Hi

I'm having problem with acpi battery status is not updated it is freezed on
96% when on AC power, I'm running FreeBSD 10-RELEASE on HP Workstation
8570w.
I tested ASL with iasl and it has syntax error. I coultn't boot with acpi
turned off so Im sending you dmesg output only with acpi enabled.

here is ASL file link:
https://www.sendspace.com/file/do5xn7

Thank you
Table 'FACP' at 0xbeffc000
Table 'HPET' at 0xbeffb000
Table 'APIC' at 0xbeffa000
APIC: Found table at 0xbeffa000
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 2 ACPI ID 2: enabled
SMP: Added CPU 2 (AP)
MADT: Found CPU APIC ID 3 ACPI ID 3: enabled
SMP: Added CPU 3 (AP)
MADT: Found CPU APIC ID 4 ACPI ID 4: enabled
SMP: Added CPU 4 (AP)
MADT: Found CPU APIC ID 5 ACPI ID 5: enabled
SMP: Added CPU 5 (AP)
MADT: Found CPU APIC ID 6 ACPI ID 6: enabled
SMP: Added CPU 6 (AP)
MADT: Found CPU APIC ID 7 ACPI ID 7: enabled
SMP: Added CPU 7 (AP)
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-RELEASE-p7 #0: Tue Jul  8 06:37:44 UTC 2014
    r...@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff817f2000.
Calibrating TSC clock ... TSC clock: 2394611688 Hz
CPU: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (2394.61-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x306a9  Family = 0x6  Model = 0x3a  Stepping = 
9
  
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  
Features2=0x7fbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Standard Extended Features=0x281<GSFSBASE,SMEP,ENHMOVSB>
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
Physical memory chunk(s):
0x0000000000010000 - 0x0000000000099fff, 565248 bytes (138 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x000000000181f000 - 0x00000000bd8fefff, 3155034112 bytes (770272 pages)
0x00000000bec7f000 - 0x00000000bef71fff, 3092480 bytes (755 pages)
0x00000000befff000 - 0x00000000beffffff, 4096 bytes (1 pages)
0x0000000100000000 - 0x000000022f5e8fff, 5089693696 bytes (1242601 pages)
avail memory = 8195903488 (7816 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HPQOEM 176B    >
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
INTR: Adding local APIC 4 as a target
INTR: Adding local APIC 5 as a target
INTR: Adding local APIC 6 as a target
INTR: Adding local APIC 7 as a target
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 3
APIC: CPU 4 has ACPI ID 4
APIC: CPU 5 has ACPI ID 5
APIC: CPU 6 has ACPI ID 6
APIC: CPU 7 has ACPI ID 7
lapic0: CMCI unmasked
x86bios:  IVT 0x000000-0x0004ff at 0xfffff80000000000
x86bios: SSEG 0x098000-0x098fff at 0xfffffe01ebf9f000
x86bios: EBDA 0x09d000-0x09ffff at 0xfffff8000009d000
x86bios:  ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
XEN: CPU 0 has VCPU ID 0
XEN: CPU 1 has VCPU ID 1
XEN: CPU 2 has VCPU ID 2
XEN: CPU 3 has VCPU ID 3
XEN: CPU 4 has VCPU ID 4
XEN: CPU 5 has VCPU ID 5
XEN: CPU 6 has VCPU ID 6
XEN: CPU 7 has VCPU ID 7
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ULE: setup cpu 4
ULE: setup cpu 5
ULE: setup cpu 6
ULE: setup cpu 7
ACPI: RSDP 0xf2f10 00024 (v02 HPQOEM)
ACPI: XSDT 0xbeffe120 00094 (v01 HPQOEM SLIC-MPC 0000000F      01000013)
ACPI: FACP 0xbeffc000 0010C (v05 HPQOEM 176B     0000000F HP   00000001)
ACPI: DSDT 0xbefd6000 20720 (v02 HPQOEM 176B     00000001 INTL 20110112)
ACPI: FACS 0xbec34000 00040
ACPI: HPET 0xbeffb000 00038 (v01 HPQOEM 176B     00000001 HP   00000001)
ACPI: APIC 0xbeffa000 000BC (v01 HPQOEM 176B     00000001 HP   00000001)
ACPI: MCFG 0xbeff9000 0003C (v01 HPQOEM 176B     00000001 HP   00000001)
ACPI: TCPA 0xbeff7000 00032 (v02 HPQOEM 176B     00000000 HP   00000001)
ACPI: SSDT 0xbefd3000 002CA (v01 HPQOEM SataAhci 00001000 INTL 20110112)
ACPI: SSDT 0xbefd2000 0048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
ACPI: SLIC 0xbefd1000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
ACPI: FPDT 0xbefcf000 00044 (v01 HPQOEM 176B     00000001 HP   00000001)
ACPI: BGRT 0xbefce000 00038 (v00 HPQOEM 176B     00000001 HP   00000001)
ACPI: SSDT 0xbefcd000 00E42 (v01 HPQOEM   ATIGFX 00000001 INTL 20110112)
ACPI: SSDT 0xbefca000 00932 (v01  PmRef  Cpu0Ist 00003000 INTL 20110112)
ACPI: SSDT 0xbefc9000 00AAD (v01  PmRef    CpuPm 00003000 INTL 20110112)
ACPI: ASF! 0xbeff8000 000A5 (v32 HPQOEM 176B     00000001 HP   00000001)
MADT: Found IO APIC ID 0, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
lapic2: Routing NMI -> LINT1
lapic2: LINT1 trigger: edge
lapic2: LINT1 polarity: high
lapic3: Routing NMI -> LINT1
lapic3: LINT1 trigger: edge
lapic3: LINT1 polarity: high
lapic4: Routing NMI -> LINT1
lapic4: LINT1 trigger: edge
lapic4: LINT1 polarity: high
lapic5: Routing NMI -> LINT1
lapic5: LINT1 trigger: edge
lapic5: LINT1 polarity: high
lapic6: Routing NMI -> LINT1
lapic6: LINT1 trigger: edge
lapic6: LINT1 polarity: high
lapic7: Routing NMI -> LINT1
lapic7: LINT1 trigger: edge
lapic7: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
   cmci: 0x000000f2
wlan: <802.11 Link Layer>
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 
feeder_rate_max=2016000 feeder_rate_round=25
Hardware, VIA Nehemiah Padlock RNG: VIA Padlock RNG not present
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
null: <null device, zero device>
nfslock: pseudo-device
Falling back to <Software, Yarrow> random adaptor
random: <Software, Yarrow> initialized
VESA: INT 0x10 vector 0xc000:0x039e
VESA: information block
0000   56 45 53 41 00 03 44 02 00 c0 01 00 00 00 44 00
0010   00 99 00 01 18 0f 59 01 00 c0 e4 00 00 c0 e0 56
0020   00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0030   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0040   00 00 00 00 00 01 01 01 03 01 05 01 07 01 10 01
0050   11 01 13 01 14 01 16 01 17 01 19 01 1a 01 0d 01
0060   0e 01 20 01 93 01 95 01 96 01 b3 01 b5 01 b6 01
0070   c3 01 c5 01 c6 01 33 01 35 01 36 01 53 01 55 01
0080   56 01 63 01 65 01 66 01 21 01 22 01 23 01 24 01
0090   43 01 45 01 46 01 73 01 75 01 76 01 83 01 85 01
00a0   86 01 d3 01 d5 01 d6 01 e3 01 e5 01 e6 01 d1 01
00b0   d2 01 d4 01 ff ff 00 00 00 00 00 00 00 00 00 00
00c0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00d0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00e0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00f0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0100   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0110   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0120   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0130   00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00
0140   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0150   00 00 00 00 80 81 01 00 00 00 00 00 00 00 00 00
0160   00 00 00 00 a8 06 00 00 00 00 00 00 08 00 00 00
0170   00 00 00 00 cc 5b 09 54 00 00 00 00 e1 ef 02 54
0180   00 00 00 00 e1 ef 02 54 00 00 00 00 e1 ef 02 54
0190   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01a0   00 00 00 00 20 e0 c6 7a 00 00 00 00 00 00 00 00
01b0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01c0   00 00 00 00 46 6f 38 00 00 00 00 00 00 00 00 00
01d0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01e0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01f0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 56 mode(s) found
VESA: v3.0, 16384k memory, flags:0x1, mode table:0xfffffe01ebfff044 (99000044)
VESA: AMD ATOMBIOS
VESA: (C) 1988-2010, Advanced Micro Devices, Inc. FGL CHELSEA 01.00
io: <I/O>
VMBUS: load
hptnr: R750/DC7280 controller driver v1.0
hpt27xx: RocketRAID 27xx controller driver v1.1
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
acpi0: <HPQOEM SLIC-MPC> on motherboard
ACPI: All ACPI Tables successfully acquired
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: Power Button (fixed)
cpu0: Processor \134_PR_.CPU0 (ACPI ID 0) -> APIC ID 0
cpu0: <ACPI CPU> on acpi0
ACPI: SSDT 0xbec32018 00861 (v01  PmRef  Cpu0Cst 00003001 INTL 20110112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0 00861 (v01  PmRef  Cpu0Cst 00003001 INTL 20110112)
cpu1: Processor \134_PR_.CPU1 (ACPI ID 1) -> APIC ID 1
cpu1: <ACPI CPU> on acpi0
ACPI: SSDT 0xbec33a98 00303 (v01  PmRef    ApIst 00003000 INTL 20110112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0 00303 (v01  PmRef    ApIst 00003000 INTL 20110112)
ACPI: SSDT 0xbec31d98 00119 (v01  PmRef    ApCst 00003000 INTL 20110112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0 00119 (v01  PmRef    ApCst 00003000 INTL 20110112)
cpu2: Processor \134_PR_.CPU2 (ACPI ID 2) -> APIC ID 2
cpu2: <ACPI CPU> on acpi0
cpu3: Processor \134_PR_.CPU3 (ACPI ID 3) -> APIC ID 3
cpu3: <ACPI CPU> on acpi0
cpu4: Processor \134_PR_.CPU4 (ACPI ID 4) -> APIC ID 4
cpu4: <ACPI CPU> on acpi0
cpu5: Processor \134_PR_.CPU5 (ACPI ID 5) -> APIC ID 5
cpu5: <ACPI CPU> on acpi0
cpu6: Processor \134_PR_.CPU6 (ACPI ID 6) -> APIC ID 6
cpu6: <ACPI CPU> on acpi0
cpu7: Processor \134_PR_.CPU7 (ACPI ID 7) -> APIC ID 7
cpu7: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 8 timers, legacy route
hpet0:  t0: irqs 0x00f00000 (0), MSI, 64bit, periodic
hpet0:  t1: irqs 0x00f00000 (0), MSI
hpet0:  t2: irqs 0x00f00800 (0), MSI
hpet0:  t3: irqs 0x00f01000 (0), MSI
hpet0:  t4: irqs 0x00000000 (0), MSI
hpet0:  t5: irqs 0x00000000 (0), MSI
hpet0:  t6: irqs 0x00000000 (0), MSI
hpet0:  t7: irqs 0x00000000 (0), MSI
Timecounter "HPET" frequency 14318180 Hz quality 950
msi: routing MSI-X IRQ 256 to local APIC 0 vector 49
msi: routing MSI-X IRQ 257 to local APIC 0 vector 50
msi: routing MSI-X IRQ 258 to local APIC 0 vector 51
msi: routing MSI-X IRQ 259 to local APIC 0 vector 52
msi: routing MSI-X IRQ 260 to local APIC 0 vector 53
msi: routing MSI-X IRQ 261 to local APIC 0 vector 54
msi: routing MSI-X IRQ 262 to local APIC 0 vector 55
msi: routing MSI-X IRQ 263 to local APIC 0 vector 56
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 
0.500000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 57
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 58
Event timer "i8254" frequency 1193182 Hz quality 100
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 6 10 11 12 14 15
  Validation          0   10   N     0  3 4 5 6 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  3 4 5 6 10 11 12 14 15
  Validation          0    5   N     0  3 4 5 6 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 6 10 11 12 14 15
  Validation          0   10   N     0  3 4 5 6 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 6 10 11 12 14 15
  Validation          0   10   N     0  3 4 5 6 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 10 11 12 14 15
  Validation          0   11   N     0  3 4 5 6 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 6 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 6 10 11 12 14 15
  Validation          0   10   N     0  3 4 5 6 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 6 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: decoding 4 range 0-0xcf7
pcib0: decoding 4 range 0xd00-0xffff
pcib0: decoding 3 range 0xa0000-0xbffff
pcib0: decoding 3 range 0xc0000000-0xdfffffff
pcib0: decoding 3 range 0xf0000000-0xfedfffff
pcib0: decoding 3 range 0xfee01000-0xffffffff
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x0154, revid=0x09
        domain=0, bus=0, slot=0, func=0
        class=06-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x0151, revid=0x09
        domain=0, bus=0, slot=1, func=0
        class=06-04-00, hdrtype=0x01, mfdev=1
        cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 3  supports D0 D3  current D0
        MSI supports 1 message
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x1e31, revid=0x04
        domain=0, bus=0, slot=20, func=0
        class=0c-03-30, hdrtype=0x00, mfdev=0
        cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D3  current D0
        MSI supports 8 messages, 64 bit
        map[10]: type Memory, range 64, base 0xd4420000, size 16, memory 
disabled
pcib0: allocated type 3 (0xd4420000-0xd442ffff) for rid 10 of pci0:0:20:0
pcib0: no PRT entry for 0.20.INTA
found-> vendor=0x8086, dev=0x1e3a, revid=0x04
        domain=0, bus=0, slot=22, func=0
        class=07-80-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 3  supports D0 D3  current D0
        MSI supports 1 message, 64 bit
        map[10]: type Memory, range 64, base 0xd4435000, size  4, enabled
pcib0: allocated type 3 (0xd4435000-0xd443500f) for rid 10 of pci0:0:22:0
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x1502, revid=0x04
        domain=0, bus=0, slot=25, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=5
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message, 64 bit
        map[10]: type Memory, range 32, base 0xd4400000, size 17, enabled
pcib0: allocated type 3 (0xd4400000-0xd441ffff) for rid 10 of pci0:0:25:0
        map[14]: type Memory, range 32, base 0xd443b000, size 12, enabled
pcib0: allocated type 3 (0xd443b000-0xd443bfff) for rid 14 of pci0:0:25:0
        map[18]: type I/O Port, range 32, base 0x5040, size  5, enabled
pcib0: allocated type 4 (0x5040-0x505f) for rid 18 of pci0:0:25:0
pcib0: matched entry for 0.25.INTA
pcib0: slot 25 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x1e2d, revid=0x04
        domain=0, bus=0, slot=26, func=0
        class=0c-03-20, hdrtype=0x00, mfdev=0
        cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D3  current D0
        map[10]: type Memory, range 32, base 0xd443a000, size 10, enabled
pcib0: allocated type 3 (0xd443a000-0xd443a3ff) for rid 10 of pci0:0:26:0
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x1e20, revid=0x04
        domain=0, bus=0, slot=27, func=0
        class=04-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message, 64 bit
        map[10]: type Memory, range 64, base 0xd4430000, size 14, enabled
pcib0: allocated type 3 (0xd4430000-0xd4433fff) for rid 10 of pci0:0:27:0
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found-> vendor=0x8086, dev=0x1e10, revid=0xc4
        domain=0, bus=0, slot=28, func=0
        class=06-04-00, hdrtype=0x01, mfdev=1
        cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=5
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x1e12, revid=0xc4
        domain=0, bus=0, slot=28, func=1
        class=06-04-00, hdrtype=0x01, mfdev=1
        cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=10
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 16
found-> vendor=0x8086, dev=0x1e14, revid=0xc4
        domain=0, bus=0, slot=28, func=2
        class=06-04-00, hdrtype=0x01, mfdev=1
        cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=c, irq=10
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message
pcib0: matched entry for 0.28.INTC
pcib0: slot 28 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x1e16, revid=0xc4
        domain=0, bus=0, slot=28, func=3
        class=06-04-00, hdrtype=0x01, mfdev=1
        cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=d, irq=10
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message
pcib0: matched entry for 0.28.INTD
pcib0: slot 28 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x1e26, revid=0x04
        domain=0, bus=0, slot=29, func=0
        class=0c-03-20, hdrtype=0x00, mfdev=0
        cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D3  current D0
        map[10]: type Memory, range 32, base 0xd4439000, size 10, enabled
pcib0: allocated type 3 (0xd4439000-0xd44393ff) for rid 10 of pci0:0:29:0
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x1e55, revid=0x04
        domain=0, bus=0, slot=31, func=0
        class=06-01-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1e03, revid=0x04
        domain=0, bus=0, slot=31, func=2
        class=01-06-01, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=10
        powerspec 3  supports D0 D3  current D0
        MSI supports 1 message
        map[10]: type I/O Port, range 32, base 0x5068, size  3, enabled
pcib0: allocated type 4 (0x5068-0x506f) for rid 10 of pci0:0:31:2
        map[14]: type I/O Port, range 32, base 0x5074, size  2, enabled
pcib0: allocated type 4 (0x5074-0x5077) for rid 14 of pci0:0:31:2
        map[18]: type I/O Port, range 32, base 0x5060, size  3, enabled
pcib0: allocated type 4 (0x5060-0x5067) for rid 18 of pci0:0:31:2
        map[1c]: type I/O Port, range 32, base 0x5070, size  2, enabled
pcib0: allocated type 4 (0x5070-0x5073) for rid 1c of pci0:0:31:2
        map[20]: type I/O Port, range 32, base 0x5020, size  5, enabled
pcib0: allocated type 4 (0x5020-0x503f) for rid 20 of pci0:0:31:2
        map[24]: type Memory, range 32, base 0xd4438000, size 11, enabled
pcib0: allocated type 3 (0xd4438000-0xd44387ff) for rid 24 of pci0:0:31:2
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x1e22, revid=0x04
        domain=0, bus=0, slot=31, func=3
        class=0c-05-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=c, irq=10
        map[10]: type Memory, range 64, base 0xd4434000, size  8, enabled
pcib0: allocated type 3 (0xd4434000-0xd44340ff) for rid 10 of pci0:0:31:3
        map[20]: type I/O Port, range 32, base 0xef80, size  5, enabled
pcib0: allocated type 4 (0xef80-0xef9f) for rid 20 of pci0:0:31:3
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 18
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib0: allocated type 4 (0x4000-0x4fff) for rid 1c of pcib1
pcib0: allocated type 3 (0xd4300000-0xd43fffff) for rid 20 of pcib1
pcib0: allocated type 3 (0xc0000000-0xcfffffff) for rid 24 of pcib1
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x4000-0x4fff
pcib1:   memory decode     0xd4300000-0xd43fffff
pcib1:   prefetched decode 0xc0000000-0xcfffffff
pcib1:   special decode    VGA
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x1002, dev=0x682d, revid=0x00
        domain=0, bus=1, slot=0, func=0
        class=03-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 3  supports D0 D1 D2 D3  current D0
        MSI supports 1 message, 64 bit
        map[10]: type Prefetchable Memory, range 64, base 0xc0000000, size 28, 
enabled
pcib1: allocated prefetch range (0xc0000000-0xcfffffff) for rid 10 of pci0:1:0:0
        map[18]: type Memory, range 64, base 0xd4300000, size 18, enabled
pcib1: allocated memory range (0xd4300000-0xd433ffff) for rid 18 of pci0:1:0:0
        map[20]: type I/O Port, range 32, base 0x4000, size  8, enabled
pcib1: allocated I/O port range (0x4000-0x40ff) for rid 20 of pci0:1:0:0
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0xaab0, revid=0x00
        domain=0, bus=1, slot=0, func=1
        class=04-03-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=10
        powerspec 3  supports D0 D1 D2 D3  current D0
        MSI supports 1 message, 64 bit
        map[10]: type Memory, range 64, base 0xd4340000, size 14, enabled
pcib1: allocated memory range (0xd4340000-0xd4343fff) for rid 10 of pci0:1:0:1
pcib1: matched entry for 1.0.INTB
pcib1: slot 0 INTB hardwired to IRQ 17
vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 
0xc0000000-0xcfffffff,0xd4300000-0xd433ffff irq 16 at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <ATI (0xaab0) HDA Controller> mem 0xd4340000-0xd4343fff irq 17 at device 
0.1 on pci1
hdac0: PCI card vendor: 0x103c, device: 0x176b
hdac0: HDA Driver Revision: 20120126_0002
hdac0: Config options: on=0x00000000 off=0x00000000
hdac0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 264 to local APIC 0 vector 59
hdac0: using IRQ 264 for MSI
hdac0: hdac_get_capabilities: Invalid corb size (0)
device_attach: hdac0 attach returned 6
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xd4420000-0xd442ffff irq 
10 at device 20.0 on pci0
xhci0: attempting to allocate 1 MSI vectors (8 supported)
msi: routing MSI IRQ 264 to local APIC 0 vector 59
xhci0: using IRQ 264 for MSI
xhci0: MSI enabled
xhci0: 32 byte context size.
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
xhci0: usbpf: Attached
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0x5040-0x505f mem 
0xd4400000-0xd441ffff,0xd443b000-0xd443bfff irq 17 at device 25.0 on pci0
em0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 265 to local APIC 0 vector 60
em0: using IRQ 265 for MSI
em0: Using an MSI interrupt
em0: bpf attached
em0: Ethernet address: fc:15:b4:06:78:e5
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xd443a000-0xd443a3ff irq 
16 at device 26.0 on pci0
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 61
usbus1: EHCI version 1.0
usbus1 on ehci0
ehci0: usbpf: Attached
hdac0: <Intel Panther Point HDA Controller> mem 0xd4430000-0xd4433fff irq 22 at 
device 27.0 on pci0
hdac0: PCI card vendor: 0x103c, device: 0x176b
hdac0: HDA Driver Revision: 20120126_0002
hdac0: Config options: on=0x00000000 off=0x00000000
hdac0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 266 to local APIC 0 vector 62
hdac0: using IRQ 266 for MSI
hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib0: allocated type 3 (0xd4200000-0xd42fffff) for rid 20 of pcib2
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   memory decode     0xd4200000-0xd42fffff
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pcib0: allocated type 4 (0x2000-0x3fff) for rid 1c of pcib3
pcib0: allocated type 3 (0xd0000000-0xd3ffffff) for rid 20 of pcib3
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   35
pcib3:   I/O decode        0x2000-0x3fff
pcib3:   memory decode     0xd0000000-0xd3ffffff
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib0: allocated type 3 (0xd4100000-0xd41fffff) for rid 20 of pcib4
pcib4:   domain            0
pcib4:   secondary bus     36
pcib4:   subordinate bus   36
pcib4:   memory decode     0xd4100000-0xd41fffff
pci36: <ACPI PCI bus> on pcib4
pci36: domain=0, physical bus=36
found-> vendor=0x197b, dev=0x2380, revid=0x30
        domain=0, bus=36, slot=0, func=0
        class=0c-00-10, hdrtype=0x00, mfdev=1
        cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 3  supports D0 D3  current D0
        MSI supports 1 message
        map[10]: type Memory, range 32, base 0xd4100000, size 11, enabled
pcib4: allocated memory range (0xd4100000-0xd41007ff) for rid 10 of pci0:36:0:0
        map[14]: type Memory, range 32, base 0xd4105000, size  8, enabled
pcib4: allocated memory range (0xd4105000-0xd41050ff) for rid 14 of pci0:36:0:0
pcib4: matched entry for 36.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 18
found-> vendor=0x197b, dev=0x2392, revid=0x30
        domain=0, bus=36, slot=0, func=1
        class=08-80-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 3  supports D0 D3  current D0
        MSI supports 1 message
        map[10]: type Memory, range 32, base 0xd4104000, size  8, enabled
pcib4: allocated memory range (0xd4104000-0xd41040ff) for rid 10 of pci0:36:0:1
pcib4: matched entry for 36.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 18
found-> vendor=0x197b, dev=0x2391, revid=0x30
        domain=0, bus=36, slot=0, func=2
        class=08-05-01, hdrtype=0x00, mfdev=1
        cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 3  supports D0 D3  current D0
        MSI supports 1 message
        map[10]: type Memory, range 32, base 0xd4103000, size  8, enabled
pcib4: allocated memory range (0xd4103000-0xd41030ff) for rid 10 of pci0:36:0:2
pcib4: matched entry for 36.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 18
pci36: <serial bus, FireWire> at device 0.0 (no driver attached)
pci36: <base peripheral> at device 0.1 (no driver attached)
sdhci_pci0: <Generic SD HCI> mem 0xd4103000-0xd41030ff irq 18 at device 0.2 on 
pci36
sdhci_pci0-slot0: 50MHz 4bits 3.3V 1.8V DMA
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x00000000 | Version:  0x0000ad01
sdhci_pci0-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci0-slot0: Present:  0x00080000 | Host ctl: 0x00000000
sdhci_pci0-slot0: Power:    0x00000000 | Blk gap:  0x00000000
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000000
sdhci_pci0-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
sdhci_pci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: Caps:     0x054032b2 | Max curr: 0x00000000
sdhci_pci0-slot0: ===========================================
sdhci_pci0: 1 slot(s) allocated
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 63
pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pcib0: allocated type 3 (0xd4000000-0xd40fffff) for rid 20 of pcib5
pcib5:   domain            0
pcib5:   secondary bus     37
pcib5:   subordinate bus   37
pcib5:   memory decode     0xd4000000-0xd40fffff
pci37: <ACPI PCI bus> on pcib5
pci37: domain=0, physical bus=37
found-> vendor=0x8086, dev=0x0082, revid=0x34
        domain=0, bus=37, slot=0, func=0
        class=02-80-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 3  supports D0 D3  current D0
        MSI supports 1 message, 64 bit
        map[10]: type Memory, range 64, base 0xd4000000, size 13, enabled
pcib5: allocated memory range (0xd4000000-0xd4001fff) for rid 10 of pci0:37:0:0
pcib5: matched entry for 37.0.INTA
pcib5: slot 0 INTA hardwired to IRQ 19
iwn0: <Intel Centrino Advanced-N 6205> mem 0xd4000000-0xd4001fff irq 19 at 
device 0.0 on pci37
iwn0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 267 to local APIC 0 vector 64
iwn0: using IRQ 267 for MSI
iwn0: MIMO 2T2R, MoW, address a4:4e:31:12:91:98
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 
36Mbps 48Mbps 54Mbps
iwn0: 2T2R
iwn0: 11na MCS 20MHz
iwn0: MCS 0-7: 6.5Mbps - 65Mbps
iwn0: MCS 8-15: 13Mbps - 130Mbps
iwn0: 11na MCS 20MHz SGI
iwn0: MCS 0-7: 7Mbps - 72Mbps
iwn0: MCS 8-15: 14.5Mbps - 144.5Mbps
iwn0: 11na MCS 40MHz:
iwn0: MCS 0-7: 13.5Mbps - 135Mbps
iwn0: MCS 8-15: 27Mbps - 270Mbps
iwn0: 11na MCS 40MHz SGI:
iwn0: MCS 0-7: 15Mbps - 150Mbps
iwn0: MCS 8-15: 30Mbps - 300Mbps
iwn0: 11ng MCS 20MHz
iwn0: MCS 0-7: 6.5Mbps - 65Mbps
iwn0: MCS 8-15: 13Mbps - 130Mbps
iwn0: 11ng MCS 20MHz SGI
iwn0: MCS 0-7: 7Mbps - 72Mbps
iwn0: MCS 8-15: 14.5Mbps - 144.5Mbps
iwn0: 11ng MCS 40MHz:
iwn0: MCS 0-7: 13.5Mbps - 135Mbps
iwn0: MCS 8-15: 27Mbps - 270Mbps
iwn0: 11ng MCS 40MHz SGI:
iwn0: MCS 0-7: 15Mbps - 150Mbps
iwn0: MCS 8-15: 30Mbps - 300Mbps
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xd4439000-0xd44393ff irq 
16 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
ehci1: usbpf: Attached
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port 
0x5068-0x506f,0x5074-0x5077,0x5060-0x5067,0x5070-0x5073,0x5020-0x503f mem 
0xd4438000-0xd44387ff irq 19 at device 31.2 on pci0
ahci0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 268 to local APIC 0 vector 65
ahci0: using IRQ 268 for MSI
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahci0: Caps: 64bit NCQ SS ALP AL CLO 6Gbps PMD SSC PSC 32cmd EM eSATA 6ports
ahci0: Caps2: APST
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: Caps:
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: Caps:
ahcich2: not probed (disabled)
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: Caps: ESP
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: Caps: ESP
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: Caps: ESP
ahciem0: <AHCI enclosure management bridge> on ahci0
ahciem0: Caps: ALHD XMT SMB LED
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_tz3: <Thermal Zone> on acpi0
acpi_tz4: <Thermal Zone> on acpi0
acpi_tz5: <Thermal Zone> on acpi0
acpi_tz6: <Thermal Zone> on acpi0
acpi_tz7: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 66
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 67
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
ppc1: using extended I/O port range
ppc1: SPP ECP  ECP+EPP
ppc1: <Parallel port> port 0x378-0x37f,0x778-0x77a irq 5 on acpi0
ppc1: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc1: FIFO with 16/16/15 bytes threshold
ioapic0: routing intpin 5 (ISA IRQ 5) to lapic 0 vector 68
ppbus0: <Parallel port bus> on ppc1
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ACPI: Enabled 4 GPEs in block 00 to 3F
acpi0: wakeup code va 0xfffffe0235ae2000 pa 0x90000
ahc_isa_identify 0: ioport 0xc00 alloc failed
ahc_isa_identify 1: ioport 0x1c00 alloc failed
ahc_isa_identify 2: ioport 0x2c00 alloc failed
ahc_isa_identify 3: ioport 0x3c00 alloc failed
ahc_isa_identify 4: ioport 0x4c00 alloc failed
ahc_isa_identify 5: ioport 0x5c00 alloc failed
ahc_isa_identify 6: ioport 0x6c00 alloc failed
ahc_isa_identify 7: ioport 0x7c00 alloc failed
ahc_isa_identify 8: ioport 0x8c00 alloc failed
ahc_isa_identify 9: ioport 0x9c00 alloc failed
ahc_isa_identify 10: ioport 0xac00 alloc failed
ahc_isa_identify 11: ioport 0xbc00 alloc failed
ahc_isa_identify 12: ioport 0xcc00 alloc failed
ahc_isa_identify 13: ioport 0xdc00 alloc failed
ahc_isa_identify 14: ioport 0xec00 alloc failed
ex_isa_identify()
pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0
pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0 failed to probe at irq 7 on isa0
pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0
uart0 failed to probe at port 0x3f8-0x3ff irq 4 on isa0
pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1
uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
wbwd0 failed to probe on isa0
isa_probe_children: probing PnP devices
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 49887747 Hz
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 65536
lo0: bpf attached
hptnr: no controller detected.
hpt27xx: no controller detected.
hptrr: no controller detected.
hdacc0: <IDT 92HD81B1X HDA CODEC> at cad 0 on hdac0
hdaa0: <IDT 92HD81B1X Audio Function Group> at nid 1 on hdacc0
hdaa0: Subsystem ID: 0x103c176b
hdaa0: NumGPIO=3 NumGPO=0 NumGPI=0 GPIWake=1 GPIUnsol=1
hdaa0:  GPIO0: disabled
hdaa0:  GPIO1: disabled
hdaa0:  GPIO2: disabled
hdaa0: Original pins configuration:
hdaa0: nid   0x    as seq device       conn  jack    loc        color   misc
hdaa0: 10 21011030 3  0  Line-out      Jack  1/8     Ext-Rear   Black   0
hdaa0: 11 0421101f 1  15 Headphones    Jack  1/8     Right      Black   0
hdaa0: 12 04a11020 2  0  Mic           Jack  1/8     Right      Black   0
hdaa0: 13 90170110 1  0  Speaker       Fixed Analog  Internal   Unknown 1
hdaa0: 14 40f000f0 15 0  Other         None  Unknown 0x00       Unknown 0
hdaa0: 15 2181102e 2  14 Line-in       Jack  1/8     Ext-Rear   Black   0
hdaa0: 16 40f000f0 15 0  Other         None  Unknown 0x00       Unknown 0
hdaa0: 17 d5a30140 4  0  Mic           Both  ATAPI   0x15       Unknown 1
hdaa0: 31 40f000f0 15 0  Other         None  Unknown 0x00       Unknown 0
hdaa0: 32 40f000f0 15 0  Other         None  Unknown 0x00       Unknown 0
hdaa0: Patched pins configuration:
hdaa0: nid   0x    as seq device       conn  jack    loc        color   misc
hdaa0: 10 21011030 3  0  Line-out      Jack  1/8     Ext-Rear   Black   0
hdaa0: 11 0421101f 1  15 Headphones    Jack  1/8     Right      Black   0
hdaa0: 12 04a11020 2  0  Mic           Jack  1/8     Right      Black   0
hdaa0: 13 90170110 1  0  Speaker       Fixed Analog  Internal   Unknown 1
hdaa0: 14 40f000f0 15 0  Other         None  Unknown 0x00       Unknown 0 DISA
hdaa0: 15 2181102e 2  14 Line-in       Jack  1/8     Ext-Rear   Black   0
hdaa0: 16 40f000f0 15 0  Other         None  Unknown 0x00       Unknown 0 DISA
hdaa0: 17 d5a30140 4  0  Mic           Both  ATAPI   0x15       Unknown 1
hdaa0: 31 40f000f0 15 0  Other         None  Unknown 0x00       Unknown 0 DISA
hdaa0: 32 40f000f0 15 0  Other         None  Unknown 0x00       Unknown 0 DISA
hdaa0: 4 associations found:
hdaa0: Association 0 (1) out:
hdaa0:  Pin nid=13 seq=0
hdaa0:  Pin nid=11 seq=15
hdaa0: Association 1 (2) in:
hdaa0:  Pin nid=12 seq=0
hdaa0:  Pin nid=15 seq=14
hdaa0: Association 2 (3) out:
hdaa0:  Pin nid=10 seq=0
hdaa0: Association 3 (4) in:
hdaa0:  Pin nid=17 seq=0
hdaa0: Tracing association 0 (1)
hdaa0:  Pin 13 traced to DAC 19
hdaa0:  Pin 11 traced to DAC 19 and hpredir 0
hdaa0: Association 0 (1) trace succeeded
hdaa0: Tracing association 1 (2)
hdaa0:  Pin 12 traced to ADC 21
hdaa0:  Pin 15 traced to ADC 21
hdaa0: Association 1 (2) trace succeeded
hdaa0: Tracing association 2 (3)
hdaa0:  Pin 10 traced to DAC 20
hdaa0: Association 2 (3) trace succeeded
hdaa0: Tracing association 3 (4)
hdaa0:  Pin 17 traced to ADC 22
hdaa0: Association 3 (4) trace succeeded
hdaa0: Looking for additional DAC for association 0 (1)
hdaa0: Looking for additional ADC for association 1 (2)
hdaa0: Looking for additional DAC for association 2 (3)
hdaa0: Looking for additional ADC for association 3 (4)
hdaa0: Tracing input monitor
hdaa0:  Tracing nid 27 to out
hdaa0:  nid 27 is input monitor
hdaa0: Tracing other input monitors
hdaa0:  Tracing nid 12 to out
hdaa0:  Tracing nid 15 to out
hdaa0:  Tracing nid 17 to out
hdaa0: Tracing beeper
hdaa0: Headphones redirection for association 0 nid=11 using unsolicited 
responses.
hdaa0: Redirect output to: main
hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
pcm0: <IDT 92HD81B1X (Analog 2.0+HP/2.0)> at nid 13,11 and 12,15 on hdaa0
pcm0: Playback:
pcm0:      Stream cap: 0x00000001 PCM
pcm0:         PCM cap: 0x000e05e0 16 20 24 bits, 44 48 88 96 192 KHz
pcm0:             DAC: 19
pcm0: 
pcm0:     nid=13 [pin: Speaker (Fixed)]
pcm0:       + <- nid=19 [audio output] [src: pcm]
pcm0: 
pcm0:     nid=11 [pin: Headphones (Black Jack)]
pcm0:       + <- nid=19 [audio output] [src: pcm]
pcm0: 
pcm0: Record:
pcm0:      Stream cap: 0x00000001 PCM
pcm0:         PCM cap: 0x000e05e0 16 20 24 bits, 44 48 88 96 192 KHz
pcm0:             ADC: 21
pcm0: 
pcm0:     nid=21 [audio input]
pcm0:       + <- nid=23 [audio selector] [src: line, mic, mix]
pcm0:              + <- nid=12 [pin: Mic (Black Jack)] [src: mic]
pcm0:              + <- nid=15 [pin: Line-in (Black Jack)] [src: line]
pcm0:              + <- nid=27 [audio mixer] [src: mix]
pcm0: 
pcm0: Input Mix:
pcm0: 
pcm0:     nid=27 [audio mixer]
pcm0:       + <- nid=12 [pin: Mic (Black Jack)] [src: mic]
pcm0:       + <- nid=15 [pin: Line-in (Black Jack)] [src: line]
pcm0: 
pcm0: Master Volume (OSS: vol): -95/0dB
pcm0:    +- ctl  7 (nid  19 out):    -95/0dB (128 steps) + mute
pcm0: 
pcm0: PCM Volume (OSS: pcm): -95/0dB
pcm0:    +- ctl  7 (nid  19 out):    -95/0dB (128 steps) + mute
pcm0: 
pcm0: Microphone Volume (OSS: mic): 0/30dB
pcm0:    +- ctl  2 (nid  12 out):    0/30dB (4 steps)
pcm0:    +- ctl  9 (nid  23 out):    0/22dB (16 steps) + mute
pcm0:    +- ctl 11 (nid  27 in   0): -34/12dB (32 steps) + mute
pcm0: 
pcm0: Line-in Volume (OSS: line): 0/30dB
pcm0:    +- ctl  4 (nid  15 out):    0/30dB (4 steps)
pcm0:    +- ctl  9 (nid  23 out):    0/22dB (16 steps) + mute
pcm0:    +- ctl 13 (nid  27 in   2): -34/12dB (32 steps) + mute
pcm0: 
pcm0: Speaker/Beep Volume (OSS: speaker): -18/0dB
pcm0:    +- ctl 20 (nid  33 out):    -18/0dB (4 steps) + mute
pcm0: 
pcm0: Recording Level (OSS: rec): 0/22dB
pcm0:    +- ctl  9 (nid  23 out):    0/22dB (16 steps) + mute
pcm0:    +- ctl 11 (nid  27 in   0): -34/12dB (32 steps) + mute
pcm0:    +- ctl 13 (nid  27 in   2): -34/12dB (32 steps) + mute
pcm0: 
pcm0: Input Mix Level (OSS: mix): 0/22dB
pcm0:    +- ctl  9 (nid  23 out):    0/22dB (16 steps) + mute
pcm0: 
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "line":
pcm0: Mixer "mic":
pcm0: Mixer "mix":
pcm0: Mixer "rec":
pcm0: Mixer "ogain":
pcm0: Playback channel set is: Front Left, Front Right, 
pcm0: Playback channel matrix is: 2.0 (unknown)
pcm0: Recording channel set is: Front Left, Front Right, 
pcm0: Recording channel matrix is: 2.0 (disconnected)
pcm1: <IDT 92HD81B1X (Analog)> at nid 10 and 17 on hdaa0
pcm1: Playback:
pcm1:      Stream cap: 0x00000001 PCM
pcm1:         PCM cap: 0x000e05e0 16 20 24 bits, 44 48 88 96 192 KHz
pcm1:             DAC: 20
pcm1: 
pcm1:     nid=10 [pin: Line-out (Black Jack)]
pcm1:       + <- nid=20 [audio output] [src: pcm]
pcm1: 
pcm1: Record:
pcm1:      Stream cap: 0x00000001 PCM
pcm1:         PCM cap: 0x000e05e0 16 20 24 bits, 44 48 88 96 192 KHz
pcm1:             ADC: 22
pcm1: 
pcm1:     nid=22 [audio input]
pcm1:       + <- nid=24 [audio selector] [src: monitor]
pcm1:              + <- nid=17 [pin: Mic (Both)] [src: monitor]
pcm1: 
pcm1: Master Volume (OSS: vol): -95/0dB
pcm1:    +- ctl  8 (nid  20 out):    -95/0dB (128 steps) + mute
pcm1: 
pcm1: PCM Volume (OSS: pcm): -95/0dB
pcm1:    +- ctl  8 (nid  20 out):    -95/0dB (128 steps) + mute
pcm1: 
pcm1: Microphone2 Volume (OSS: monitor): 0/30dB
pcm1:    +- ctl  5 (nid  17 out):    0/30dB (4 steps)
pcm1:    +- ctl 10 (nid  24 out):    0/22dB (16 steps) + mute
pcm1: 
pcm1: Recording Level (OSS: rec): 0/22dB
pcm1:    +- ctl  5 (nid  17 out):    0/30dB (4 steps)
pcm1:    +- ctl 10 (nid  24 out):    0/22dB (16 steps) + mute
pcm1: 
pcm1: Mixer "vol":
pcm1: Mixer "pcm":
pcm1: Mixer "rec":
pcm1: Mixer "ogain":
pcm1: Mixer "monitor":
pcm1: Playback channel set is: Front Left, Front Right, 
pcm1: Playback channel matrix is: 2.0 (disconnected)
pcm1: Automatically set rec source to: monitor
pcm1: Recording channel set is: Front Left, Front Right, 
pcm1: Recording channel matrix is: 2.0 (unknown)
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ahcich0: AHCI reset...
ahcich0: SATA connect time=1000us status=00000123
ahcich0: AHCI reset: device found
ahcich1: AHCI reset...
ahcich1: SATA connect time=1800us status=00000113
ahcich1: AHCI reset: device found
ahcich1: AHCI reset: device ready after 0ms
ahcich3: AHCI reset...
ugen1.1: <Intel> at usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <0x8086> at usbus0
uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ahcich3: SATA connect timeout time=10000us status=00000000
ahcich3: AHCI reset: device not found
ahcich4: AHCI reset...
ahcich4: SATA connect timeout time=10000us status=00000000
ahcich4: AHCI reset: device not found
ahcich5: AHCI reset...
ahcich5: SATA connect timeout time=10000us status=00000000
ahcich5: AHCI reset: device not found
battery0: battery initialization start
battery1: battery initialization start
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ahcich0: AHCI reset: device ready after 100ms
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <HGST HTS725050A7E630 GH2OA440> ATA-9 SATA 2.x device
ada0: Serial Number TF0500Y91YESKL
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
GEOM: new disk ada0
GEOM: new disk cd0
ses0 at ahciem0 bus 0 scbus5 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
pass0 at ahcich0 bus 0 scbus0 target 0 lun 0
pass0: <HGST HTS725050A7E630 GH2OA440> ATA-9 SATA 2.x device
pass0: Serial Number TF0500Y91YESKL
pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ses0: Generation Code 0x0 has 1 SubEnclosures
ses0:  SubEnclosure ID 0, 1 Types With this ID, Descriptor Length 36, offset 8
ses0: WWN: 0
ses0:  Type Desc[0]: Type 0x17, MaxElt 6, In Subenc 0, Text Length 0: 
pass0: Command Queueing enabled
pass1 at ahcich1 bus 0 scbus1 target 0 lun 0
pass1: <hp CDDVDW SN-208DB HH01> Removable CD-ROM SCSI-0 device 
pass1: Serial Number R8Y66GOCC00JQQ
pass1: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
pass2 at ahciem0 bus 0 scbus5 target 0 lun 0
pass2: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <hp CDDVDW SN-208DB HH01> Removable CD-ROM SCSI-0 device 
cd0: Serial Number R8Y66GOCC00JQQ
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray 
closed
battery0: battery initialization done, tried 1 times
Netvsc initializing... lapic7: CMCI unmasked
lapic6: CMCI unmasked
lapic3: CMCI unmasked
lapic2: CMCI unmasked
lapic4: CMCI unmasked
lapic5: CMCI unmasked
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
   cmci: 0x000100f2
SMP: AP CPU #3 Launched!
cpu3 AP:
     ID: 0x03000000   VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
   cmci: 0x000000f2
SMP: AP CPU #4 Launched!
cpu4 AP:
     ID: 0x04000000   VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
   cmci: 0x000000f2
SMP: AP CPU #6 Launched!
cpu6 AP:
     ID: 0x06000000   VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
   cmci: 0x000000f2
SMP: AP CPU #2 Launched!
cpu2 AP:
     ID: 0x02000000   VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
   cmci: 0x000000f2
SMP: AP CPU #7 Launched!
cpu7 AP:
     ID: 0x07000000   VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
   cmci: 0x000000f2
SMP: AP CPU #5 Launched!
cpu5 AP:
     ID: 0x05000000   VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
   cmci: 0x000000f2
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 1 vector 48
ioapic0: routing intpin 5 (ISA IRQ 5) to lapic 2 vector 48
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 3 vector 48
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 4 vector 48
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 5 vector 48
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 6 vector 48
msi: Assigning MSI-X IRQ 257 to local APIC 1 vector 49
msi: Assigning MSI-X IRQ 258 to local APIC 2 vector 49
msi: Assigning MSI-X IRQ 259 to local APIC 3 vector 49
msi: Assigning MSI-X IRQ 260 to local APIC 4 vector 49
msi: Assigning MSI-X IRQ 261 to local APIC 5 vector 49
msi: Assigning MSI-X IRQ 262 to local APIC 6 vector 49
msi: Assigning MSI-X IRQ 263 to local APIC 7 vector 48
msi: Assigning MSI IRQ 264 to local APIC 7 vector 49
msi: Assigning MSI IRQ 266 to local APIC 1 vector 50
msi: Assigning MSI IRQ 267 to local APIC 2 vector 50
msi: Assigning MSI IRQ 268 to local APIC 3 vector 50
SMP: passed TSC synchronization test
TSC timecounter discards lower 1 bit(s)
Timecounter "TSC-low" frequency 1197305844 Hz quality 1000
GEOM_PART: partition 1 is not aligned on 4096 bytes
GEOM_PART: partition 3 is not aligned on 4096 bytes
GEOM_PART: partition 1 is not aligned on 4096 bytes
GEOM_PART: partition 2 is not aligned on 4096 bytes
GEOM_PART: partition 4 is not aligned on 4096 bytes
GEOM_PART: partition 5 is not aligned on 4096 bytes
GEOM_PART: partition 6 is not aligned on 4096 bytes
GEOM_PART: partition 7 is not aligned on 4096 bytes
uhub1: 8 ports with 8 removable, self powered
GEOM_PART: partition 1 is not aligned on 4096 bytes
GEOM_PART: partition 3 is not aligned on 4096 bytes
GEOM_PART: partition 1 is not aligned on 4096 bytes
GEOM_PART: partition 2 is not aligned on 4096 bytes
GEOM_PART: partition 4 is not aligned on 4096 bytes
GEOM_PART: partition 5 is not aligned on 4096 bytes
GEOM_PART: partition 6 is not aligned on 4096 bytes
GEOM_PART: partition 7 is not aligned on 4096 bytes
Root mount waiting for: usbus2 usbus1
uhub2: 3 ports with 3 removable, self powered
uhub0: 3 ports with 3 removable, self powered
Root mount waiting for: usbus2 usbus1
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on 
usbus1
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on 
usbus2
Root mount waiting for: usbus2 usbus1
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
Root mount waiting for: usbus2 usbus1
ugen1.3: <vendor 0x138a> at usbus1
ugen2.3: <Broadcom Corp> at usbus2
ugen1.4: <Chicony Electronics Co., Ltd.> at usbus1
Trying to mount root from ufs:/dev/ada0s1a [rw]...
start_init: trying /sbin/init
em0: Link is up 100 Mbps Full Duplex
ubt0: <Broadcom Corp BCM20702A0, rev 2.00/1.12, addr 3> on usbus2
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
battery1: battery initialization failed, giving up
hw.acpi.supported_sleep_state: S3 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S3
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: NONE
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 0
hw.acpi.verbose: 0
hw.acpi.disable_on_reboot: 0
hw.acpi.handle_reboot: 1
hw.acpi.reset_video: 0
hw.acpi.cpu.cx_lowest: C1
hw.acpi.battery.life: 96
hw.acpi.battery.time: -1
hw.acpi.battery.state: 0
hw.acpi.battery.units: 2
hw.acpi.battery.info_expire: 5
hw.acpi.acline: 1
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 10
hw.acpi.thermal.user_override: 0
hw.acpi.thermal.tz0.temperature: 57.0C
hw.acpi.thermal.tz0.active: -1
hw.acpi.thermal.tz0.passive_cooling: 0
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: -1
hw.acpi.thermal.tz0._HOT: 104.0C
hw.acpi.thermal.tz0._CRT: 128.0C
hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
hw.acpi.thermal.tz0._TC1: -1
hw.acpi.thermal.tz0._TC2: -1
hw.acpi.thermal.tz0._TSP: -1
hw.acpi.thermal.tz1.temperature: 51.0C
hw.acpi.thermal.tz1.active: -1
hw.acpi.thermal.tz1.passive_cooling: 1
hw.acpi.thermal.tz1.thermal_flags: 0
hw.acpi.thermal.tz1._PSV: 108.0C
hw.acpi.thermal.tz1._HOT: -1
hw.acpi.thermal.tz1._CRT: 128.0C
hw.acpi.thermal.tz1._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
hw.acpi.thermal.tz1._TC1: 1
hw.acpi.thermal.tz1._TC2: 2
hw.acpi.thermal.tz1._TSP: 300
hw.acpi.thermal.tz2.temperature: 47.0C
hw.acpi.thermal.tz2.active: -1
hw.acpi.thermal.tz2.passive_cooling: 0
hw.acpi.thermal.tz2.thermal_flags: 0
hw.acpi.thermal.tz2._PSV: -1
hw.acpi.thermal.tz2._HOT: -1
hw.acpi.thermal.tz2._CRT: 128.0C
hw.acpi.thermal.tz2._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
hw.acpi.thermal.tz2._TC1: -1
hw.acpi.thermal.tz2._TC2: -1
hw.acpi.thermal.tz2._TSP: -1
hw.acpi.thermal.tz3.temperature: 47.0C
hw.acpi.thermal.tz3.active: -1
hw.acpi.thermal.tz3.passive_cooling: 0
hw.acpi.thermal.tz3.thermal_flags: 0
hw.acpi.thermal.tz3._PSV: -1
hw.acpi.thermal.tz3._HOT: -1
hw.acpi.thermal.tz3._CRT: 128.0C
hw.acpi.thermal.tz3._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
hw.acpi.thermal.tz3._TC1: -1
hw.acpi.thermal.tz3._TC2: -1
hw.acpi.thermal.tz3._TSP: -1
hw.acpi.thermal.tz4.temperature: 31.0C
hw.acpi.thermal.tz4.active: -1
hw.acpi.thermal.tz4.passive_cooling: 0
hw.acpi.thermal.tz4.thermal_flags: 0
hw.acpi.thermal.tz4._PSV: 55.0C
hw.acpi.thermal.tz4._HOT: -1
hw.acpi.thermal.tz4._CRT: 128.0C
hw.acpi.thermal.tz4._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
hw.acpi.thermal.tz4._TC1: 50
hw.acpi.thermal.tz4._TC2: 0
hw.acpi.thermal.tz4._TSP: 300
hw.acpi.thermal.tz5.temperature: 127.0C
hw.acpi.thermal.tz5.active: -1
hw.acpi.thermal.tz5.passive_cooling: 0
hw.acpi.thermal.tz5.thermal_flags: 0
hw.acpi.thermal.tz5._PSV: -1
hw.acpi.thermal.tz5._HOT: -1
hw.acpi.thermal.tz5._CRT: 128.0C
hw.acpi.thermal.tz5._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
hw.acpi.thermal.tz5._TC1: -1
hw.acpi.thermal.tz5._TC2: -1
hw.acpi.thermal.tz5._TSP: -1
hw.acpi.thermal.tz6.temperature: 0.0C
hw.acpi.thermal.tz6.active: -1
hw.acpi.thermal.tz6.passive_cooling: 0
hw.acpi.thermal.tz6.thermal_flags: 0
hw.acpi.thermal.tz6._PSV: -1
hw.acpi.thermal.tz6._HOT: -1
hw.acpi.thermal.tz6._CRT: 128.0C
hw.acpi.thermal.tz6._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
hw.acpi.thermal.tz6._TC1: -1
hw.acpi.thermal.tz6._TC2: -1
hw.acpi.thermal.tz6._TSP: -1
hw.acpi.thermal.tz7.temperature: 0.0C
hw.acpi.thermal.tz7.active: -1
hw.acpi.thermal.tz7.passive_cooling: 0
hw.acpi.thermal.tz7.thermal_flags: 0
hw.acpi.thermal.tz7._PSV: -1
hw.acpi.thermal.tz7._HOT: -1
hw.acpi.thermal.tz7._CRT: 128.0C
hw.acpi.thermal.tz7._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
hw.acpi.thermal.tz7._TC1: -1
hw.acpi.thermal.tz7._TC2: -1
hw.acpi.thermal.tz7._TSP: -1
_______________________________________________
freebsd-acpi@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-acpi
To unsubscribe, send any mail to "freebsd-acpi-unsubscr...@freebsd.org"

Reply via email to