>On Sat, Jul 7, 2012 at 10:40 AM, Brandon Gooch ><jamesbrandongo...@gmail.com> wrote: >> On Wed, Jul 4, 2012 at 4:23 PM, mbsd <m...@isgroup.com.ua> wrote: >>> On Tue, 2012-07-03 at 14:11 +0800, 乔楚/HonestQiao wrote: >> [SNIP] >>>> >>>> In All the test, the screen is light and black, system is hangup, nothing >>>> can be done. >>>> The only thing can be done, is push power button, to force it shutdown. >>> >>> Which graphic card have you used? If you have had nvidia, it's normal, >>> I've had the same problem "the screen is light and black". >> >> Can both of you show the output of `devinfo -v` from your systems? >> >> I was able to solve my suspend/resume issue with my nvidia-equipped >> notebook by forcing the module load ordering of vgapm in >> sys/isa/vga_isa.c: >> >> Index: sys/isa/vga_isa.c >> =================================================================== >> --- sys/isa/vga_isa.c (revision 237779) >> +++ sys/isa/vga_isa.c (working copy) >> @@ -379,4 +379,4 @@ >> 0 >> }; >> >> -DRIVER_MODULE(vgapm, vgapci, vgapm_driver, vgapm_devclass, 0, 0); >> +DRIVER_MODULE(vgapm, vgapci, vgapm_driver, vgapm_devclass, 0, SI_ORDER_ANY); >> >> >> The system requires however that I load the nvidia module in >> /boot/loader.conf (as opposed to loading it after system is up and >> running). >> >> -Brandon > >Oops, the patch above should instead be: > >Index: sys/isa/vga_isa.c >=================================================================== >--- sys/isa/vga_isa.c (revision 238266) >+++ sys/isa/vga_isa.c (working copy) >@@ -379,4 +379,4 @@ > 0 > }; > >-DRIVER_MODULE(vgapm, vgapci, vgapm_driver, vgapm_devclass, 0, 0); >+DRIVER_MODULE_ORDERED(vgapm, vgapci, vgapm_driver, vgapm_devclass, >NULL, NULL, SI_ORDER_ANY); > >I made the edit for the diff on a clean tree, but I'm actually >building from another :) > >The above is correct. However, I'm still not sure this pertains to >your Intel video problem. > >-Brandon
Yesterday, I upgrade my freebsd to FreeBSD 9.1-PRERELEASE. This method did not work. And command 'shutdown -p now' can shutdown the system, but the Screen is black and light, and Battery LED is light. This command can't power off. Whethe in: sysctl -w hw.acpi.reset_video=0 sysctl -w hw.pci.do_power_suspend=1 sysctl -w hw.pci.do_power_resume=1 Or in: sysctl -w hw.acpi.reset_video=0 sysctl -w hw.pci.do_power_suspend=1 sysctl -w hw.pci.do_power_resume=1 I can execute acpiconf -s 3, but can't resume the screen which is black and light. Log for command 'acpiconf -s 3': Jul 20 16:06:53 x201i acpi: suspend at 20120720 16:06:53 Jul 20 16:06:56 x201i kernel: acpi_timer0: switching timecounter, TSC-low -> ACPI-safe Jul 20 16:06:56 x201i kernel: (ada0:ahcich0:0:0:0): spin-down Jul 20 16:07:00 x201i kernel: acpi_lid0: wake_prep enabled for \_SB_.LID_ (S3) Jul 20 16:07:00 x201i kernel: acpi_button0: wake_prep enabled for \_SB_.SLPB (S3) Jul 20 16:07:00 x201i kernel: uhub0: at usbus0, port 1, addr 1 (disconnected) Jul 20 16:07:00 x201i kernel: ugen0.2: <vendor 0x8087> at usbus0 (disconnected) Jul 20 16:07:00 x201i kernel: uhub2: at uhub0, port 1, addr 2 (disconnected) Jul 20 16:07:00 x201i kernel: pci0:0:28:0: Transition from D0 to D3 Jul 20 16:07:00 x201i kernel: pci0:0:28:3: Transition from D0 to D3 Jul 20 16:07:00 x201i kernel: wlan0: link state changed to DOWN Jul 20 16:07:00 x201i kernel: pci0:2:0:0: Transition from D0 to D3 Jul 20 16:07:00 x201i kernel: pci0:0:28:4: Transition from D0 to D3 Jul 20 16:07:00 x201i kernel: uhub1: at usbus1, port 1, addr 1 (disconnected) Jul 20 16:07:00 x201i kernel: ugen1.2: <vendor 0x8087> at usbus1 (disconnected) Jul 20 16:07:00 x201i kernel: uhub3: at uhub1, port 1, addr 2 (disconnected) Jul 20 16:07:00 x201i kernel: vga0: saving 4804 bytes of video state Jul 20 16:07:00 x201i kernel: vga0: saving color palette Jul 20 16:07:00 x201i kernel: pci0: failed to set ACPI power state D2 on \_SB_.PCI0.EXP1: AE_BAD_PARAMETER Jul 20 16:07:00 x201i kernel: pci0: failed to set ACPI power state D2 on \_SB_.PCI0.EXP4: AE_BAD_PARAMETER Jul 20 16:07:00 x201i kernel: pci0: failed to set ACPI power state D2 on \_SB_.PCI0.EXP5: AE_BAD_PARAMETER Jul 20 16:07:00 x201i kernel: acpi_lid0: wake_prep enabled for \_SB_.LID_ (S3) Jul 20 16:07:00 x201i kernel: acpi_button0: wake_prep enabled for \_SB_.SLPB (S3) Jul 20 16:07:00 x201i kernel: pci255: set ACPI power state D0 on \_SB_.UNCR.SAD_ Jul 20 16:07:00 x201i kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.VID_ Jul 20 16:07:00 x201i kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.IGBE Jul 20 16:07:00 x201i kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.EHC2 Jul 20 16:07:00 x201i kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.HDEF Jul 20 16:07:00 x201i kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.EXP1 Jul 20 16:07:00 x201i kernel: pci0:0:28:0: Transition from D3 to D0 Jul 20 16:07:00 x201i kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.EXP4 Jul 20 16:07:00 x201i kernel: pci0:0:28:3: Transition from D3 to D0 Jul 20 16:07:00 x201i kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.EXP5 Jul 20 16:07:00 x201i kernel: pci0:0:28:4: Transition from D3 to D0 Jul 20 16:07:00 x201i kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.EHC1 Jul 20 16:07:00 x201i kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.PCI1 Jul 20 16:07:00 x201i kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.LPC_ Jul 20 16:07:00 x201i kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.SAT1 Jul 20 16:07:00 x201i kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.EXP1 Jul 20 16:07:00 x201i kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.EXP4 Jul 20 16:07:00 x201i kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.EXP5 Jul 20 16:07:00 x201i kernel: pci0:2:0:0: Transition from D3 to D0 Jul 20 16:07:00 x201i kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.PCI1 Jul 20 16:07:00 x201i kernel: vga0: calling BIOS POST Jul 20 16:07:00 x201i kernel: ahcich0: AHCI reset... Jul 20 16:07:00 x201i kernel: ahcich0: SATA connect time=100us status=00000123 Jul 20 16:07:00 x201i kernel: ahcich0: AHCI reset: device found Jul 20 16:07:00 x201i kernel: ahcich1: AHCI reset... Jul 20 16:07:00 x201i kernel: ahcich1: SATA connect timeout time=10000us status=00000000 Jul 20 16:07:00 x201i kernel: ahcich1: AHCI reset: device not found Jul 20 16:07:00 x201i kernel: ahcich4: AHCI reset... Jul 20 16:07:00 x201i kernel: ahcich4: SATA connect timeout time=10000us status=00000000 Jul 20 16:07:00 x201i kernel: ahcich4: AHCI reset: device not found Jul 20 16:07:00 x201i kernel: ahcich5: AHCI reset... Jul 20 16:07:00 x201i kernel: ahcich5: SATA connect timeout time=10000us status=00000000 Jul 20 16:07:00 x201i kernel: ahcich5: AHCI reset: device not found Jul 20 16:07:00 x201i kernel: atkbd: the current kbd controller command byte 0047 Jul 20 16:07:00 x201i kernel: atkbd: keyboard ID 0x54ab (2) Jul 20 16:07:00 x201i kernel: kbdc: RESET_KBD return code:00fa Jul 20 16:07:00 x201i kernel: kbdc: RESET_KBD status:00aa Jul 20 16:07:00 x201i kernel: kbdc: TEST_AUX_PORT status:0000 Jul 20 16:07:00 x201i kernel: kbdc: RESET_AUX return code:00fa Jul 20 16:07:00 x201i kernel: kbdc: RESET_AUX status:00aa Jul 20 16:07:00 x201i kernel: kbdc: RESET_AUX ID:0000 Jul 20 16:07:00 x201i kernel: battery0: battery initialization start Jul 20 16:07:00 x201i kernel: ahcich0: AHCI reset: device ready after 100ms Jul 20 16:07:00 x201i kernel: battery0: battery initialization done, tried 1 times Jul 20 16:07:00 x201i kernel: (ada0:ahcich0:0:0:0): resume Jul 20 16:07:00 x201i kernel: acpi_timer0: restoring timecounter, ACPI-safe -> TSC-low Jul 20 16:07:00 x201i kernel: uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 Jul 20 16:07:00 x201i kernel: uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 Jul 20 16:07:00 x201i kernel: wlan0: link state changed to UP Jul 20 16:07:00 x201i kernel: uhub0: 3 ports with 3 removable, self powered Jul 20 16:07:00 x201i kernel: uhub1: 3 ports with 3 removable, self powered Jul 20 16:06:57 x201i wpa_supplicant[525]: CTRL-EVENT-DISCONNECTED bssid=c0:c5:20:1b:59:aa reason=0 Jul 20 16:06:57 x201i wpa_supplicant[525]: Failed to initiate AP scan. Jul 20 16:06:59 x201i acpi: resumed at 20120720 16:06:59 Jul 20 16:06:59 x201i wpa_supplicant[525]: Trying to associate with c0:c5:20:1b:69:8a (SSID='LITB-AP' freq=2417 MHz) Jul 20 16:07:00 x201i wpa_supplicant[525]: Associated with c0:c5:20:1b:69:8a Jul 20 16:07:00 x201i wpa_supplicant[525]: WPA: Key negotiation completed with c0:c5:20:1b:69:8a [PTK=CCMP GTK=CCMP] Jul 20 16:07:00 x201i wpa_supplicant[525]: CTRL-EVENT-CONNECTED - Connection to c0:c5:20:1b:69:8a completed (reauth) [id=0 id_str=] Jul 20 16:07:00 x201i dhclient: New IP Address (wlan0): 192.168.61.184 Jul 20 16:07:00 x201i dhclient: New Subnet Mask (wlan0): 255.255.255.0 Jul 20 16:07:00 x201i dhclient: New Broadcast Address (wlan0): 192.168.61.255 Jul 20 16:07:00 x201i dhclient: New Routers (wlan0): 192.168.61.1 Jul 20 16:07:01 x201i kernel: ugen1.2: <vendor 0x8087> at usbus1 Jul 20 16:07:01 x201i kernel: uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1 Jul 20 16:07:01 x201i kernel: ugen0.2: <vendor 0x8087> at usbus0 Jul 20 16:07:01 x201i kernel: uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0 Jul 20 16:07:02 x201i kernel: uhub3: 6 ports with 6 removable, self powered Jul 20 16:07:02 x201i kernel: uhub2: 8 ports with 8 removable, self powered
_______________________________________________ freebsd-acpi@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-acpi To unsubscribe, send any mail to "freebsd-acpi-unsubscr...@freebsd.org"
