https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=235181
--- Comment #4 from Javier Sturman <[email protected]> --- ---<<BOOT>>--- Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.3-RELEASE-p7 GENERIC amd64 FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) VT(efifb): resolution 1024x768 CPU: Intel(R) Xeon(R) CPU E3-1220 v6 @ 3.00GHz (3000.00-MHz K8-class CPU) Origin="GenuineIntel" Id=0x906e9 Family=0x6 Model=0x9e Stepping=9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> IA32_ARCH_CAPS=0xa000c04<RSBA> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 68719476736 (65536 MB) avail memory = 66633228288 (63546 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <DELL PE_SC3 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 Launching APs: 1 3 2 random: entropy device external interface kbd0 at kbdmux0 efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s smbios0: <System Management BIOS> at iomem 0x8ee69000-0x8ee6901e smbios0: Entry point: v2.1 (32-bit), Version: 2.8, BCD Revision: 2.8 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <DELL PE_SC3> acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 24000000 Hz quality 950 Event timer "HPET" frequency 24000000 Hz quality 550 Event timer "HPET1" frequency 24000000 Hz quality 440 Event timer "HPET2" frequency 24000000 Hz quality 440 Event timer "HPET3" frequency 24000000 Hz quality 440 Event timer "HPET4" frequency 24000000 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 AVAGO MegaRAID SAS FreeBSD mrsas driver version: 07.709.04.00-fbsd mrsas0: <AVAGO Fury SAS Controller> port 0x3000-0x30ff mem 0x92c00000-0x92c0ffff,0x92b00000-0x92bfffff at device 0.0 on pci1 mrsas0: FW now in Ready state mrsas0: Using MSI-X with 4 number of vectors mrsas0: FW supports <96> MSIX vector,Online CPU 4 Current MSIX <4> mrsas0: mrsas_init_adapter: sc->reply_q_depth 0x1e0,sc->request_alloc_sz 0x778, sc->reply_alloc_sz 0xf00,sc->io_frames_alloc_sz 0xf100 mrsas0: max sge: 0x46, max chain frame size: 0x400, max fw cmd: 0xef sc->chain_frames_alloc_sz: 0x3bc00 mrsas0: Issuing IOC INIT command to FW. mrsas0: IOC INIT response received from FW. mrsas0: System PD created target ID: 0x0 mrsas0: System PD created target ID: 0x1 mrsas0: System PD created target ID: 0x2 mrsas0: FW supports: UnevenSpanSupport=1 mrsas0: max_fw_cmds: 239 max_scsi_cmds: 223 mrsas0: MSI-x interrupts setup success mrsas0: mrsas_ocr_thread pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0 pci2: <ACPI PCI bus> on pcib2 xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0x92d00000-0x92d0ffff at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) pci0: <simple comms> at device 22.1 (no driver attached) ahci0: <Intel Sunrise Point AHCI SATA controller> port 0x4040-0x4047,0x4048-0x404b,0x4020-0x403f mem 0x92d14000-0x92d15fff,0x92d17000-0x92d170ff,0x92d16000-0x92d167ff at device 23.0 on pci0 ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci0 pci3: <ACPI PCI bus> on pcib3 bge0: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x92a30000-0x92a3ffff,0x92a40000-0x92a4ffff,0x92a50000-0x92a5ffff at device 0.0 on pci3 bge0: APE FW version: NCSI v1.4.26.0 bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E miibus0: <MII bus> on bge0 brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Using defaults for TSO: 65518/35/2048 bge0: Ethernet address: 50:9a:4c:94:33:5a bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x92a00000-0x92a0ffff,0x92a10000-0x92a1ffff,0x92a20000-0x92a2ffff at device 0.1 on pci3 bge1: APE FW version: NCSI v1.4.26.0 bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E miibus1: <MII bus> on bge1 brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: Using defaults for TSO: 65518/35/2048 bge1: Ethernet address: 50:9a:4c:94:33:5b pcib4: <ACPI PCI-PCI bridge> at device 29.2 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci4 pci5: <ACPI PCI bus> on pcib5 pcib6: <PCI-PCI bridge> at device 0.0 on pci5 pci6: <PCI bus> on pcib6 pcib7: <PCI-PCI bridge> at device 0.0 on pci6 pci7: <PCI bus> on pcib7 vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x92800000-0x92803fff,0x92000000-0x927fffff at device 0.0 on pci7 vgapci0: Boot video device isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 pci0: <memory> at device 31.2 (no driver attached) acpi_button0: <Sleep Button> on acpi0 apei0: <ACPI Platform Error Interface> on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 orm0: <ISA Option ROM> at iomem 0xed800-0xf17ff pnpid ORM0000 on isa0 vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff pnpid PNP0900 on isa0 hwpstate_intel0: <Intel Speed Shift> on cpu0 cpufreq0: <CPU frequency control> on cpu0 hwpstate_intel1: <Intel Speed Shift> on cpu1 cpufreq1: <CPU frequency control> on cpu1 hwpstate_intel2: <Intel Speed Shift> on cpu2 cpufreq2: <CPU frequency control> on cpu2 hwpstate_intel3: <Intel Speed Shift> on cpu3 cpufreq3: <CPU frequency control> on cpu3 Timecounter "TSC-low" frequency 1499997097 Hz quality 1000 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) ugen0.1: <Intel XHCI root HUB> at usbus0 mrsas0: Disestablish mrsas intr hook uhub0 on usbus0 uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 Trying to mount root from zfs:zroot/ROOT/default []... ses0 at ahciem0 bus 0 scbus8 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ses0: cd0,pass3 in 'Slot 04', SATA Slot: scbus6 target 0 cd0 at ahcich4 bus 0 scbus6 target 0 lun 0 cd0: <PLDS DVD+-RW DU-8A5LH 6D5M> Removable CD-ROM SCSI device cd0: Serial Number 2WXYCPLC0086451X0A00 cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed da2 at mrsas0 bus 1 scbus1 target 2 lun 0 da2: <ATA SanDisk SDSSDA24 30RL> Fixed Direct Access SPC-4 SCSI device da2: Serial Number 172757804261 da2: 150.000MB/s transfers da2: 228936MB (468862128 512 byte sectors) da0 at mrsas0 bus 1 scbus1 target 0 lun 0 da0: <ATA HUS722T2TALA600 MU03> Fixed Direct Access SPC-4 SCSI device da0: Serial Number WMC6N0M1FFPK da0: 150.000MB/s transfers da0: 1907729MB (3907029168 512 byte sectors) GEOM: da2: the primary GPT table is corrupt or invalid. GEOM: da2: using the secondary instead -- recovery strongly advised. da1 at mrsas0 bus 1 scbus1 target 1 lun 0 da1: <ATA ST2000NM0018-2F3 EA04> Fixed Direct Access SPC-4 SCSI device da1: Serial Number ZDS0LJKY da1: 150.000MB/s transfers da1: 1907729MB (3907029168 512 byte sectors) uhub0: 26 ports with 26 removable, self powered ugen0.2: <no manufacturer Gadget USB HUB> at usbus0 uhub1 on uhub0 uhub1: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 1> on usbus0 Root mount waiting for: usbus0 uhub1: 6 ports with 6 removable, self powered Root mount waiting for: usbus0 ugen0.3: <American Power Conversion Smart-UPS 1000 XL FW:681.18.I USB FW:11.03> at usbus0 pchtherm0: <Skylake PCH 100 Thermal Subsystem> mem 0x2ffff03000-0x2ffff03fff at device 20.2 on pci0 ichsmb0: <Intel Sunrise Point-H SMBus controller> port 0xefa0-0xefbf mem 0xfe03b000-0xfe03b0ff at device 31.4 on pci0 smbus0: <System Management Bus> on ichsmb0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: cannot find EC device lo0: link state changed to UP bge0: link state changed to DOWN bge1: link state changed to DOWN bge0: link state changed to UP Security policy loaded: MAC/ntpd (mac_ntpd) bridge1: Ethernet address: 58:9c:fc:10:f0:40 bridge1: Ethernet address: 58:9c:fc:10:f0:40 bridge1: link state changed to UP bge0: promiscuous mode enabled tap1: Ethernet address: 58:9c:fc:10:ff:cd tap1: Ethernet address: 58:9c:fc:10:ff:cd tap1: promiscuous mode enabled epair1a: Ethernet address: 02:4e:88:ab:ea:0a epair1b: Ethernet address: 02:4e:88:ab:ea:0b epair1a: link state changed to UP epair1b: link state changed to UP epair1a: promiscuous mode enabled tap2: Ethernet address: 58:9c:fc:10:ff:ff tap2: Ethernet address: 58:9c:fc:10:ff:ff tap2: promiscuous mode enabled epair2a: Ethernet address: 02:d2:f7:0d:29:0a epair2b: Ethernet address: 02:d2:f7:0d:29:0b epair2a: link state changed to UP epair2b: link state changed to UP epair2a: promiscuous mode enabled epair1b: changing name to 'eth0' epair2b: changing name to 'eth0' tap2: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP epair3a: Ethernet address: 02:73:e6:bc:43:0a epair3b: Ethernet address: 02:73:e6:bc:43:0b epair3a: link state changed to UP epair3b: link state changed to UP epair3a: promiscuous mode enabled epair3b: changing name to 'eth0' lo0: link state changed to UP -- You are receiving this mail because: You are the assignee for the bug.
