I'm about to have my EIKI SSL-0 back from Dwight at the Boston Connection for many of the same issues. I had tinkered with fixing the issues on my own, but they persisted, after purchasing the projector from someone who had it in a closet for 30 years.
It was nice to invest in the tune-up, even if it meant a delay in processing some film/buying more film stock. http://cutfilm.com mattshaw.me 🌲📡🌲 Sent with ProtonMail Secure Email. ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On Thursday, March 4, 2021 9:53 PM, Scott Dorsey <[email protected]> wrote: > Larry is entirely correct about lubricating the cam gears BUT... if that is > a problem, likely you have a lot of other lubrication issues that are going > to appear soon. Get yourself a bottle of turbine oil and a tube of white > grease and go through the full lubrication procedure in the manual. Make > SURE to lube the intermittent properly because it will destroy itself if it > runs dry. > > The slot load mechanism has a lot of things that can get balky if they are > not kept clean and lubricated, and it can shred your film very badly if it > starts acting up. Go through the whole lubrication. > --scott > > ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- > > Frameworks mailing list > [email protected] > https://mail.film-gallery.org/mailman/listinfo/frameworks_film-gallery.org -- Frameworks mailing list [email protected] https://mail.film-gallery.org/mailman/listinfo/frameworks_film-gallery.org
