Grr damn... please ignore.. I'm sorry.. not gonna post anything else.

--
Eric Futch              New York Connect.Net, Ltd.
[EMAIL PROTECTED]         Technical Support Staff
http://www.nyct.net     (212) 293-2620
"Bringing New York The Internet Access It Deserves"

On Wed, 29 Dec 1999, Eric D. Futch wrote:

I'm running 3.4-stable with source cvsup'd about a week ago.
I configed my kernel for USB support.  After turning on the USB interface
in BIOS kernel panics after it probes uchi0.  Below is the panic message
plus trace.

% uname -a
FreeBSD quake.nyct.net 3.4-STABLE FreeBSD 3.4-STABLE #3: Wed Dec 29
21:17:59 EST 1999     [EMAIL PROTECTED]:/usr/src/sys/compile/QUAKE  i386

---
uhci0: <Intel 82371SB USB Host Controller> rev 0x01 int d irq 10 on pci0.7.2>
kernel trap 12 with interrupts disabled



Fatal trap 12: page fault while in kernel mode
mp_lock = 00000002; cpuid = 0; lapic.id = 00000000
fault virtual address   = 0x0
fault code              = supervisor write, page not present
instruction pointer     = 0x8:0xc0216a74
stack pointer           = 0x10:0xc0313e18
frame pointer           = 0x10:0xc0313e38
code segment            = base 0x0, limit 0xfffff, type 0x16
                        = DPL 0, pres 1, def32 1, gran 1
processor eflags        = resume, IOPC = 0
current progess         = 0 ()
interrupt mask          = net tty bio cam   <- SMP: XXX
kernel: type 12 trap, code=0
Stopped at      INTREN+0x2c:    movl    %ecx,0(%edx)
db> trace
INTREN(a,c01fd294,c0da1000,c028d14c,0) at INTREN+0x2c
add_intrdesc(c0d93e20,400,c028a2f8,c0da1000,a) at add_intrdesc+0x29
intr_connect(c0d93e20,ffffffff,a,c01fd294,c0da1000,c028d14c,0) at intr_connect+0x2e
pci_map_int_right(c0751608,c01fd294,c0da1000,c028d14c,0) at pci_map_int_right+0x31
pci_map_int(c0751608,c01fd294,c0da1000,c028d14c,c0751608,20) at pci_map_int+0x16
uhci_pci_attach(c0751608,0) at uhci_pci_attach+0x75
pci_drvattach(c0751600,c0751600,0,7,c0322f68) at pci_drvattach+0x5f
pci_probebus(0,c02637b2,0) at pci_probebus+0x53
pci_probe(0,c0322f98,c0214d70,c0322fac,c014a1f7) at pci_probe+0x39
pci_configure(c0322fac,c014a1f7,0,320c00,326000) at pci_configure+0xa
configure(0) at configure+0x20
main(c0322fb8,0,8000,c0161189,c0403000) at main+0x83
begin() at begin+0x55
---

--
Eric Futch              New York Connect.Net, Ltd.
[EMAIL PROTECTED]         Technical Support Staff
http://www.nyct.net     (212) 293-2620
"Bringing New York The Internet Access It Deserves"



To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message




To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message

Reply via email to