>Number: 144724
>Category: kern
>Synopsis: if_bwn does not pass traffic when in PIO mode
>Confidential: no
>Severity: non-critical
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sun Mar 14 00:50:01 UTC 2010
>Closed-Date:
>Last-Modified:
>Originator: Joe Marcus Clarke
>Release: 9-CURRENT
>Organization:
>Environment:
FreeBSD 9.0-CURRENT #105: Wed Mar 3 23:37:36 EST 2010
[email protected]:/usr/obj/usr/src/sys/SALAMI i386
>Description:
When putting the bwn driver into PIO mode in my Dell Vostro 2510, the card
associates, but does not pass traffic.
Weongyo Jeong has been looking into this, and asked me to file a PR. Here is
the link to the dmesg output when running with a debug patch. This output is
when the driver is in (working) DMA mode:
http://www.marcuscom.com/downloads/salami_dma.dmesg
This is when the driver is put into PIO mode:
http://www.marcuscom.com/downloads/salami_pio.dmesg
Note: running in DMA mode is spotty for me. Sometimes it works, but other
times, the driver enters a fatal DMA error loop, and the laptop must be
rebooted (power cycled) to recover.
My card is an LP PHY card:
siba_b...@pci0:6:0:0: class=0x028000 card=0x000b1028 chip=0x431514e4 rev=0x01
hdr=0x00
vendor = 'Broadcom Corporation'
device = 'Broadcom Wireless b/g (BCM4315/BCM22062000)'
class = network
>How-To-Repeat:
Set hw.bwn.usedma="0" in loader.conf, then reboot.
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-bugs
To unsubscribe, send any mail to "[email protected]"
