https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=255130
--- Comment #36 from Sriram Narayanan <[email protected]> --- (In reply to Henri Hennebert from comment #35) Ok; however the HP provided plastic is not an ADAPTOR as assumed by you. It is just a plastic piece used as a cover when SD Card Slot is not used. The plastic piece does not have any GOLDEN-Leads as in the case of an SD Card adaptor. It is just a cover to avoid dust getting in when not in use. The plastic is moulded in a shape to cover the SD slot as well as to adapt to the shape of the Laptop bottom cover. Case 1: In normal circumstance, the HP plastic cover will be plugged in always. Hence, during boot it should not throw any error. Case 2: When SD Card slot is required to be used, then the HP plastic cover will be removed. No error should occur in this stage as well. Case 3: (following Case 2) The SD Card adaptor along with the Micro SD card (OR) SD Card will be inserted. It should get mounted automatically. No Error should occur. Case 4: After using the SD Card or Micro SD Card (as the case maybe) the Card will be unmounted and removed. No Error should occur. Case 5: (following Case 4) The HP plastic cover will be reinserted to protect the slot from dust when not in use. No Error should occur. Given, the above scenarios, let me know your throughts as to which Kernel should be used or rather the modified rtsx.c or the original one with freebsd 13.0 Stable Release. The above mentioned Test Case are the Normal course of action when using the SD Card slot in my opinion. If you differ or think otherwise on the Test CASEs mentioned above; please eloborate. I will test and revert after your reply. -- You are receiving this mail because: You are the assignee for the bug. _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-bugs To unsubscribe, send any mail to "[email protected]"
