John...
This is just grasping at straws .. but do you have extra DLLs in the
\fminit\Plugins folder? All FDK DLLs in that folder (or subfolders) get
loaded when FM starts. If you've got extra DLLs that are duplicates of
others that could cause some problems.
I can't say what the proper list of mif2go DLLs should be, but if you
added two new ones, you may have needed to remove the two that were
being replaced.
And .. don't just move the old ones into a subfolder called "old" ..
they will get loaded there too.
...scott
On 8/14/14 2:40 PM, John Sgammato wrote:
Here's the latest, after an afternoon of research (= banging my head
against the wall):
* The project fails almost immediately, with this error:
Mif2Go failed for file: C:\Project\Users_Roles.html type 1, code
2, at: Wed Aug 13 15:46:36 2014
Could not run DCL filter or other program. File not found.
* All Mif2Go files are present and in the right places following an
uninstall and fresh install from new ZIP. This means I do not know
what file cannot be found.
* I get the same failure even for projects that succeeded earlier in
the day, with the same previously-successful ini files.
* I have used (and resolved issues with) Mif2Go for 10 years, so I
know how things should look - they look OK.
* The save process generates good MIFs. I get the same error for
each file, with the option to quit. If I do not quit, it makes a
mif for the next file and then I get the error again. Mif2Go.ini
increments normally for each file generated.
* If I push through to the end, it generates all the MIFs but it
does not clean them up and it generates no output, nor the _wrap
folder.
* The history and the log file look normal.
* All the Mif2Go exe & dll files have full write permissions,
including the two new ones in \fminit\Plugins.
And remember that the whole system worked flawlessly for two big books
before failing on the third, much smaller book just an hour later.
I appreciate any ideas!
On Thu, Aug 14, 2014 at 1:18 PM, Fei Min Lorente
<feimin.lore...@onsemi.com <mailto:feimin.lore...@onsemi.com>> wrote:
Nope, sorry, I should have mentioned. I'm on FM10, Windows 7,
using Mif2Go V4U54.
Fei Min
*From:*John Sgammato [mailto:john.sgamm...@actifio.com
<mailto:john.sgamm...@actifio.com>]
*Sent:* Thursday, August 14, 2014 1:15 PM
*To:* Fei Min Lorente
*Cc:* framers@lists.frameusers.com
<mailto:framers@lists.frameusers.com>
*Subject:* Re: Mif2Go suddenly failing on all machines
Are you on FM12?
There were two new DLLs in FMINIT/Plugins for FM12.
On Thu, Aug 14, 2014 at 1:12 PM, Fei Min Lorente
<feimin.lore...@onsemi.com <mailto:feimin.lore...@onsemi.com>> wrote:
Hi John:
I just did a Save Using Mif2Go on an old tried and true manual,
and everything worked just fine.
Fei Min
------------------------------
Message: 13
Date: Wed, 13 Aug 2014 18:18:24 -0400
From: John Sgammato <john.sgamm...@actifio.com
<mailto:john.sgamm...@actifio.com>>
To: Lin Sims <ljsims...@gmail.com <mailto:ljsims...@gmail.com>>
Cc: framers@lists.frameusers.com <mailto:framers@lists.frameusers.com>
Subject: Re: Mif2Go suddenly failing on all machines
Message-ID:
<CAKwJh11XjZFNVpgDEeA0MG=xi=0Q1oDxd0TZBsYvta=ddw1...@mail.gmail.com
<mailto:ddw1...@mail.gmail.com>>
Content-Type: text/plain; charset="utf-8"
I'd be very grateful if a few of my colleagues here could try a quick
mif2go save and see if you get the DCL not found error.
On Aug 13, 2014 6:15 PM, "Lin Sims" <ljsims...@gmail.com
<mailto:ljsims...@gmail.com>> wrote:
> And if you do find a fix, let us know, just in case someone else
runs into
> the same issue.
>
>
> On Wed, Aug 13, 2014 at 4:00 PM, Scott Prentice
<s...@leximation.com <mailto:s...@leximation.com>>
> wrote:
>
>> If you don't get anything here, you might try the new mif2go
list ..
>>
>> https://groups.yahoo.com/neo/groups/mif2go/info
<https://groups.yahoo.com/neo/groups/mif2go/info>
>>
>> ...scott
>>
>> On 8/13/14 12:53 PM, John Sgammato wrote:
>>
>> Yesterday I was generating a bunch of XHTML output with Mif2Go,
when
>> suddenly I started to fail with this error:
>> Mif2Go failed for file: C:\Project\Users_Roles.html
>> type 1, code 2, at: Wed Aug 13 15:46:36 2014
>> Could not run DCL filter or other program.
>> File not found.
>>
>> It had worked fine just an hour before. Nothing had changed.
>> Nonetheless I rechecked all my environment variables and other
common
>> issues; they were all good.
>> Restarting the machine did not fix it. A complete
uninstall/reinstall of
>> Mif2Go did not fix it.
>> Today is does not work on two different computers with
different files.
>>
>> Is anyone else experiencing this?
>> It's as if my license has been revoked or some similar global
denial of
>> service.
>>
>> --
>>
>> <http://www.actifio.com/> *John Sgammato, Documentation
>> Architect*
>> *e* john.sgamm...@actifio.com
<mailto:john.sgamm...@actifio.com> *c* 508.927.2083
<tel:508.927.2083>
>> *t* @actifiodocs <http://twitter.com/actifiodocs>
>>
>> 333 Wyman Street, Waltham, MA 02451
>> <http://twitter.com/actifio>
>> <http://www.linkedin.com/company/399246>
>> <https://plus.google.com/102870897962348937868/posts>
>> <http://www.youtube.com/user/actifio> <http://www.actifio.com/>
>>
>> *Radically simple copy data management *
>>
>> *.*
>>
>>
>> _______________________________________________
>>
>>
>> You are currently subscribed to framers as s...@leximation.com
<mailto:s...@leximation.com>.
>>
>> Send list messages to framers@lists.frameusers.com
<mailto:framers@lists.frameusers.com>.
>>
>> To unsubscribe send a blank email
toframers-unsubscr...@lists.frameusers.com
<mailto:toframers-unsubscr...@lists.frameusers.com>
>> or visit
http://lists.frameusers.com/mailman/options/framers/sp10%40leximation.com
>>
>> Send administrative questions to listad...@frameusers.com
<mailto:listad...@frameusers.com>. Visithttp://www.frameusers.com/
<http://www.frameusers.com/> for more resources and info.
>>
>>
>>
>> _______________________________________________
>>
>>
>> You are currently subscribed to framers as ljsims...@gmail.com
<mailto:ljsims...@gmail.com>.
>>
>> Send list messages to framers@lists.frameusers.com
<mailto:framers@lists.frameusers.com>.
>>
>> To unsubscribe send a blank email to
>> framers-unsubscr...@lists.frameusers.com
<mailto:framers-unsubscr...@lists.frameusers.com>
>> or visit
>>
http://lists.frameusers.com/mailman/options/framers/ljsims.ml%40gmail.com
>>
>> Send administrative questions to listad...@frameusers.com
<mailto:listad...@frameusers.com>. Visit
>> http://www.frameusers.com/ for more resources and info.
>>
>>
>
>
> --
> Lin Sims
>
_______________________________________________
You are currently subscribed to
framers.
To unsubscribe send a blank email to
http://lists.frameusers.com/mailman/listinfo/framers
Send administrative questions to listad...@frameusers.com
<mailto:listad...@frameusers.com>. Visit
http://www.frameusers.com/ for more resources and info.
End of framers Digest, Vol 106, Issue 12
****************************************
_______________________________________________
You are currently subscribed to framers as
john.sgamm...@actifio.com <mailto:john.sgamm...@actifio.com>.
Send list messages to framers@lists.frameusers.com
<mailto:framers@lists.frameusers.com>.
To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
<mailto:framers-unsubscr...@lists.frameusers.com>
or visit
http://lists.frameusers.com/mailman/options/framers/john.sgammato%40actifio.com
Send administrative questions to listad...@frameusers.com
<mailto:listad...@frameusers.com>. Visit
http://www.frameusers.com/ for more resources and info.
--
Image removed by sender. <http://www.actifio.com/>
*John Sgammato, Documentation Architect*
*e*john.sgamm...@actifio.com <mailto:john.sgamm...@actifio.com>
*c* 508.927.2083 <tel:508.927.2083>
*t* @actifiodocs <http://twitter.com/actifiodocs>
333 Wyman Street, Waltham, MA 02451
Image removed by sender. <http://twitter.com/actifio> Image
removed by sender. <http://www.linkedin.com/company/399246> Image
removed by sender.
<https://plus.google.com/102870897962348937868/posts> Image
removed by sender. <http://www.youtube.com/user/actifio> Image
removed by sender. <http://www.actifio.com/>
/Radically simple copy data management /
/./
--
<http://www.actifio.com/> *John Sgammato,
Documentation Architect*
*e* john.sgamm...@actifio.com <mailto:john.sgamm...@actifio.com> *c*
508.927.2083
*t*@actifiodocs <http://twitter.com/actifiodocs>
333 Wyman Street, Waltham, MA 02451
<http://twitter.com/actifio> <http://www.linkedin.com/company/399246>
<https://plus.google.com/102870897962348937868/posts>
<http://www.youtube.com/user/actifio> <http://www.actifio.com/>
/Radically simple copy data management /
/.//
/
_______________________________________________
You are currently subscribed to framers as s...@leximation.com.
Send list messages to framers@lists.frameusers.com.
To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit
http://lists.frameusers.com/mailman/options/framers/sp10%40leximation.com
Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.
_______________________________________________
You are currently subscribed to framers as arch...@mail-archive.com.
Send list messages to framers@lists.frameusers.com.
To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com
Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.
