Hello, All!
The help in debugging netgraph bluetooth stack is necessary to me.
I have a working example on i386, but on sparc64 same example
does not work. On sparc64(SMP) I have following debug information:
$ uname -a
FreeBSD bel.localdomain 6.1-PRERELEASE FreeBSD 6.1-PRERELEASE #11: Tue Apr 25
14:08:31 MSD 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/SUNC3D sparc64
$ obexapp -c -a POCKET_PC -C FTRN -f
OBEX_TransportConnect():
obex_transport_connect_request(): Custom connect
[pause at ~60 seconds]
obex_transport_connect_request(): ret=-1
obex_transport_disconnect_request(): Custom disconnect
obex_transport_disconnect_server(): Custom disconnect
obexapp_transport_connect(): Could not connect socket. Operation timed out (60)
obexapp_client(): OBEX_TransportConnect failed
# l2control -a bel Read_Channel_List
L2CAP channels:
Remote BD_ADDR SCID/ DCID PSM IMTU/ OMTU State
POCKET_PC 65/ 65 3 0/ 1691 OPEN
# hcidump -r /tmp/obexftrn.hcidump
HCIDump - HCI packet analyzer ver 1.5
< HCI Command: Create Connection(0x01|0x0005) plen 13
HCI Event: Command Status(0x0f) plen 4
HCI Event: Connect Complete(0x03) plen 11
< HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4
< ACL data: handle 0x0001 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
HCI Event: Max Slots Change(0x1b) plen 3
HCI Event: Command Complete(0x0e) plen 6
HCI Event: Number of Completed Packets(0x13) plen 5
ACL data: handle 0x0001 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
< ACL data: handle 0x0001 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0
HCI Event: Number of Completed Packets(0x13) plen 5
ACL data: handle 0x0001 flags 0x02 dlen 20
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 8
MTU 512 FlushTO 65535
< ACL data: handle 0x0001 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
ACL data: handle 0x0001 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0001 flags 0x02 dlen 24
L2CAP(d): cid 0x40 len 20 [psm 1]
SDP SSA Req: tid 0x0 len 0xf
pat uuid-16 0x1106 (OBEXObjTrnsf)
max 0xffff
aid(s) 0x0004 (ProtocolDescList)
cont 00
HCI Event: Number of Completed Packets(0x13) plen 5
HCI Event: Number of Completed Packets(0x13) plen 5
ACL data: handle 0x0001 flags 0x02 dlen 39
L2CAP(d): cid 0x40 len 35 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x1e
cnt 0x1b
srv rec #0
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x3 > <
uuid-16 0x0008 (OBEX) > >
cont 00
< ACL data: handle 0x0001 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 0x0001 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0041
HCI Event: Number of Completed Packets(0x13) plen 5
HCI Event: Number of Completed Packets(0x13) plen 5
ACL data: handle 0x0001 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
ACL data: handle 0x0001 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0041 scid 0x0041 result 0 status 0
< ACL data: handle 0x0001 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0041 flags 0x0000 clen 4
MTU 0
[hmmm, MTU=0! Why?]
ACL data: handle 0x0001 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0041 flags 0x0000 clen 4
MTU 1691
< ACL data: handle 0x0001 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x0000 result 0 clen 0
HCI Event: Number of Completed Packets(0x13) plen 5
HCI Event: Number of Completed Packets(0x13) plen 5
ACL data: handle 0x0001 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0001 flags 0x02 dlen 8
L2CAP(d): cid 0x41 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
HCI Event: Number of Completed Packets(0x13) plen 5
[pause at ~60 seconds]
< ACL data: handle 0x0001 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0041 scid 0x0041
HCI Event: Number of Completed Packets(0x13) plen 5
ACL data: handle 0x0001 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0041 scid 0x0041
HCI Event: Disconn Complete(0x05) plen 4
Messages from modified (for debugging) kernel:
ng_btsocket_rfcomm_session_create: sosetopt: mtu=672
ng_btsocket_l2cap_ctloutput: SOPT_SET: SO_L2CAP_IMTU: pcb->imtu=0
Why MTU is 0? Any ideas are welcomed.
--
With Best Regards,
Andrew Belashov.
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-bluetooth
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
