https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=209468
--- Comment #22 from Maxim <[email protected]> --- Hi All! I checked the patch on FreeBSD 10.3R, the bug is fixed and the controller is work fine on new firmware. In the previously proposed patch there were inconsistencies, because of what it was not applied: Hunk #11 failed at 2921. Hunk #12 succeeded at 3702 (offset -10 lines). Hunk #13 succeeded at 3746 (offset -10 lines). Hunk #14 succeeded at 3812 (offset -10 lines). I was corrected patch, file in attachment. Test hardware: Adaptec ASR8805 BIOS : 7.11-0 (33173) Firmware : 7.11-0 (33173) Driver : 3.2-10 (1) Boot Flash : 7.11-0 (33173) CPLD (Load version/ Flash version) : 6/ 11 SEEPROM (Load version/ Flash version) : 1/ 1 Driver: aacraid0: <Adaptec RAID Controller> port 0xe000-0xe0ff mem 0xfb100000-0xfb1fffff,0xfb280000-0xfb2803ff irq 42 at device 0.0 on pci4 aacraid0: Enable Raw I/O aacraid0: Enable 64-bit array aacraid0: using MSI-X interrupts (32 vectors) aacraid0: New comm. interface type2 enabled aacraid0: ASR8805, aacraid driver 3.2.10-1 aacraidp0 on aacraid0 aacraidp1 on aacraid0 aacraidp2 on aacraid0 aacraidp3 on aacraid0 -- You are receiving this mail because: You are the assignee for the bug. _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-bugs To unsubscribe, send any mail to "[email protected]"
