On Thu, Oct 18, 2012 at 1:58 PM, Jim Harris <[email protected]> wrote: > On Thu, Oct 18, 2012 at 1:44 PM, John Baldwin <[email protected]> wrote: >> On Thursday, October 18, 2012 12:10:01 pm Jim Harris wrote: >>> Intel C60x chipsets have 2 disk controllers - the SATA controller >>> (which most people are familiar with), and an integrated SAS >>> controller. The isci(4) driver for the SAS controller was added to >>> FreeBSD in January - too late for 9.0, but did make it into 8.3 and >>> will be in 9.1. My guess is the HDD in question is attached to the >>> SAS controller, and not the SATA controller. I know that SuperMicro >>> systems ship with the front disk slots connected to the SAS >>> controller. >>> >>> On 8.3, can you run "camcontrol devlist -v" and check whether the disk >>> in question is on an isciX or ahcichX bus? >> >> I think 9.0 didn't have the PCI ID for the onboard SATA in RAID mode either? >> > > John's correct. > > I assume this missing PCI ID isn't the issue since you said your > problem on 9.0 occurred in both AHCI and RAID mode. But if you do > move the HDD to the SATA controller and use 9.0, you will need to put > the SATA controller in AHCI mode. > > Thanks, > > -Jim
Sorry - I obviously meant this to go to gnats and the original submitter. -Jim _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-amd64 To unsubscribe, send any mail to "[email protected]"
