Get the manual, go through the procedure listed. It is not hard. You will need a light grease and what Kodak calls "light machine oil" which is more or less an ISO 32 turbine oil.
1. Don't ever, ever run a projector with the cam follower dry. There is usually a cotton pad near the top of the cam follower that is attached to the pull-down claw. If that gets dried out, you will destroy the cam with a few minutes of operating. Put a good turbine oil on there. Zoom-Spout Oil from Ace Hardware is a good choice. 2. The motor bearings on the Pageant also need regular lubrication with the turbine oil. 3. Don't ever, ever bring a can of WD-40 near anything you care about. It is not a lubricant. --scott _______________________________________________ FrameWorks mailing list [email protected] https://mailman-mail5.webfaction.com/listinfo/frameworks
