As I remember the Rex o fader is left hand thread. Try turning it the other way.

Sent from my iPhone
Sherman George
858-229-4368


On Sep 1, 2015, at 1:02 PM, Ugo Bo 
<ugobodi...@gmail.com<mailto:ugobodi...@gmail.com>> wrote:

Mmh
penetrating oil didn't work (I used Wd-40), I think I applied a considerable 
torque (don't ask me how much)... I wonder how much the service can charge for 
having the job done...
thanks anyway
Livio

2015-08-31 16:42 GMT+02:00 Ugo Bo 
<ugobodi...@gmail.com<mailto:ugobodi...@gmail.com>>:
Thanks Scott
I'm going to have a try tonight with some unlocking oil.

But the cog screw that's is stuck is a male one, which goes in the rewind 
spindle screw that's a female one, so heating the cog up should widen it making 
it stuck even more...

And I can't heat up the spindle screw which is unaccessible without dismantling 
the camera... (and both of these things scare me a bit...)

2015-08-31 16:14 GMT+02:00 Scott Dorsey 
<klu...@panix.com<mailto:klu...@panix.com>>:
Put a drop of kroil or some other penetrating oil on the cog.  Maybe
heat it up a little with a soldering iron.
--scott

_______________________________________________
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com<mailto:FrameWorks@jonasmekasfilms.com>
https://mailman-mail5.webfaction.com/listinfo/frameworks


_______________________________________________
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com<mailto:FrameWorks@jonasmekasfilms.com>
https://mailman-mail5.webfaction.com/listinfo/frameworks
_______________________________________________
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

Reply via email to