Is is not possible to configure and add a second disk via the
/stand/sysinstall
Label and Fdisk menu's?
I want to configure a second scsi disk to my system, but I get this message
while choosing
post-install/fdisk or label:
| |[----------------------------- Message -----------------------------]| |
| ||No disks found! Please verify that your disk controller is being ||
|
| ||properly probed at boot time. See the Hardware Guide on the ||
|
| ||Documentation menu for clues on diagnosing this type of problem. ||
|
| |}-----------------------------------------------------------(100%)--{|
|
| || [ OK ] ||
|
| |[--------------------[ Press enter to continue ]--------------------]|
|
zappa# dmesg|grep da
Mounting root from ufs:/dev/da0s1a
da1 at ncr0 bus 0 target 6 lun 0
da1: <QUANTUM VIKING II 4.5WLS 3506> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing
Enabled
da1: 4350MB (8910423 512 byte sectors: 255H 63S/T 554C)
da0 at ncr0 bus 0 target 0 lun 0
da0: <SEAGATE ST34371W SUN4.2G 7462> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing
Enabled
da0: 4094MB (8385121 512 byte sectors: 255H 63S/T 521C)
zappa# df -k
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/da0s1a 99183 23517 67732 26% /
/dev/da0s1h 1205119 704100 404610 64% /d1
/dev/da0s1e 1016303 858091 76908 92% /usr
/dev/da0s1f 744175 278633 406008 41% /usr/src
/dev/da0s1g 744175 8138 676503 1% /var
procfs 4 4 0 100% /proc
zappa# uname -a
FreeBSD zappa.demon.nl 4.0-CURRENT FreeBSD 4.0-CURRENT #62: Fri Dec 17
20:56:18
CET 1999 [EMAIL PROTECTED]:/usr/src/sys/compile/MOON i386
Did I miss something here?
Regards,
Ron.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message