https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=248264
Bug ID: 248264
Summary: arm64 / RPi4: cpu frequency control stops working
Product: Base System
Version: CURRENT
Hardware: Any
OS: Any
Status: New
Severity: Affects Some People
Priority: ---
Component: kern
Assignee: [email protected]
Reporter: [email protected]
On a recent CURRENT from the 25th of July the cpu frequency control stops
working. During boot the following error messages are displayed,
bcm2835_cpufreq0: ARM 600MHz, Core 200MHz, SDRAM 400MHz, Turbo OFF
mbox0: mbox response error
bcm2835_cpufreq0: can't set clock rate (id=4)
mbox0: mbox response error
bcm2835_cpufreq0: can't set clock rate (id=8)
The result is that the CPUs are always at the highest clockrate, even if they
are idle.
dev.cpu.0.temperature: 47.0C
dev.cpu.0.freq_levels: 1500/-1 600/-1
dev.cpu.0.freq: 1500
dev.cpu.0.%parent: cpulist0
dev.cpu.0.%pnpinfo: name=cpu@0 compat=arm,cortex-a72
dev.cpu.0.%location:
dev.cpu.0.%driver: cpu
dev.cpu.0.%desc: Open Firmware CPU
$ uname -a
FreeBSD tiny.0xfce3.net 13.0-CURRENT FreeBSD 13.0-CURRENT #14
cddea6e05fc-c270140(master): Sat Jul 25 16:18:11 CEST 2020
[email protected]:/tank/nfs_public/tiny/obj/tank/nfs_public/tiny/src/arm64.aarch64/sys/GENERIC-TCP
arm64
>From my memory, on a -CURRENT from about 14th of July the frequency control was
working as intended.
--
You are receiving this mail because:
You are the assignee for the bug.
_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-bugs
To unsubscribe, send any mail to "[email protected]"
