> From: hallucinat...@hotmail.com
> To: freebsd-acpi@freebsd.org
> Date: Thu, 13 May 2010 21:56:20 +0800
> Subject: Errors encountered when performing hibernate / suspend
> 
> 
> Hi!
> 
> 
> First, thank you very much for your help. I am very new to FreeBSD, so do 
> bear with me for a while. Anyway, the problem is as follows:
> 
> 
> Whenever I tried to hibernate, it will not be successful and I get the 
> following error at my ~/.xession-error file:
> 
> 
> ** Message: xfsm-shutdown-helper.c:268: Using HAL to shutdown/reboot the 
> computer.
> ** Message: xfsm-shutdown-helper.c:268: Using HAL to shutdown/reboot the 
> computer.
> 
> ** (xfce4-session:1124): WARNING **: xfsm-shutdown-helper.c:234: Failed to 
> contact HAL: No back-end for your operating system
> 
> 
> 
> When I tried to suspend, it will not be successful and I will get the error 
> message at my ~/.xession-error file:
> 
> 
> ** Message: xfsm-shutdown-helper.c:268: Using HAL to shutdown/reboot the 
> computer.
> ** Message: xfsm-shutdown-helper.c:268: Using HAL to shutdown/reboot the 
> computer.
> thunar-volman: No property info.capabilities on device with id 
> /org/freedesktop/Hal/devices/usb_device_45e_83_noserial.
> 
> 
> 
> I read the Handbook and I thought it may help by trying out the command 
> "acpiconf -s1". Of course it is not successful and the error message ar 
> ~/.xsession-error is:
> 
> 
> ** Message: xfsm-shutdown-helper.c:268: Using HAL to shutdown/reboot the 
> computer.
> ** Message: xfsm-shutdown-helper.c:268: Using HAL to shutdown/reboot the 
> computer.
> thunar-volman: No property info.capabilities on device with id 
> /org/freedesktop/Hal/devices/usb_device_45e_83_noserial.
> 
> 
> 
> 
> while the following is my "dmesg" output:
> 
> 
> Copyright (c) 1992-2009 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>       The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:48:17 UTC 2009
>     r...@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel Pentium III (996.77-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
>   
> Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
> real memory  = 537395200 (512 MB)
> avail memory = 510431232 (486 MB)
> ACPI APIC Table: <COMPAQ SOLANO  >
> ioapic0: Changing APIC ID to 8
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> acpi0: <COMPAQ CPQ0005> on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> acpi0: reservation of 0, a0000 (3) failed
> acpi0: reservation of 100000, 1ff00000 (3) failed
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> on hostb0
> pcib1: <PCI-PCI bridge> at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> vgapci0: <VGA-compatible display> mem 
> 0x41000000-0x41ffffff,0x44000000-0x45ffffff irq 18 at device 0.0 on pci1
> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> fxp0: <Intel 82801BA/CAM (ICH2/3) Pro/100 Ethernet> port 0x1000-0x103f mem 
> 0x40000000-0x40000fff irq 20 at device 8.0 on pci2
> miibus0: <MII bus> on fxp0
> inphy0: <i82562EM 10/100 media interface> PHY 1 on miibus0
> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> fxp0: Ethernet address: 00:02:a5:94:97:26
> fxp0: [ITHREAD]
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH2 UDMA100 controller> port 
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2460-0x246f at device 31.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata0: [ITHREAD]
> ata1: <ATA channel 1> on atapci0
> ata1: [ITHREAD]
> uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0x2440-0x245f irq 
> 23 at device 31.4 on pci0
> uhci0: [ITHREAD]
> uhci0: LegSup = 0x0030
> usbus0: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci0
> pcm0: <Intel ICH2 (82801BA)> port 0x2000-0x20ff,0x2400-0x243f irq 17 at 
> device 31.5 on pci0
> pcm0: [ITHREAD]
> pcm0: <Analog Devices AD1885 AC97 Codec>
> acpi_button0: <Power Button> on acpi0
> atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77d irq 7 drq 3 on acpi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/13 bytes threshold
> ppc0: [ITHREAD]
> ppbus0: <Parallel port bus> on ppc0
> ppbus0: IEEE1284 device found /NIBBLE
> ppbus0: Probing for PnP devices:
> ppbus0: <Canon S400SP/1.06> PRINTER BJL,BJRaster3,BSCC,TXT01,BJScan2
> plip0: <PLIP network interface> on ppbus0
> plip0: [ITHREAD]
> lpt0: <Printer> on ppbus0
> lpt0: [ITHREAD]
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> uart0: [FILTER]
> uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
> uart1: [FILTER]
> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
> fdc0: [FILTER]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> cpu0: <ACPI CPU> on acpi0
> acpi_throttle0: <ACPI CPU Throttling> on cpu0
> pmtimer0 on isa0
> orm0: <ISA Option ROM> at iomem 0xe0000-0xeffff pnpid ORM0000 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounter "TSC" frequency 996770364 Hz quality 800
> Timecounters tick every 1.000 msec
> usbus0: 12Mbps Full Speed USB v1.0
> ad0: 39205MB <Maxtor 6E040L0 NAR61HA0> at ata0-master UDMA100
> ugen0.1: <Intel> at usbus0
> uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> acd0: CDROM <LTN486S/YQS8> at ata1-master PIO4
> pcm0: measured ac97 link rate at 55945 Hz
> uhub0: 2 ports with 2 removable, self powered
> Root mount waiting for: usbus0
> ugen0.2: <Microsoft> at usbus0
> ums0: <Microsoft Basic Optical Mouse, class 0/0, rev 1.10/0.00, addr 2> on 
> usbus0
> ums0: 3 buttons and [XYZ] coordinates ID=0
> Trying to mount root from ufs:/dev/ad0s1a
> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
> acd0: FAILURE - unknown CMD (0x03) ILLEGAL REQUEST asc=0x20 ascq=0x00 
> acd0: FAILURE - READ_DISK_INFO ILLEGAL REQUEST asc=0x20 ascq=0x00 
> acd0: FAILURE - READ_DISK_INFO ILLEGAL REQUEST asc=0x20 ascq=0x00 
> acpi0: AcpiEnterSleepState failed - AE_BAD_ADDRESS
> wakeup from sleeping state (slept 00:00:03)
> ugen0.2: <Microsoft> at usbus0 (disconnected)
> ums0: at uhub0, port 2, addr 2 (disconnected)
> ugen0.2: <Microsoft> at usbus0
> ums0: <Microsoft Basic Optical Mouse, class 0/0, rev 1.10/0.00, addr 2> on 
> usbus0
> ums0: 3 buttons and [XYZ] coordinates ID=0
> 
> 
> 
> 
> 
> The output of "sysctl hw.acpi":
> 
> 
> hw.acpi.supported_sleep_state: S1 S3 S4 S5
> hw.acpi.power_button_state: S5
> hw.acpi.sleep_button_state: S1
> hw.acpi.lid_switch_state: NONE
> hw.acpi.standby_state: S1
> hw.acpi.suspend_state: S3
> hw.acpi.sleep_delay: 1
> hw.acpi.s4bios: 0
> hw.acpi.verbose: 0
> hw.acpi.disable_on_reboot: 0
> hw.acpi.handle_reboot: 0
> hw.acpi.reset_video: 0
> hw.acpi.cpu.cx_lowest: C1
> 
> 
> 
> 
> 
> I am using FreeBSD 8.0 and Xfce desktop environment (Thunar is the file 
> manager). For hardware, I am using Pentium III; Compaq Deskpro EN.
> 
> I am not sure if all these information are sufficient; do let me know if you 
> need more information. Once again, thank you very much for your help.
> 
> 
> 
> WY
> 
> 
> 
> 
> 
> 
> 
> 
> 
>                                         
> _________________________________________________________________
> Your E-mail and More On-the-Go. Get Windows Live Hotmail Free.
> https://signup.live.com/signup.aspx?id=60969







Hi! Erm... just wondering, is my debug info sufficient or is the problem not an 
ACPI one? Also, may I know what can I do to help in solving the problem? 


Thanks :)






                                          
_________________________________________________________________
Hotmail: Trusted email with powerful SPAM protection.
https://signup.live.com/signup.aspx?id=60969
_______________________________________________
freebsd-acpi@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-acpi
To unsubscribe, send any mail to "freebsd-acpi-unsubscr...@freebsd.org"

Reply via email to