The following reply was made to PR kern/151447; it has been noted by GNATS.
From: Darren Reed <[email protected]> To: [email protected], [email protected] Cc: Subject: Re: kern/151447: [ata] FAILURE - READ_DMA48 timed out LBA=3907029167 Date: Thu, 14 Oct 2010 23:18:05 +0000 Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-BETA4 #0: Sun Sep 6 05:51:03 UTC 2009 [email protected]:/usr/obj/usr/src/sys/GENERIC <mailto:[email protected]:/usr/obj/usr/src/sys/GENERIC> WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz (2667.97-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x106a5 Stepping = 5 Features=0xfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM OV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS> Features2=0x80982201<SSE3,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,<b31>> AMD Features=0x28100000<NX,RDTSCP,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 1073741824 (1024 MB) avail memory = 1031798784 (984 MB) ACPI APIC Table: <PTLTD APIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <INTEL 440BX> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x37 6,0x10c0-0x10cf at device 7.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] pci0: <bridge> at device 7.3 (no driver attached) pci0: <base peripheral> at device 7.7 (no driver attached) vgapci0: <VGA-compatible display> port 0x10d0-0x10df mem 0xd0000000-0xd7ffffff,0 xd8000000-0xd87fffff irq 16 at device 15.0 on pci0 mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x1400-0x14ff mem 0xd8820000-0xd883fff f,0xd8800000-0xd881ffff irq 17 at device 16.0 on pci0 mpt0: [ITHREAD] mpt0: MPI Version=1.2.0.0 pcib2: <ACPI PCI-PCI bridge> at device 17.0 on pci0 pci2: <ACPI PCI bus> on pcib2 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x20c0-0x20df irq 18 at de vice 0.0 on pci2 uhci0: [ITHREAD] usbus0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0x2000-0x203f mem 0xd894 0000-0xd895ffff,0xd8900000-0xd890ffff irq 19 at device 1.0 on pci2 em0: Memory Access and/or Bus Master bits were not set! em0: [FILTER] em0: Ethernet address: 00:0c:29:2d:fc:09 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd8930000-0xd8930fff irq 16 at d evice 2.0 on pci2 ehci0: [ITHREAD] usbus1: EHCI version 1.0 usbus1: <EHCI (generic) USB 2.0 controller> on ehci0 em1: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0x2040-0x207f mem 0xd896 0000-0xd897ffff,0xd8910000-0xd891ffff irq 18 at device 4.0 on pci2 em1: Memory Access and/or Bus Master bits were not set! em1: [FILTER] em1: Ethernet address: 00:0c:29:2d:fc:13 em2: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0x2080-0x20bf mem 0xd898 0000-0xd899ffff,0xd8920000-0xd892ffff irq 19 at device 5.0 on pci2 em2: Memory Access and/or Bus Master bits were not set! em2: [FILTER] em2: Ethernet address: 00:0c:29:2d:fc:1d pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 21.1 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 21.2 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 21.3 on pci0 pci6: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> at device 21.4 on pci0 pci7: <ACPI PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 21.5 on pci0 pci8: <ACPI PCI bus> on pcib8 pcib9: <ACPI PCI-PCI bridge> at device 21.6 on pci0 pci9: <ACPI PCI bus> on pcib9 pcib10: <ACPI PCI-PCI bridge> at device 21.7 on pci0 pci10: <ACPI PCI bus> on pcib10 pcib11: <ACPI PCI-PCI bridge> at device 22.0 on pci0 pci11: <ACPI PCI bus> on pcib11 pcib12: <ACPI PCI-PCI bridge> at device 22.1 on pci0 pci12: <ACPI PCI bus> on pcib12 pcib13: <ACPI PCI-PCI bridge> at device 22.2 on pci0 pci13: <ACPI PCI bus> on pcib13 pcib14: <ACPI PCI-PCI bridge> at device 22.3 on pci0 pci14: <ACPI PCI bus> on pcib14 pcib15: <ACPI PCI-PCI bridge> at device 22.4 on pci0 pci15: <ACPI PCI bus> on pcib15 pcib16: <ACPI PCI-PCI bridge> at device 22.5 on pci0 pci16: <ACPI PCI bus> on pcib16 pcib17: <ACPI PCI-PCI bridge> at device 22.6 on pci0 pci17: <ACPI PCI bus> on pcib17 pcib18: <ACPI PCI-PCI bridge> at device 22.7 on pci0 pci18: <ACPI PCI bus> on pcib18 pcib19: <ACPI PCI-PCI bridge> at device 23.0 on pci0 pci19: <ACPI PCI bus> on pcib19 pcib20: <ACPI PCI-PCI bridge> at device 23.1 on pci0 pci20: <ACPI PCI bus> on pcib20 pcib21: <ACPI PCI-PCI bridge> at device 23.2 on pci0 pci21: <ACPI PCI bus> on pcib21 pcib22: <ACPI PCI-PCI bridge> at device 23.3 on pci0 pci22: <ACPI PCI bus> on pcib22 pcib23: <ACPI PCI-PCI bridge> at device 23.4 on pci0 pci23: <ACPI PCI bus> on pcib23 pcib24: <ACPI PCI-PCI bridge> at device 23.5 on pci0 pci24: <ACPI PCI bus> on pcib24 pcib25: <ACPI PCI-PCI bridge> at device 23.6 on pci0 pci25: <ACPI PCI bus> on pcib25 pcib26: <ACPI PCI-PCI bridge> at device 23.7 on pci0 pci26: <ACPI PCI bus> on pcib26 pcib27: <ACPI PCI-PCI bridge> at device 24.0 on pci0 pci27: <ACPI PCI bus> on pcib27 pcib28: <ACPI PCI-PCI bridge> at device 24.1 on pci0 pci28: <ACPI PCI bus> on pcib28 pcib29: <ACPI PCI-PCI bridge> at device 24.2 on pci0 pci29: <ACPI PCI bus> on pcib29 pcib30: <ACPI PCI-PCI bridge> at device 24.3 on pci0 pci30: <ACPI PCI bus> on pcib30 pcib31: <ACPI PCI-PCI bridge> at device 24.4 on pci0 pci31: <ACPI PCI bus> on pcib31 pcib32: <ACPI PCI-PCI bridge> at device 24.5 on pci0 pci32: <ACPI PCI bus> on pcib32 pcib33: <ACPI PCI-PCI bridge> at device 24.6 on pci0 pci33: <ACPI PCI bus> on pcib33 pcib34: <ACPI PCI-PCI bridge> at device 24.7 on pci0 pci34: <ACPI PCI bus> on pcib34 acpi_acad0: <AC Adapter> on acpi0 acpi_button0: <Sleep Button> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3 ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppc0: [ITHREAD] ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: [ITHREAD] lpt0: <Printer> on ppbus0 lpt0: [ITHREAD] lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart1: [FILTER] fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 smist0: <SpeedStep SMI> on cpu0 device_attach: smist0 attach returned 6 cpu1: <ACPI CPU> on acpi0 acpi_throttle1: <ACPI CPU Throttling> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 smist1: <SpeedStep SMI> on cpu1 device_attach: smist1 attach returned 6 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff ,0xca000-0xcafff,0xdc000-0xdffff,0xe4000-0xe7fff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 ad0: 610480MB <VMware Virtual IDE Hard Drive 00000001> at ata0-master UDMA33 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <(0x15ad)> at usbus1 uhub1: <(0x15ad) EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 GEOM: ad0: partition 3 does not start on a track boundary. GEOM: ad0: partition 3 does not end on a track boundary. GEOM: ad0: partition 2 does not start on a track boundary. GEOM: ad0: partition 2 does not end on a track boundary. ad1: 1907729MB <VMware Virtual IDE Hard Drive 00000001> at ata0-slave UDMA33 uhub0: 2 ports with 2 removable, self powered fdc0: ready for output in input fdc0: ready for output in input fdc0: ready for output in input fdc0: ready for output in input fdc0: ready for output in input fdc0: ready for output in input fdc0: ready for output in input fdc0: ready for output in input uhub1: 6 ports with 6 removable, self powered ad1: FAILURE - READ_DMA48 timed out LBA=3907029165 ad1: FAILURE - READ_DMA48 timed out LBA=3907029151 ad1: FAILURE - READ_DMA48 timed out LBA=3907029164 ad1: FAILURE - READ_DMA48 timed out LBA=3907029167 ad1: FAILURE - READ_DMA48 timed out LBA=3907029167 ad1: FAILURE - READ_DMA48 timed out LBA=3907028727 acd0: CDROM <VMware Virtual IDE CDROM Drive/00000001> at ata1-master UDMA33 Waiting 5 seconds for SCSI devices to settle SMP: AP CPU #1 Launched! WARNING: WITNESS option enabled, expect reduced performance. GEOM: ad0s4: geometry does not match label (255h,63s != 15h,63s). ad1: TIMEOUT - READ_DMA48 retrying (1 retry left) LBA=3907029167 ad1: TIMEOUT - READ_DMA48 retrying (0 retries left) LBA=3907029167 ad1: FAILURE - READ_DMA48 timed out LBA=3907029167 GEOM: ad1: invalid disklabel. Trying to mount root from ufs:/dev/ad0s4a WARNING: ZFS is considered to be an experimental feature in FreeBSD. ZFS NOTICE: prefetch is disabled by default on i386 - add enable to tunable to c hange. ZFS filesystem version 13 ZFS storage pool version 13 pid 871 (ps), uid 0: exited on signal 11 (core dumped) pid 888 (fstat), uid 0: exited on signal 11 _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-bugs To unsubscribe, send any mail to "[email protected]"
