Hi Chris, Some Eikis are supposed to have a line level out if you use the sleeve and ring (or ring and tip?) of a three-conductor (TRS) jack but I've never had much luck with that. I run the output from the speaker jack of our NT-0s on a mono 1/4" to a cheap DI box (Behringer DI20) then out of that as a balanced XLR to the board. The DI can pad it down 20 or 40dB so the signal isn't so hot and also gives you two channels for fake stereo.
Todd Eacrett Victoria BC Canada On Mon, Nov 20, 2023, at 12:02 PM, Chris Freeman wrote: > We are trying to hook up an EIKI SNT-0 16mm projector to a sound system, but > the only output on the projector is an 8 ohm powered speaker out. So it's > got an amp in it and is meant to power a speaker. So presumably the signal > is way too hot to plug into a mixing board. > > Has anyone else ever used a similar projector with an existing sound system > in a room? What sort of hookups do you need to connect it? > > Thanks! > Chris Freeman > > > -- > Frameworks mailing list > [email protected] > https://mail.film-gallery.org/mailman/listinfo/frameworks_film-gallery.org > > > *Attachments:* > • IMG_9298.JPG > • IMG_9299.JPG
-- Frameworks mailing list [email protected] https://mail.film-gallery.org/mailman/listinfo/frameworks_film-gallery.org
