After doing a cvsup yesterday evening i can't seem to boot on my
raid cotroller using the same kernel config.
Is -current probing hardware i a different way now or ??
Is there anyone with an answer to this ??
Kernel Config:
#Compaq SMART Array 2-SL Controller
controller ida0
device id0
controller wdc0 at isa? port IO_WD1 irq 14
disk wd0 at wdc0 drive 0
disk wd1 at wdc0 drive 1
controller wdc1 at isa? port IO_WD2 irq 15
disk wd2 at wdc1 drive 0
disk wd3 at wdc1 drive 1
device wcd0 #IDE CD-ROM
The bootmessage that i got when it was Working :
ida0: <Compaq SMART-2SL array controller> irq 18 at device 0.0 on pci2
ida0: drives=1 firm_rev=3.08
WARNING: "id" is usurping "id"'s cdevsw[]
WARNING: "id" is usurping "id"'s bmaj
WARNING: "id" is usurping "wd"'s cdevsw[]
WARNING: "id" is usurping "id"'s bmaj
id0: <Compaq Logical Drive> on ida0
id0: 17355MB (35544960 sectors), blocksize=512
~
wdc0 at port 0x1f0-0x1f7 irq 14 on isa0
wdc0: unit 0 (atapi): <CD-ROM 36X/AKW/U22>, removable, intr, dma, iordis
~
changing root device to id0s2a
The bootmessage that i have now : "Not Working"
ida0: <Compaq SMART-2SL array controller> irq 18 at device 0.0 on pci2
ida0: drives=1 firm_rev=3.08
WARNING: "id" is usurping "id"'s cdevsw[]
WARNING: "id" is usurping "id"'s bmaj
id0: <Compaq Logical Drive> on ida0
id0: 17355MB (35544960 sectors), blocksize=512
~
wdc0 at port 0x1f0-0x1f7 irq 14 on isa0
~
WARNING: "wd" is usurping "id"'s cdevsw[]
WARNING: "wd" is usurping "wd"'s bmaj
~
wdc0: unit 0 (atapi): <CD-ROM 36X/AKW/U22>, removable, intr, dma, iordis
~
~
changing root device to wd0s2a
changing root device to wd0a
rootdev=0xC1499000 error=6 panic cannot mount rootdev
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
