Hi, Fred: I did look into that, but the bin folder is not there; this is what I'm seeing in terms of a hierarchy:
[cid:image002.jpg at 01CFA0E4.7F5E0710] Thanks, Bob From: Fred Ridder [mailto:[email protected]] Sent: Wednesday, July 16, 2014 10:48 AM To: Prestridge, RobertX H Subject: RE: Problems with Mif2Go conversion Have you looked in the C:\bin\pkzip25 directory? That's the directory where the "add" command was invoked. ________________________________ From: robertx.h.prestridge at intel.com<mailto:[email protected]> To: wreng at tycoint.com<mailto:wreng at tycoint.com> Subject: RE: Problems with Mif2Go conversion Date: Wed, 16 Jul 2014 16:41:14 +0000 CC: framers at lists.frameusers.com<mailto:framers at lists.frameusers.com> Dr. Reng: Thank you for writing; I hope that your Wednesday has started off well. I see in my log file that a .zip file is being created, but this .zip file is not appearing in my DITA conversion folder (i.e., the subfolder _ship), and this .zip file is not appearing in any local/temp files. Below appear my log file and the .ini file. Thanks again, especially if you can provide any insights! Bob *** Log file Tue Jul 15 15:24:57 2014 I1: Starting log for m2rbook, b114 and f009, project "AppendixE" I1: Opened file C:\Users\rhprestx\Desktop\files\E_EMTA_Intel-552 Design Considerations.fm I1: File ID is ah Tue Jul 15 15:25:01 2014 I1: Starting log for drmif, m210 I1: Automation processing completed by drmif. Tue Jul 15 15:25:02 2014 I1: Starting log for dwhtm, h293 I1: Gathering files... I1: del C:\Users\rhprestx\Desktop\DITA_conversion\_wrap /q I1: copy /Y "%omsyshome%\common\system\htmlidx\idxhtm.css" "C:\Users\rhprestx\Desktop\DITA_conversion\_wrap" I1: cd C:\Users\rhprestx\Desktop\DITA_conversion\_wrap I1: Archiving... I1: "C:\bin\pkzip25" -add E_EMTA_Intel-552 Design Considerations.zip *.* I1: Putting in shipping directory... I1: move /Y "E_EMTA_Intel-552 Design Considerations.zip" "C:\Users\rhprestx\Desktop\DITA_conversion\_ship" I1: Automation processing completed by dwhtm. *** .ini file ; _m2dita.ini - Starting Mif2Go configuration for DITA output [Templates] ; Where the rest of the configuration settings are: Configs=%omsyshome%\m2g\local\config\local_m2dita_config.ini [Setup] FileSuffix=xml UseFrameTOC=No UseFrameIX=No UseFrameGenFiles=No ConvertVariables=Yes PrjFileName=C:\Users\rhprestx\Desktop\files\E_EMTA_Intel-552 Design Considerations.prj IDFileName=C:\Users\rhprestx\Desktop\files\mif2go.ini PluginVersion=b114 ProjectName=AppendixE FrameBook= FrameChapter=C:\Users\rhprestx\Desktop\files\E_EMTA_Intel-552 Design Considerations.fm WriteEquations=No WriteAllGraphics=No UseExistingMIF=No UseExistingDCL=No [Automation] ; Whether and where to assemble and archive output: WrapAndShip=Yes ShipPath=C:\Users\rhprestx\Desktop\DITA_conversion\_ship ; Archive name and version for output: ;ArchiveName=YourProject ;ArchiveVer= ; Where to find graphics for this project: ;CopyGraphicsFrom=.\.. GraphCopyFiles=*.jpg *.gif ArchiveName=E_EMTA_Intel-552 Design Considerations [HTMLOptions] ; Default page title for output: ;Title=Your default DITA page title here ObjectIDs=Referenced FileSuffix=.dita NoFonts=Yes AlignAttributes=No AllowOverrides=No StartingSplit=No [CSS] UseCSS=No [DITAOptions] DITAVer=1 DefTopic=concept DefParaElem=p DefCharElem=ph [DITAParaTags] Body=p Heading*=title Numbered=li Numbered1=li Bulleted=li FigureTitle=title TableTitle=title CellBody=p CellHeading=p [DITAParaAttributes] [DITAParaTypographics] [DITACharTags] Emphasis=i [DITACharAttributes] [DITACharTypographics] [DITALevels] Title=1 Heading*=3 [DITAParents] Title=topic Heading*=section Numbered1=ol Numbered=ol Bulleted=ul FigureTitle=fig [DITAParentAttributes] [DITAFirst] Heading*=section Numbered1=ol [DITAAliases] [DITACloseBefore] [DITACloseAfter] [DITAOpenBefore] [DITAOpenAfter] [DITAElementSets] $top=body section step $text=body conbody taskbody refbody section example step refsyn entry $list=ol ul [DITATopics] [DITATables] [DITAMapLevels] [DITAMapUsage] [DITARelGroups] [DITARelBookGroups] [DITAContentModels] [Graphics] UseOriginalGraphicNames=No [End] *** From: Reng, Dr. Winfried [mailto:[email protected]] Sent: Tuesday, July 15, 2014 11:32 PM To: Prestridge, RobertX H Subject: RE: Problems with Mif2Go conversion Hi Bob, You also checked the content of any zip files which might have been created, didn't you? Best regards Winfried From: framers-bounces at lists.frameusers.com<mailto:framers-bounces at lists.frameusers.com> [mailto:[email protected]] On Behalf Of Prestridge, RobertX H Sent: Tuesday, July 15, 2014 5:46 PM To: Yves Barbion Cc: framers at lists.frameusers.com<mailto:framers at lists.frameusers.com> Subject: RE: Problems with Mif2Go conversion And I'm checking the Wrap and Ship button before attempting production. Thanks, Bob From: framers-bounces at lists.frameusers.com<mailto:framers-bounces at lists.frameusers.com> [mailto:[email protected]] On Behalf Of Prestridge, RobertX H Sent: Tuesday, July 15, 2014 8:32 AM To: Yves Barbion Cc: framers at lists.frameusers.com<mailto:framers at lists.frameusers.com> Subject: RE: Problems with Mif2Go conversion Hi, Yves: Here's what the log file says: Mon Jul 14 15:36:34 2014 I1: Starting log for dwhtm, h293 I1: Gathering files... I1: del C:\Users\rhprestx\Desktop\DITA_conversion\_wrap /q I1: copy /Y "%omsyshome%\common\system\htmlidx\idxhtm.css" "C:\Users\rhprestx\Desktop\DITA_conversion\_wrap" I1: cd C:\Users\rhprestx\Desktop\DITA_conversion\_wrap I1: Archiving... I1: "C:\bin\pkzip25" -add 01_Introduction_Intel-552 Design Considerations.zip *.* I1: Putting in shipping directory... I1: move /Y "01_Introduction_Intel-552 Design Considerations.zip" "..\..\_ship" I1: Automation processing completed by dwhtm. Thanks for any help or insight that you can provide. Bob From: Yves Barbion [mailto:[email protected]] Sent: Tuesday, July 15, 2014 8:06 AM To: Prestridge, RobertX H Cc: framers at lists.frameusers.com<mailto:framers at lists.frameusers.com> Subject: Re: Problems with Mif2Go conversion Hi Robert What does the _m2g_log.txt file say? Normally, you should get a .ditamap file and one or more .dita or .xml files. Cheers -- Yves Barbion www.scripto.nu<http://www.scripto.nu> ________________________________ This e-mail contains privileged and confidential information intended for the use of the addressees named above. If you are not the intended recipient of this e-mail, you are hereby notified that you must not disseminate, copy or take any action in respect of any information contained in it. If you have received this e-mail in error, please notify the sender immediately by e-mail and immediately destroy this e-mail and its attachments. _______________________________________________ You are currently subscribed to framers as DocuDoc at hotmail.com<mailto:DocuDoc at hotmail.com>. Send list messages to framers at lists.frameusers.com<mailto:framers at lists.frameusers.com>. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com<mailto:framers-unsubscribe at lists.frameusers.com> or visit http://lists.frameusers.com/mailman/options/framers/docudoc%40hotmail.com Send administrative questions to listadmin at frameusers.com<mailto:listadmin at frameusers.com>. Visit http://www.frameusers.com/ for more resources and info. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20140716/c37e7ecc/attachment.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: image002.jpg Type: image/jpeg Size: 21635 bytes Desc: image002.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20140716/c37e7ecc/attachment.jpg>
