On 02/28/12 22:03, Bruce Evans wrote:


But why would you want it? It is essentially unusable on sparc64,
since it is several thousand times slower than 80-bit floating point
on i386. At equal CPU clock speeds, it is only about 1000 times slower.
Most of the factors of 10 are due to fundamental slowness of multi-
word artithmetic in software and the soft-float implementations not
being very good (I only tested with the old NetBSD/4.4BSD-derived one.
This has been replaced by the Hauser one, which has good chances for
being worse due to its greater generality and correctness, but the old
one has a lot of slop to improve). A modern x86 is much faster than
an old sparc64, giving about another factor of 10. 64-bit operations
are only about this 10 times slower (or more like 3 times slower at
equal CPU clock speeds) on an old sparc64 as on a not-so-modern core2
x86. The gnu libraries might be better. So you could hope for only
a factor of 100 slowdown on scalar code. But modern x86's can also
do vector code, and thus be up to 8 times faster for 32-bit floating
point with AVX. Really good multi-word libraries might be able to
exploit some vector operations, but I think multi-word operations are
too seial in nature to get much parallelism with them.

I have an application that takes 10 days to run on a 4.16GHz Core-i7 3930K. No output until it finishes.

When I first started looking at this, I naively thought the 80-bit FPU floats were scaled to 128-bits. Would be nice...

The application uses libgmp, but, about 1/2 to 2/3 of the work will fit in a 128-bit float.

I wanted to get 128-bit floating point operations so I could do 2/3 the work in an FPU. With 80-bits, I can only do 1/3 the work(+-).

Mostly, this is just "can I do it faster...". Maybe some asm code to work the inner loops in FPU registers. At some point, hand off to libgmp. I now think the speed improvement would not be worth the work.

Tom Dean
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-amd64
To unsubscribe, send any mail to "[email protected]"

Reply via email to