https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=207305
Bug ID: 207305
Summary: An issue related with pf
Product: Base System
Version: 10.2-RELEASE
Hardware: amd64
OS: Any
Status: New
Severity: Affects Many People
Priority: ---
Component: standards
Assignee: [email protected]
Reporter: [email protected]
CC: [email protected]
CC: [email protected]
Hi,
It seems like a bug pf on 10.2p9 the option "self" gives the error : "no
translation address with matching address family found."
Here is my pf configuration :
if_ext="vlan150"
if_ext1="vlan100"
default_gw="10.0.0.1"
default_nat="8.1.12.3"
all_ifs="{" $if_ext $if_ext1 "}"
nat on $if_ext1 from self to ! $default_gw -> $default_nat
#nat on vlan100 inet from 127.0.0.1 to ! 10.0.0.1 -> $default_nat
#nat on vlan100 inet from 10.0.0.4 to ! 10.0.0.1 -> $default_nat
#nat on vlan100 inet from 10.0.1.4 to ! 10.0.0.1 -> $default_nat
#nat on vlan100 inet from 8.1.12.2 to ! 10.0.0.1 -> $default_nat
#nat on vlan100 inet from 6.19.1.8 to ! 10.0.0.1 -> $default_nat
pass in quick on $all_ifs inet keep state
pass out quick on $all_ifs inet keep state
Error if i reload it :
pfctl -f /etc/pf.conf
No ALTQ support in kernel
ALTQ related functions disabled
/etc/pf.conf:6: no translation address with matching address family found.
pfctl: Syntax error in config file: pf rules not loaded
if i replace the line :
nat on $if_ext1 from self to ! $default_gw -> $default_nat
per :
#nat on vlan100 inet from 127.0.0.1 to ! 10.0.0.1 -> $default_nat
#nat on vlan100 inet from 10.0.0.4 to ! 10.0.0.1 -> $default_nat
#nat on vlan100 inet from 10.0.1.4 to ! 10.0.0.1 -> $default_nat
#nat on vlan100 inet from 8.1.12.2 to ! 10.0.0.1 -> $default_nat
#nat on vlan100 inet from 6.19.1.8 to ! 10.0.0.1 -> $default_nat
i can able to reload pf without any issue. Thanks to see.
Regards,
Marecar Riyaz
--
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-amd64
To unsubscribe, send any mail to "[email protected]"
