HiHarro, Thank you very much for spotting my mistake. This was a copy/paste mistake.
Best regards Winfried > -----Original Message----- > From: Harro de Jong [mailto:Harro.deJong at triviewgroup.com] > Sent: Thursday, March 14, 2013 9:37 AM > To: Reng, Dr. Winfried; framers at lists.frameusers.com > Subject: RE: Straight-through numbering in FM book > > Dr. Winfried Reng wrote: > > > > If you want that your tables and figures use the first counter of the > > heading numbering, then they must be in the same series and the > > heading numbering must have three additional counters (if you do not > > need numbered labels in your figure title, then only two). These are > > reset to 0 with heading1: > > heading1: H:<n+>< =0>< =0>< =0>< =0>< =0>\t > > heading2: H:<n>.<n+>< =0>< >< >< >\t > > heading3: H:<n>.<n>.<n+>< >< >< >\t > > tabletitle: H:Table <n+>< =0>< =0><n+>< >< >: > > figuretitle: H:Fig. <n+>< =0>< =0>< ><n+>< =0>: > > This would increase the Heading1 number at every figure and table, and > reset Heading 2 and Heading 3, so your numbering would look like this: > > chapter 1 > figure 2.1 > chapter 3 > heading 3.1 > figure 4.1 > heading 5.1 > And the last number in the definitions isn't doing anything. > > If you want your figures and tables to have a number that includes the > chapter number, this is a correct setup without <$chapnum>: > > > heading1: H:<n+>< =0>< =0>< =0>< =0>\t > > heading2: H:<n>.<n+>< =0>< >< >\t > > heading3: H:<n>.<n>.<n+>< >< >\t > > tabletitle: H:Table <n>< >< >-<n+>< > > > figuretitle: H:Fig. <n>< >< >-< ><n+> > > > Harro de Jong > Triview ________________________________ This e-mail contains privileged and confidential information intended for the use of the addressees named above. If you are not the intended recipient of this e-mail, you are hereby notified that you must not disseminate, copy or take any action in respect of any information contained in it. If you have received this e-mail in error, please notify the sender immediately by e-mail and immediately destroy this e-mail and its attachments.
