On 08/06/2012 8:01 PM, Robert Leif wrote: > I have been unable to produce a 2 column poster from a single column > page. I changed the size of the page to 24 by 44 inches. Subsequently, I > changed the column layout to two columns separated by 0.5 inch. I set > balance columns to yes and then no. The flow wanders from column to > column rather than first filling the left column and then the right > column. It also appears that often, I now cannot increase the width of > the page from 8.5 or 12 inches to 24 inches. This two column layout > worked with FrameMaker 9 and its precursors. Do I need to reinstall > FrameMaker 9? Since the last versions of FrameMaker were internet > installations, I do not have a copy of FrameMaker 9. I need to produce > this poster for a meeting that I will attend. > > Thank you. > > Robert C. Leif, Ph.D. >
Robert, Can I infer from your reference to FM 9 that you are currently working in FM 10? It's always helpful to the rest of us if you are as explicit as possible in describing your setup and the steps you have followed that resulted in a problem. It sounds like either the setting of balance columns to 'no' did not stick, or your pgf tags' pagination is set to 'across all columns.' It's also not clear what you mean by "cannot increase the width of the page", because you start out by saying that you did so. Myself, I would start out with File > New > Document > Custom and set the page up from that dialog box, rather than opening a blank letter size document and trying to change the defaults. I just followed that process and had no trouble (FM 10.0.2.419, Win 7/64). Balance columns worked as expected, and deselecting it also worked. Perhaps more step-wise detail of what you have done will help us diagnose your problem. Best, -- Stuart Rogers Technical Communicator Phoenix Geophysics Limited 3781 Victoria Park Avenue, Unit 3 Toronto, ON, Canada M1W 3K5 +1 (416) 491-7340 x 325 http://www.phoenix-geophysics.com
