Re: [Frameworks] Problem with projector's lamp

[Ed Inman]

The first thing I would do is check for direct current voltage at the lamp terminals with a multi-tester. According to an online manual the proper lamp is a 250 watt 24-volt ELC. A 200-watt 24-volt ELJ may alternately be used with less output.  With the lamp switch ON you should be getting about 22 VDC in the low position and 24 VDC in the high position. If the current is present, the problem is with the lamps. If no current there is a bad connection or a problem with the power transformer.  Ed -----Original Message----- From: Esperanza Collado Sent: Jan 9, 2016 12:08 PM To: Experimental Film Discussion List Subject: [Frameworks] Problem with projector's lamp Dear Frameworkers,  Im about to present a projector's performance and one of the projector's lamps stopped working. I checked fuses, which are fine and i replaced the lamp three times but the light wont appear. Optical lamp works as well as everything else. Any idea what could it be? It is an Eiki SL-2.  Hopefully someone can help!  Thank you, Esperanza -- Esperanza Collado - - - - - - - - - - - - - -  www.esperanzacollado.org

_______________________________________________
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks