>Number: 167847
>Category: kern
>Synopsis: dlink dwl-122g e crashes(?) when trying wap2 crypto
>Confidential: no
>Severity: non-critical
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sun May 13 20:40:02 UTC 2012
>Closed-Date:
>Last-Modified:
>Originator: Christopher J. Ruwe
>Release: 9-stable
>Organization:
>Environment:
FreeBSD dijkstra.cruwe.de 9.0-STABLE FreeBSD 9.0-STABLE #3: Wed Feb 8 22:39:10
CET 2012
[email protected]:/usr/obj/usr/home/cjr/media/src/freebsd/9/sys/DIJKSTRA
amd64
>Description:
A usb wifi dongle, dlink g-122g revision e, works using the ural module, which
apparently loads if_run.ko and gives run0 as an interface.
It is possible to use the dongle as a wifi ap from several wifi clients with
these lines in /etc/rc.conf:
wlans_run0="wlan0"
create_args_wlan0="wlanmode hostap"
ifconfig_wlan0="inet 192.168.3.1 netmask 255.255.255.0 ssid bsdap mode 11g"
When trying to encrypt wlan traffic with WPA2, using either ifconfig ...
authmode wpa or hostapd, it is neither possible to connect to the wifi ap nor
to see the wifi ap with the usual tools. The system appears to be under load,
other network traffic gets very slow and setting the dongle in unencrypted mode
does not change the situation. The issue resolves when manually removing the
usb dongle. Having manually removed the usb dongle, it is possible to connect
unencrypted again. I interpret this as crashing of the if_run driver or the
associated wlan-modules.
My hostapd.conf is as follows (comments taken out):
File Edit Options Buffers Tools Help
interface=wlan0
logger_syslog=-1
logger_syslog_level=2
logger_stdout=-1
logger_stdout_level=2
dump_file=/tmp/hostapd.dump
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
ssid=bsdap
country_code=US
hw_mode=g
channel=60
beacon_int=100
dtim_period=2
max_num_sta=255
rts_threshold=2347
fragm_threshold=2346
macaddr_acl=0
auth_algs=1
ignore_broadcast_ssid=0
wmm_enabled=1
wmm_ac_bk_cwmin=4
wmm_ac_bk_cwmax=10
wmm_ac_bk_aifs=7
wmm_ac_bk_txop_limit=0
wmm_ac_bk_acm=0
wmm_ac_be_aifs=3
wmm_ac_be_cwmin=4
wmm_ac_be_cwmax=10
wmm_ac_be_txop_limit=0
wmm_ac_be_acm=0
wmm_ac_vi_aifs=2
wmm_ac_vi_cwmin=3
wmm_ac_vi_cwmax=4
wmm_ac_vi_txop_limit=94
wmm_ac_vi_acm=0
wmm_ac_vo_aifs=2
wmm_ac_vo_cwmin=2
wmm_ac_vo_cwmax=3
wmm_ac_vo_txop_limit=47
wmm_ac_vo_acm=0
eapol_key_index_workaround=0
own_ip_addr=127.0.0.1
wpa=3
wpa_passphrase=secretkey
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP CCMP
>How-To-Repeat:
kldload ural
ifconfig wlan0 create wlandev run0 wlanmode ap
ifconfig wlan0 inet 192.168.3.1 netmask 255.255.255.0 ssid bsdap.
Connect to see that run0 is working.
Then
ifconfig wlan0 destroy
ifconfig wlan0 create wlandev run0 wlanmode ap
ifconfig wlan0 inet 192.168.3.1 netmask 255.255.255.0 ssid bsdap country DE
authmode wpa
or alternatively
/etc/rc.d/hostapd onestart
or
hostapd -ddK /etc/hostapd.conf
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-bugs
To unsubscribe, send any mail to "[email protected]"
