Hi, my N930 reports C1 as lowest cpu state:
mp% sysctl -a|grep cx_supp dev.cpu.0.cx_supported: C1/0 dev.cpu.1.cx_supported: C1/0 dev.cpu.2.cx_supported: C1/0 dev.cpu.3.cx_supported: C1/0 I searched the net, but I can't tell if that's correct. The system runs rather loud with FreeBSD (fan running full speed, cpu temp around 59°C). I can't switch off the second graphics card, one of my last ideas of getting it any cooler would be c2/c3. I've followed every other tip from TuningPowerConsumption and need still around 3315 mA. Thanks for any help, Mathias boot -v output: http://pastebin.com/VWYifahu acpidump -dt: http://pastebin.com/V82SuzrW cpufreq scaling works fine: dev.cpu.0.%desc: ACPI CPU dev.cpu.0.%driver: cpu dev.cpu.0.%location: handle=\_PR_.C000 dev.cpu.0.%pnpinfo: _HID=none _UID=0 dev.cpu.0.%parent: acpi0 dev.cpu.0.freq: 800 dev.cpu.0.freq_levels: 2000/7632 1700/5945 1400/4582 1100/3422 800/2328 dev.cpu.0.temperature: 59,1C dev.cpu.0.cx_supported: C1/0 dev.cpu.0.cx_lowest: C1 dev.cpu.0.cx_usage: 100.00% last 2038us dev.cpu.1.%desc: ACPI CPU _______________________________________________ freebsd-acpi@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-acpi To unsubscribe, send any mail to "freebsd-acpi-unsubscr...@freebsd.org"