Some of my colleagues are having problems printing from FrameMaker to
their local printer. First, some technical details:
Windows 2000 or XP (SP2)
Toshiba eStudio 2820c printer/copier
PostScript Driver: estudio 4520C series printer driver, version 220.127.116.11
The problem is this:
* When printing a page from Frame that has more than one anchored
frame containing a graphic (we've tested eps and tif), only the
first anchored frame and graphic prints. The following anchored
frames and graphics on that page do not print, although text
following the first a-frame+graphic does print.
* I can print a page containing 4 empty anchored frames, but as soon
as I insert the graphic into one frame, the following frames don't
* I can put the same graphics into one a-frame on a page and they
will all print.
* I can just put the same graphics onto a page without any a-frames,
and they will all print.
* I can print a page containing 4 a-frames with one tif graphic in
each frame successfully using the PCL driver.
I can print all my test files successfully to my local HP5200 PS
printer. Unfortunately my colleagues are in a different building and
don't have another printer handy to them.
Just wondering if anyone has come across a similar problem. The
work-around is to print to PDF first and send that to the printer, but
it does take longer.
Dave Reynolds Phone: (64) (3) 358 1029
Senior Technical Author Fax: (64) (3) 359 4632
Tait Electronics Ltd Email: dave.reynolds at tait.co.nz
PO Box 1645
This email, including any attachments, is only for the intended
addressee. It is subject to copyright, is confidential and may be
the subject of legal or other privilege, none of which is waived or
lost by reason of this transmission.
If the receiver is not the intended addressee, please accept our
apologies, notify us by return, delete all copies and perform no
other act on the email.
Unfortunately, we cannot warrant that the email has not been
altered or corrupted during transmission.