Why not use FrameMaker? - Create a table for the calendar with 7 columns and 6 rows. Set the row height for rows 1-4 to the total height divided by 5, and to half that height for rows 5 & 6 (since some months won't have anything in the 6th row). Straddle the columns in rows 5 & 6 that don't have a number in row 6. Using points instead of inches makes this easier (72 points per inch).
- Create a para format for the dates with autonumbering (<n+>), and assign that format to every cell that should include a date. Assign a different format to the cells that shouldn't include a date. - Create a para format for the month (as the table title, or in the paragraph that anchors the table), turn on autonumbering, but _leave it blank_. This will set the Date para format numbering to 0. Another option would be to set it to < =0> (note that there is a space before the equal sign) -- both will have the same result. - If needed, create a para format for text for events, which would follow the date paragraph. There isn't a simple way to get this text to appear at the bottom of the cell, but with a little bit of math you could set space above to work, or use blank paras. Since this isn't a technical document, you're probably less concerned about using overrides. You want to ensure that adding the text doesn't increase the height of the row. - Make sure the table format is set for Row First in the Numbering property (on the Basic tab of the Table Designer). This is the default. The pictures could be imported onto the page without being included in the text frame. That means that your page setup would include a very large top margin -- 8.5" plus the top margin for the bottom of the page (for the fold and staple). You might have to do some work to get the imposition correct, but each page will have a picture on top and a month on the bottom. It's not too hard to figure out if you make a little dummy booklet. A nice advantage of this method is that it is easy to shade certain dates for birthdays, etc. And it's nice that you don't have to type in any dates -- just assign the correct paragraph format and it's done automatically. Good luck! Deb Correia > -----Original Message----- > From: kgrace4715 at aol.com > Sent: Monday, July 31, 2006 12:45 PM > To: framers at lists.frameusers.com > Subject: Calendar > > > I realize this is off topic but I am sure that members of > this group may have run across calendar software. I recently > purchased a digital camera and I was wondering if there was > some software that would allow me to produce an oversized > professional calendar e.g., each page being 11x17. Any help > would be appreciated.
