EMAIL PROTECTED]
or visit
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com
Send administrative questions to [EMAIL PROTECTED] Visit
http://www.frameusers.com/ for more resources and info.
